Page 2
Introduction Viewing this manual Thank you for purchasing "F-03E" mobile terminal. ・ In this manual, "F-03E" mobile terminal is usually referred to Before using your terminal, or when necessary, read this as "the terminal". manual to ensure safe use and handling. ・...
Contents ■ Basic package ............1 Calling......... 61 ■ Before using the terminal ........4 ■ Precautions (Always follow these directions) ..5 Making a call ..............61 Receiving a call ............... 63 ■ Handling precautions ..........16 Operation during a call ..........64 ■...
Page 5
Apps................105 Calculator ..............164 Accounts & sync ............106 Electronic dictionary............. 164 Lock/Security..............106 Search................165 Illumination ..............118 Document Viewer ............166 Setting my body ............119 SD card backup............. 166 Slide-in function............120 Health Diary∼Karada Life∼ .......... 168 Language & input ............120 International roaming ....169 Date &...
・ In the terminal, as it is for a PC, some applications that you Before using the terminal install may give instability of the operation, or may send your location information or personal information registered to the terminal to outside via the Internet and the ・...
・ The software on the terminal can be updated with the latest Precautions (Always follow information.→P187 ・ Improving the terminals quality or upgrading operation these directions) system may be included in the software update. And some applications used in the previous version may not be ・...
■ Precautions contain the description below. Handling the terminal, battery pack, adapter, wireless charger, This symbol denotes that the action is docomo mini UIM card and touch pen (common)....6 prohibited. Don’t Handling the terminal..............8 Handling battery pack ...............10 This symbol denotes that disassembling the Handling adapter and wireless charger........11 phone or its components is not allowed.
Page 9
Hearing aids, implanted pacemakers or defibrillators, other Use the battery pack and adapter specified by electronic medical equipment, fire alarms, automatic doors and NTT DOCOMO for your terminal. other automatic control equipment. May cause fire, burns, injuries, electric shock. Users wearing implanted pacemakers or defibrillators or other...
Turn the terminal OFF and stop charging before Store the equipment out of reach of small entering a place such as a gas station where children. flammable gases are generated. May be accidentally swallowed or cause injuries. The gas may catch fire. Be careful especially when using the terminal When using Osaifu-Keitai in a place as a gas station, turn connected to the adapter continuously for a long...
Page 11
Do not put foreign objects such as liquid like When you use electronic medical equipment, water, metal pieces or burnable things into check with the equipment manufacturer to docomo mini UIM card slot or microSD card slot. determine how the device is affected by radio Don’t May cause fire, burns, injuries, electric shock.
If the display part is accidentally broken and the DANGER liquid crystal leaks out, do not make the Do not connect a wire or other metal objects to substance contact with your skin of face or Don’t the jack. And, do not carry or store the terminal hands.
◆ Handling adapter and wireless charger If the battery pack leaks or gives off a strange smell, immediately remove it from the vicinity of open flames. WARNING The vapors from leaking battery pack fluid may ignite or explode. Do not use the adapter cord if it gets damaged. May cause fire, burns, electric shock.
Do not apply an electrical transformer for When you disconnect the power plug from the overseas use to the wireless charger. outlet or cigarette lighter socket, do not pull the May cause overheat, ignition, or electrical shock. adapter cord with excessive force. Instead, hold Don’t the adapter to disconnect.
◆ Handling the touch pen Turn the terminal OFF in crowded trains or other public places where pacemaker or defibrillator wearers could be nearby. CAUTION The terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices. Do not point to someone with the touch pen.
◆ Material list Part Material/Surface treatment External Body PC resin/UV hard coating Part Material/Surface treatment connection Flexure Elastomer resin jack cap Exterior case Front case PC-GF resin/UV hard coating Water stop PC resin Back case PC resin/UV hard coating Water stop Silicone rubber Back cover PC-GF resin/UV hard coating...
Page 17
■Wireless charger F03 ■Touch pen F03 Part Material/Surface treatment Part Material/Surface treatment Wireless Upper and PC resin/HN-3009G Strap Nylon charger lower case ABS resin/Coating Lamp leader Acrylic resin/HN-3009G Conduction nylon Cushion Urethane Grip Al/Alumite Dedicated Upper case PC resin/N-TONE 17G Ring POM resin AC adapter...
