NTT docomo FOMA N702iS Manual page 295

N
You cannot copy SMS by box or folder.
You cannot protect SMS move or copied to the FOMA card
(UIM). If you move or copy protected SMS to the FOMA card
(UIM), the protection is removed from the messages on the
FOMA card (UIM). "Replied to" or "Transferred" icon is also
changed to "Read".
When you move or copy SMS to the FOMA card (UIM), the
stored SMS is displayed in the Inbox/Outbox folders
regardless of the folder in which the SMS was saved.
When the " ", " " or "
cannot move or copy SMS.
If you remove the battery pack, the dates and times for sent
SMS stored on the FOMA card (UIM) are erased and they
appear at the end of the list. However, if an SMS report is
stored with the sent SMS, the date and time are not erased.
<Infrared data exchange>
Forwarding Data by Infrared Data
Exchange
You can exchange the data such as phonebook
entries and received mails with other devices with
the infrared data exchange function.
● The infrared data exchange function of the FOMA
terminal conforms to the IrMc1.1 standard. However,
you may not be able to forward data depending on
the other party's device or the application even when
IrMC1.1 is supported.
● You can forward the data one by one or all data at
one time.
● You can forward the followings:
・Phonebook ・Personal data in Own number
・Schedule ・ToDo
・Draft mail ・Sent mail
*1
・Still image ・Text memo ・Bookmark
*1 ： You cannot send all the data at once.
(red)" icon is displayed, you
・Received mail
*1
・Melody
When you forward data
● Set the receiving device ready to receive and start
sending within 30 seconds.
● Place the devices so that the Infrared data ports are
aligned on the same level and facing each other.
● Do not move the devices until the confirmation
message about completing the exchange appears.
Also, do not place anything between the devices or
cover the Infrared data ports.
● The devices may not communicate successfully if
they are placed in direct sunlight, directly under a
fluorescent light, or close to other infrared equipment.
Sender
Infrared data port
Within the range
of ±15°
Within the
range of ±15°
Within 20 cm
Note on forwarding data
● You cannot forward data while running another
function. Also, you cannot use another function while
forwarding data.
● You cannot forward data while PIM lock, All lock or
Self mode is set. Also, you cannot send/receive the
phonebook data while keypad dial lock is set.
● You cannot receive the phonebook data while
Restrict dialing is set. However, you can send the
phonebook data which is set to "Restrict dialing" and
"Own number" data when sending the phonebook
data.
● You may not be able to forward data depending on
the status of the other party's device. Also, depending
on the model of the other party's device, it may not
reflect the settings of the received mail or bookmark
folder tree, or it may not receive the Deco-mail
correctly.
● You may not be able to forward data by infrared data
exchange when the FOMA USB Cable (optional) is
connected.
● The FOMA terminal is set to Out of Area during the
data exchange, which means you cannot make/
receive a voice/videophone call or use i-mode, i-mode
mail, packet communication or 64K data communication.
Also, the FOMA terminal may remain the status of
Out of Area after the data exchange.
● It may require time to exchange data depending on
the amount of data. Also, you may not be able to
receive data.
● The progress bar indicates the number of sent data.
A large amount of data may slow down the progress
indicator or it may look different between the parties
even when the data
successfully.
Receiver
are being exchanged
293