Table of Contents

Advertisement

AT command
AT+CBST
Changes the bearer service
type.
[&F] [&W]
AT+CEER
Displays the reason for
disconnection of the
previous call.
AT+CGDCONT
Sets the access point name
(APN) for packet
origination.
AT+CGEQMIN
Registers a criterion to be
used to decide whether or
not to allow the QoS (quality
of service) that is informed
from the network side when
PPP packet communication
is established.
AT+CGEQREQ
Sets the QoS (quality of
service) to be requested to
network when originating a
PPP packet communication.
AT+CGMR
Displays the version of the
FOMA terminal.
n
AT+CGREG=
Specifies whether to notify
the network registration
condition.
The returned notification
displays whether you are
inside or out of service.
[&F] [&W]
AT+CGSN
Displays the product
number of the FOMA
terminal.
n
AT+CLIP=
Displays the other party's
Caller ID on a PC when a
64K data communication
call is received.
[&F] [&W]
Outline
Format: AT+CBST=<n>,1,0
n=116: 64,000bps (bit transparent) (initial
n=131: 32,000bps (multimedia)
n=134: 64,000bps (multimedia)
Result : +CEER:<report>
report: List of disconnection reasons (p.59).
p.55
p.55
p.56
n
= 0 : Not informed (initial value).
n
= 1 : Informed.
AT+CGREG?
: Displays the current setting.
+CGREG : <n> , <stat>
n
= 0 : Not display the result (initial value)
n
= 1 : Display the result
AT+CLIP?
: Displays the current setting.
+CLIP:
m
= 0 : NW setting not notifying the other
m
= 1 : NW setting notifying the other party
m
= 2 : Unknown
48
Parameter/description
value)
Informed when switching between
"Inside the service area" and "Outside
the service area" is completed.
n
: Set value
stat:
0: Out of packet area
1: Within packet area
4: Unknown
5: Within packet area
n
m
,
party of the Caller ID in outgoing
call.
of the Caller ID in outgoing call.
Command execution example
AT+CBST=134,1,0
OK
AT+CBST?
+CBST:134,1,0
OK
AT+CBST=?
+CBST:(116,131,134),
(1),(0)
OK
AT+CEER
+CEER:36
OK
p.55
p.55
p.56
AT+CGMR
12345xxxxxxxxxxx
OK
AT+CGREG=1
OK (Set to informed)
AT+CGREG?
+CGREG: 1,0
OK
AT+CGREG=?
+CGREG: (0,1)
OK
(Outside the service area)
(When you move from
"outside the service
area" to "inside the
service area".)
+CGREG:1
AT+CGSN
12345xxxxxxxxxxx
OK
AT+CLIP=0
OK
AT+CLIP=?
+CLIP:(0,1)
OK
(A call is received
when +CLIP=1 is set)
RING
+CLIP:
"090XXXXXXXX",177,
"123",136

Advertisement

Table of Contents
loading

Table of Contents