・ Do not place the terminal near an air-conditioner outlet. Handling precautions - The rapid change in temperature may cause condensation, causing internal corrosion and malfunction. ・ When using, be careful not to subject excessive force to the ◆ General terminal or the battery.
・ ・ Maintain a separate record of the data you saved in the While microSD card is being used, do not take the card out terminal. and do not turn off the terminal. - If the data is deleted, DOCOMO assumes no responsibility - May cause data loss or malfunction.
・ They may cause the battery pack performance to be Do not bring magnetized objects close to the wireless degraded or its lifetime to be shortened. charger. A recommended battery level to keep the battery pack is - Bringing strong magnetism close may cause a approximately 40% of remaining battery level as a guide.
◆ The touch pen : All bandwidths between 2400 MHz and 2483.5 MHz are used, and the bandwidth used by mobile ・ When operating the terminal, do not use a touch pen etc. object identification devices cannot be avoided. other than the included touch pen. Available channels vary by countries.
Page 22
a 2.4 : Radio equipment that uses the 2400 MHz band. ◆ Wireless LAN (WLAN) b DS : The modulation is the DS-SS method. ・ Wireless LAN (WLAN) exchanges information using radio c OF : The modulation is the OFDM method. waves, and allows you to freely establish LAN connection if d 4 : The expected interference distance is 40 m or shorter.
Page 23
2. If this device generates harmful radio wave 5.6 GHz band interference against in-plant radio stations for Channel number (Ch) Frequency bands (MHz) identification of mobile objects, change the using 5,500 frequency promptly or stop using wireless LAN function, and contact "General Inquiries" on the last 5,520 page of this manual, then consult about treatment for 5,540...
・ ◆ FM transmitter Do not alter the basic software. Repairs may be refused as a modification of software. ・ FM transmitter function of the terminal uses weak waves requiring no licenses for radio stations. ・ It uses 78.4 - 89.6MHz frequency band. When using, set to a Waterproofness/Dustproofness different frequency from FM radio stations of the area you use so as to avoid affecting FM radio users in neighborhood.
Page 25
❖ What you can do with waterproofness of ◆ To ensure waterproofness/dustproofness F-03E To avoid water/dust ingress, be sure to observe the following ・ points. You can talk and watch 1Seg without an umbrella in the ・ Do not throw any liquid other than room-temperature tap rain (for rainfall of 20 mm or less per hour).
Page 26
・ ◆ Important precautions Steadily attach the back cover without any space between and firmly close the external connection jack. Even a fine Do not perform actions shown in the illustrations below. obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.
Page 27
・ Do not move the terminal in water or slam the terminal against the surface of water. DOCOMO does not guarantee actual operations under all ・ If you put the terminal in tap water or in water of swimming states. Malfunctions deemed to be caused by pool, be sure to have it within 30 minutes.
Page 28
・ b Shake the terminal approximately 20 times, firmly holding If mud or soil is adhered to the terminal, do not operate the terminal. Eliminate the dirt first by shaking several times in it, until there is no more water splattering. tap water of wash-basin and then wash the terminal with running water.
Page 29
◆ Charging Check the following before and after charging. ・ Check if the terminal is not wet. Never try to charge the battery pack when the terminal is wet. ・ Accessories and optional devices are not waterproof/ dustproof. ・ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before putting the terminal on the included wireless charger or opening the external connection jack cap.
<Functions> Before using the terminal a Stereo earphone jack (waterproof) * If you insert the plug of the stereo earphones, the earphone connecting MIC selection screen appears.→P98 b External connection jack Connect optional AC Adapter 03 etc. Part names and functions c TV/FM transmitter antenna * Extend when watching 1Seg/Mobacas/using FM transmitter.
Page 31
m Strap hole u Back cover When attaching a strap, remove the back cover, hang the * To access docomo mini UIM card slot and the microSD card slot, strap on the hook, and then securely attach the back cover. remove the back cover and the battery pack.
Corner cut docomo mini UIM card docomo mini UIM card The docomo mini UIM card is an IC card in which user information such as your phone number etc. is saved. ・ You can use the terminal only with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.
