NTT docomo FOMA N702iS Manual page 176

■ The number of characters that can be read
The table below shows the maximum number of
characters that can be read for each item:
Item
characters that can be read
Card read Name 16 in full-pitch, 32 in half-pitch
TEL 26 in half-pitch numbers, (, ), − and
#
E-mail 50 in half-pitch alphabets, numbers
or symbols
Memo 100 in full-pitch, 200 in half-pitch
Compose Receiver 50 in half-pitch alphabets, numbers
or symbols
message
Subject 15 in full-pitch, 30 in half-pitch
Message 128 in full-pitch, 256 in half-pitch
URL 256 in half-pitch alphabets,
numbers or symbols
Mail address 256 in half-pitch alphabets,
numbers or symbols
Phone number 256 in half-pitch numbers, (, ), −
and #
Free memo 128 in full-pitch, 256 in half-pitch
*1
Dictionary Japanese 32 in full-pitch, 64 in half-pitch
English 64 in half-pitch
*1：Available when the access reader is activated from
dictionary.
■ Guide to the scanner screen
Taking Card read for example, the following
describes the scanner screen:
Recognition
frame
Item icon
Recognized text
field
Guidance : Displays the operation
Recognition frame : Displays the recognition field
Item icon : Displays the item to scan
Card read mode:
"Name/phone number/mail address/
memo"
Compose message mode:
"Recipient/subject/message"
Recognized text field: Displays the scanned text.
Recognition mode : Displays the recognition mode
used for scanning "Lateral/
Vertical/Phone/Mail/URL"
174
Maximum number of
Guidance
Ｃａｒｄ ｒｅａｄ
Ｗｈｅｎ ｎｏｔ ｆｉｔｔｉｎｇ ｉｎ ａ ｆｒａｍｅ
Ｓｈｏｔ ａｇａｉｎ ［ ：Ｉｔｅｍ ｃｈａｎｇｅ］
ＤｏｃｏｍｏＴａｒｏ
Ｌａｔｅｒａｌ ２１Ｎｅｇａ
ＯＮ Ｒｅａｄ ＦＵＮＣ
Recognition mode NEGA mode
Remaining
characters
(The guidance appears on
some screens)
Remaining characters : Displays the number of
NEGA mode : Appears if the Negative fix is set to
the NEGA/POSI mode
Scanning text
● Before scanning, switch the lens selector switch to
(macro lens) position. → P.158
<Example: Scan text in Card read mode>
i
"Access reader"
1
The "Access reader screen" appears.
"New"
2
The "Reading mode selection screen" appears.
"Reading mode" → P.173
"Card read"
3
The "Access reader scanning screen" appears.
Use v to select the icon for the item to
4
store Display the text in the recogni-
tion field
Focus the text so that the entire text is displayed as big
as possible inside the recognition field.
If the recognition field cannot display the whole text, the
text can be scanned several times.
■ To adjust the zoom
f: Changes from "Standard" to "Large".
g: Changes from "Large" to "Standard".
■ To turn on the light
o (ON) or a (
To turn off the light, press o (OFF) or a (
half-pitch characters left
that can be scanned
Ａｃｃｅｓｓ ｒｅａｄｅｒ
Ｎｅｗ
Ｒｅａｄｉｎｇ ｄａｔａ ｌｉｓｔ
Ｓｅｌｅｃｔ ＦＵＮＣ
Access reader
Function menu P.172
Ｒｅａｄｉｎｇ ｍｏｄｅ
Ｃａｒｄ ｒｅａｄ
Ｃｏｍｐｏｓｅ ｍｅｓｓａｇｅ
ＵＲＬ
Ｍａｉｌ ａｄｄｒｅｓｓ
Ｐｈｏｎｅ ｎｕｍｂｅｒ
Ｆｒｅｅ ｍｅｍｏ
Ｓｅｌｅｃｔ
Ｃａｒｄ ｒｅａｄ
Ｗｈｅｎ ｎｏｔ ｆｉｔｔｉｎｇ ｉｎ ａ ｆｒａｍｅ
Ｓｈｏｔ ａｇａｉｎ ［ ：Ｉｔｅｍ ｃｈａｎｇｅ］
ＤｏｃｏｍｏＴａｒｏ
Ｐｌｅａｓｅ ｓｈｏｔ
ａ ｎａｍｅ
Ｌａｔｅｒａｌ ３２
ＯＮ Ｒｅａｄ ＦＵＮＣ
Access reader
scanning
Function menu P.175
)
).