Multi Access; During A Voice Call; Mail Menu - NTT docomo FOMA N702iS Manual

<Multi access>

Multi Access

Multi Access is a function that allows voice calls,
packet communication and SMS to be conducted at
the same time. This enables you to receive mail
during a voice call or make a voice call while using
the i-mode services.
"Multi Access Combination Patterns" → P.376
Communication lines that can be used at a time
Using the Multi Access function, the FOMA terminal
can use the 3 communication lines listed below at a
time.
Type of communication
Voice call
i-mode, i-αppli, or i-mode mail
Packet communication via PC
SMS
N
Communication charges are applied for each of the lines used
during multi access communication.
You cannot use multi access during a videophone call.
However, only SMS can be received at the same time.
You cannot use multi access during 64K data communication.
However, only SMS can be sent and received at the same
time.
When you receive a call during communication
● i-mode mail received during a voice call
When you receive i-mode mail during a voice call,
the voice call screen remains on while the i-mode
mail is received. You can then read the i-mode
mail without interrupting your call.
u
" Transmission"
1
Using the Task menu to change screens → P.302
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
切替
2 Checking i-mode mail
Reading i-mode mail → P.228
u
" Talking"
3
The screen changes to the voice call screen.
N
If you receive i-mode mail or a Message R/F during a voice
call, the "Mail", "Message R" or "Message F" icon flashes and
then lights without a ring tone to notify you of the received
message.
If no operation is performed in the Received result screen, the
in-call screen reappears.
300
Lines used
1 line
1 line for one of the types
1 line
Ｒｅｃｅｉｖｅｄ ｒｅｓｕｌｔ
Ｍａｉｌ １０
ＭｅｓｓａｇｅＲ ２
ＭｅｓｓａｇｅＦ ０
Ｎｅｗ ｍａｉｌ
Ｒｅｔｕｒｎ
ＦＵＮＣ Ｓｅｌｅｃｔ
● Voice call received during i-mode or packet
communication
If you receive a voice call while using i-mode,
receiving or sending i-mode mail or using packet
communication with the FOMA terminal and PC
connected, the screen changes to the ringing screen
and you can answer the call without ending the
i-mode or packet communication.
● You cannot receive videophone calls while using
i-mode or while in the packet transmission.
r
1
The In-call screen appears, and you can talk.
■ To return to the i-mode display without
answering the call
u "
Browser"
The caller hears the busy tone with no message.
2 When you have finished talking,
press y
The call is ended and the i-mode screen reappears.
■ To return to the i-mode screen during a voice
call
u "
Browser"
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
ＤｏｃｏｍｏＴａｒｏ
To use other type of communication while communicating
You can use another type of communication without
interrupting your current communications.
● To change the screen
communication, select the function you want to view
from the Task menu.→ P.302
● Connecting to i-mode during a voice call
During a voice call, you can connect to i-mode by
pressing i and connecting from the i-mode menu
in the Main menu. →P.183
● Sending i-mode mail during a voice call
During a voice call, you can compose and send
i-mode mail by pressing i and selecting the Mail
menu in the Main menu.

During a voice call

1

Mail menu

Using menus → P.32
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
切替
Ｎｅｗｓ／Ｉｎｆｏ
▼
Ｏｈ！Ｐｈｉｌｉｐｐｉｎｅｓ
Ａｓａｈｉ Ｓｈｉｍｂｕｎ
ＤＡＩＬＹ ＹＯＭＩＵＲＩ
Ｎｉｋｋｅｉ Ｎｅｗｓ
ＣＮＮ
ＰＬＡＣＡＲ MＯＶＥＬ
Ｄｏｗ Ｊｏｎｅｓ／ＷＳＪ
ＦＯＬＨＡ ＯＮＬＩＮＥ ＪＡＰＡＮ
Ｂｌｏｏmｂｅｒｇ
Ｃｏｎｔｉｇｏ！ Ｍｏｖｅｌ
ＲＥＵＴＥＲＳ
ＦＵＮＣ Ｓｅｌｅｃｔ ＦＵＮＣ
during multi access
i
Select the
ＦＵＮＣ
Ｓｅｌｅｃｔ