◆ Security code of docomo mini UIM ◆ Installing/Removing microSD card card ・ A microSDHC card (sample) is inserted when purchased. Before using, refer to the instruction manual for microSDHC There is a security code called PIN code in the docomo mini card.
■ Removing Battery pack a Push the microSD card lightly and then release it, then pull the microSD card straight out ◆ Attaching/Removing battery pack ・ Attach/Remove the battery pack after turning OFF the power. ・ When you attach/remove the back cover, hold the terminal in your hand so that you will not scratch the display etc.
Page 35
Check the tilt of the back cover, and attach it fitting to the b With the"NTTドコモ (NTT DOCOMO)" printed side of the battery pack facing up, align the metal contacts of the terminal by pressing down battery pack with those of the terminal, insert in the direction of a and attach in the direction of b <Note>...
e Press marked parts firmly to close securely. ・ Charging Check if there are no gaps in order to maintain waterproofness/dustproofness, and attach securely. * "Waterproofness/Dustproofness"→P22 ❖ Precautions on charging ・ If you use the terminal while charging, it may take time to complete charging or charging may not complete.
Page 37
❖ ・ Battery pack life Right after the battery pack is removed and reattached, the correct battery level may not be shown. While using, the ・ The battery pack is a consumable part. Each time it is battery level indicator is corrected. charged, time available with each charging reduces.
Page 38
◆ Charging with the wireless charger DC input jack You can charge with the optional Wireless charger F03. ・ Products marked by comply with the international Connector standard for interoperable wireless charging by Wireless Power Consortium. To AC 100V Indicator LED a Insert the dedicated AC adapter connector for Wireless outlet charger F03 into the DC input jack on the back side of the...
・ If the charge information rapidly flashes or turns off before - Depending on the screen displayed, the clock may not be the charging is complete, remove the terminal from the displayed because the terminal recognizes that operations wireless charger and put it on again, or remove and reinsert or functions are in process.
To AC 100V outlet Turning power ON/OFF Power plug AC adapter ◆ Turning power ON main unit Press and hold X (2 sec. or more) until the indicator LED lights green and vibrator operates The lock screen appears following the startup screen. USB plug microUSB On the lock screen,...
・ ■ Changing the Home application Touching the touch panel may not work in the following cases. Note that it may cause malfunction. [docomo Palette UI] is set in Home screen for the first - Operation with gloved hands activation. To change to [NX!Home] etc., from the Home - Operation with tip of fingernail →[Settings]→[Display]→Select a home screen,...
❖ ❖ Touch and hold Pinch Touch the screen for a while. You sometimes need to keep Touch the screen with two fingers and widen (pinch-out) or touching the screen and perform next operation without lifting narrow (pinch-in) the fingers distance. your finger or the touch pen.
◆ Switching the portrait/landscape view Character entry The terminal supports a motion sensor that senses orientation or motion of the terminal. You can switch display view by Enter characters using software keyboard displayed on the tilting the terminal vertical or horizontal (Auto-rotate screen→ screen.
Page 44
■ QWERTY keypad : Restore the latest fixed text to the original. : Display characters assigned in the numeric keypad Enter characters using Romaji input. input in the reverse order. : Move the cursor to left. : Switch uppercase and lowercase in alphabet input. ・...
❖ d Handwritten input area : Write a character with your finger Switching keypad to enter. ・ When you write a character, a recognized character ■ Numeric keypad and QWERTY keypad appears on the top of input area. When the numeric keypad or QWERTY keypad ・...
Page 46
■ Gesture input ◆ Convenient input function If you tap and keep your finger on the key assigned the You can enter pictograms, symbols, phrases or enter by character you want to enter, characters (gesture guide) will be quoting from Phonebook or Password manager data. Also, displayed around that key.
Page 47
❖ Entering from the phrase/character code Perform required operations table Quoting from Phonebook : [電話帳/ATOKダイレクト (Phonebook/ATOK direct input)]→Select a name in the → contacts list→Mark item→[OK] Quoting from Password manager : [Password manager] ・ When is displayed on the keypad, tap it to perform →Authenticate→Select a title→...
Page 48
◆ Switching to other input method Numeric keypad settings : Set Input mode (Flick input/ Numeric keypad input/Gesture input), Flick input setting You can also switch to another input method such as the (multi-tap input, Flick guide, Flick Sensitivity, Modifier Android keyboard to enter characters.
Page 49
❖ ・ Registering words (User dictionary) If you register automatically learned words when fixing entered characters, Unmark [自動登録単語は含めない You can register frequently used words to a user dictionary in (Not included auto-registered words)]. advance. When you enter characters with the same reading, ❖...
(Copy) →[初期化 (Initialize)]→[は Restoring to the default : い (Yes)] The text is copied to the clipboard. ❖ ◆ Editing text Pasting a text You can copy texts in the character entry field, web page or Move the cursor to the destination to paste and received mail and cut and paste texts in the character entry touch and hold→[PASTE] field.
From the Home screen, →[Settings]→ Initial settings [Initial settings]→[Easy data transfer support] Check guidance for each data restore location and tap [OK]. Then follow the onscreen instructions. You can set necessary items collectively for the first time to ・ If you do not want to display the guidance screen next use the terminal.
Indicator LED Screen/Icon Indicator LED notifies the terminal states such as charging ◆ Keys on the navigation bar and missed call by lighting or flashing. ・ Operation keys (icons) appear on the navigation bar shown at The illumination lights according to the illumination the bottom of the screen.
Page 53
■ Main notification icons : Screen is zoomed in with Best-fit zoom. : Screen is fixed with Shake to unrotate. : New Gmail : Positioning with GPS : New Email : FM transmitter ON : New sp-mode mail : FM transmitter OFF due to conflict with other application : New SMS : Receiving Mobacas : New Area Mail...
・ If the screen lock authentication is disabled, the Notification panel can be opened on the lock screen. ◆ Task manager If you stop operation of an application by tapping etc., the application may remain active in the background. Also, 2 or more applications may be running depending on the operations.
Touch and hold a shortcut etc. you want to From the Home screen, →[Settings]→ delete→[Delete] [Display]→[Customize screen]→Set each item ・ Alternatively, after touching and holding the shortcut, ◆ Adding/Deleting home screens drag it to at the bottom of the screen to delete. ❖...
◆ Application list Application screen ・ Some applications require separate subscriptions (charged) to be used. Display the Application menu so that you can activate Chrome : View web pages like on a PC. registered applications or change the terminal settings. docomo Wi-Fi Easy Connection : An application which helps you use public wireless LAN provided by DOCOMO, ◆...
Page 60
Play Books : View downloaded e-books. Navigation : Search routes toward destinations using Play Music : Play music. Google Maps Navigation. Play Movies & TV : Rent movies to watch. You can フォトコレクション (Photo Collection) : Upload photos and download movies to watch anytime you want. videos to view and arrange them on the Cloud.
Page 61
◆ Managing Application menu Search : Search functions in the terminal or website.→P165 Disaster kit : Check received early warning "Area Mail", make settings and record/check messages on the docomo When the Application menu is displayed, Disaster Message Board. perform target operations Infrared : Send or receive data such as phonebook entries Uninstalling an application : Touch and hold an...
Page 62
◆ Installing "Recommends" applications Tap [Recommends] tab to display applications recommended by NTT DOCOMO. From the Home screen, →[Recommends]→[ おすすめアプリを見る (View recommended apps)]→Select application→Download application following the onscreen instructions ・ Downloaded applications are displayed in the [Download Application] group in the Application menu.
Calling ◆ Emergency call ・ This terminal supports "Emergency call location notification". If you use the terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from Making a call (location information) is automatically notified to the Emergency call acceptance organization such as the Police...
Page 64
From the Application menu, [Phone]→[Dial]→ ◆ Entering touch-tone signals (DTMF tones) Enter an emergency number Police call : 110 Enter a pause (;) following phone number to send touch-tone Fire and emergency rescue : 119 signals. Touch-tone is used for services such as listening to Marine emergency : 118 messages on your home answering machine, ticket reservations and bank balance inquiries.
◆ International call (WORLD CALL) Receiving a call Enter "+" to make an international call. Touch and hold "0" to enter "+". A call is received ・ Using overseas→P169 ・ For details of "WORLD CALL", contact "General Inquiries" on SD : Stop ringtone sounding or vibration. the last page of this manual.
Subscription to Call waiting is required. Operation during a call ◆ Call volume ・ The call volume can be adjusted only during a call. The following operations are possible in the screen during a call. During a call, SD ◆ Voice clear The terminal senses ambient noise during a call and make the other party's voice to be heard clearly by emphasizing hard hearing part of the voice per sound range or adjusting...
d Log icons ◆ Voice adjust for outgoing call, for incoming call, This function makes voice sound during a call to be heard for missed call appear respectively. clearly according to your age or taste. During a call, strength of e International call icon adjustment can be set.
Page 68
Set required items Open source licenses : Confirm open source licenses. Decline call : Set conditions for the party to decline the Network service : The following DOCOMO network incoming call. services are available. ・ In [Blacklist], you can add up to 100 phone numbers. Koe-no-Takuhaibin : Use service, or check/change the Reverb suppression : Set whether to eliminate settings.
e Index button Phonebook Display the data registered in Phonebook separating … … by "あ, か, さ (a, ka, sa )".→P68 ■ Phonebook list menu You can enter phone numbers, email addresses, etc. to Phonebook. You can contact registered parties through By tapping on the phonebook list, you can operate the simple operation.
❖ Registering to Phonebook from a history ◆ Searching a phonebook entry You can search phonebook entry by Japanese syllabary. In the log screen select a party→[Add In the Phonebook list, [Index] Phonebook] ・ Select an account if required. Letters of the character lines of Japanese syllabary, "あ, …...
❖ ◆ Displaying phonebook entries by Registering a group in Phonebook group In the group list, touch and hold a phonebook You can display phonebook entries data by group specified in entry→Drag & drop it to a group to be registration.
Page 72
f SMS ◆ Timeline Tap to send an SMS. g Sending Koe-no-Takuhaibin Display the timeline of SNS ・ Blog by "Friends NEWS" function and "My SNS". Tap to send a Koe-no-Takuhaibin. * To display, start use of Cloud. ■ Profile screen menu From the Application menu, [docomo By tapping on the profile screen, you can perform...
❖ Creating name card ✔INFORMATION ・ To share all phonebook data with another terminal, import/ You can create your name card from My profile to exchange export data via infrared communication or using phonebook with the other party. copy tool. ・...
Mail/Browser ✔INFORMATION ・ SMS can be also sent to or received from the parties using overseas network operators. For countries and overseas network operators available, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO International sp-mode mail Services website. ・...
◆ Displaying received SMS [Delete] ◆ Setting SMS From the Application menu, [Messaging] Select a message thread From the Application menu, [Messaging]→ →[Settings] ◆ Replying to SMS Set required items From the Application menu, [Messaging] Delete old messages : Set whether to delete old messages if the number of saved messages reaches upper limit.
In the option settings screen, set the email Email check [Inbox check frequency], etc.→[Next] On the mail account registration screen, [Your Set mail accounts provided by mopera U or general providers name]→Enter your name→[Next] to use Email. ◆ Setting up a general provider mail ◆...
◆ Composing and sending email ◆ Receiving/Displaying emails From the Application menu, [Email] From the Application menu, [Email] ・ ・ If you have several mail accounts, tap account at the top If you have several mail accounts, tap account at the top of the screen to switch.
❖ ◆ Forwarding emails Setting Email account Display an email→ →[Forward]→[To]→Enter From the Application menu, [Email] a mail address→ →[Settings]→Select an account ◆ Deleting emails Set required items Account name : Edit account name. Display an email→ Your name : Edit name. Signature : Register signature.
❖ Refreshing Gmail Gmail In the inbox, The inbox is refreshed with Gmail on the terminal and Gmail is a Google online email service. You can send and Gmail on the website synchronized with each other. receive emails using Gmail on the terminal. ・...
◆ Setting Early warning "Area Mail" Early warning "Area Mail" From the Application menu, [Disaster kit]→ →[Settings] [Early Warning "Area Mail"]→ This is a service with which you can receive emergency earthquake flash report delivered by the Meteorological Set required items Agency etc.
Google Talk Browser Google Talk is an online instant message service provided by You can view web pages like on a PC using Browser. Google. You can enjoy chat with Google members by using On the terminal, Browser can be used over a packet Google Talk on the terminal.
◆ Activating Browser to display a ◆ Displaying web pages from history website → When a web page is displayed, From the Application menu, [Browser] [Bookmarks]→[HISTORY] ・ The preset home page is displayed. To display the history of frequently viewed web pages, tap [Most visited].
◆ Registering a bookmark to quickly When a web page is displayed, slide the screen display a web page downward→ at the top of the screen→[Yes] The notification icon appears on the status bar. ❖ Registering a bookmark ・ Also, →Tap [Prefetch Cache] to operate.
Page 84
◆ Web page link operations ◆ Searching words on websites in dictionary Operate a link displayed on a web page. Search words on a website in a dictionary. ・ Tap a web page to open. ・ Set [Display balloon] in [General] of browser setting to use. ・...
Page 85
・ ◆ Setting Browser When "Auto-fit pages" is marked, displayed texts or other items in the web page are automatically optimized for the screen. →[Settings] When a web page is displayed, Double-tap a line of text to fit in the width of the screen →[General]/[Privacy &...
Settings ■ WIRELESS & NETWORKS Menu Page Wi-Fi Easy Wi-Fi AOSS system Setting menu registration WPS system Bluetooth You can make various settings in the menu displayed from the FM transmitter Radio frequency →Select [Settings]. Home screen, More... Data usage ■...
Page 87
■ DEVICE Menu Page Display Brightness Menu Page Sleep/Lit when held Sound and Vibration Volumes Photo Screen Alert sensitivity Wallpaper Public mode Homescreen selector Manner mode Lock screen enable MIC input Lock screen timeout Phone ringtone Clock when on charger Missed call LED Customize screen Notification sound...
Page 88
Menu Page Menu Page Storage Unmount SD card/Mount Security Screen lock auth SD card Security unlock preference Erase SD card Fingerprint settings Unmount USB storage/ Owner info Mount USB storage Set up SIM/RUIM card lock Battery Make passwords visible NX! eco Password manager Apps Privacy mode settings...
Page 89
Menu Page Menu Page More... Setting my body Developer options USB debugging Slide-in function Development device ID Language & input Stay awake Allow mock locations Strict mode enabled Backup & reset Pointer location ー ■ SYSTEM Show touches Show CPU usage Menu Page Window animation scale...
✔INFORMATION WIRELESS & NETWORKS ・ To use USB debugging function for [Developer options], install USB driver to a PC. For details, refer to the information about this product in the following site. ◆ Setting access point (APN) http://spf.fmworld.net/fujitsu/c/develop/sp/android/ (in Access points for connecting to the Internet (sp-mode, mopera Japanese only) ・...
Page 91
Setting mopera U ❖ Initializing an access point mopera U is ISP of NTT DOCOMO. If you have subscribed to By initializing an access point, the default state is restored. mopera U, you can use Internet after making the simple settings.
Page 92
❖ ◆ Wi-Fi Connecting to network with Wi-Fi ON With Wi-Fi function of the terminal, you can use mail or access →[Settings] From the Home screen, the Internet by connecting to the home or company network or public wireless LAN access point. Set [Wi-Fi] to [ON] To connect to a LAN access point, you need to set connection [Wi-Fi]→Select a Wi-Fi network...
Page 93
❖ ❖ Scanning Wi-Fi network Disconnecting Wi-Fi network ・ Set Wi-Fi to ON in advance. →[Settings]→[Wi- From the Home screen, From the Home screen, →[Settings]→[Wi- Fi]→[SCAN] Select a connected Wi-Fi network→[Forget] ❖ Adding Wi-Fi network ✔INFORMATION Enter network SSID or security to add Wi-Fi network manually. ・...
Page 94
✔INFORMATION ✔INFORMATION ・ ・ [Wi-Fi Auto ON/OFF] does not work if Airplane mode or Wi-Fi For some wireless LAN access points, AOSS™ connection tethering is ON. may not be established. If connection is failed, use WPS ・ The terminal may not connect automatically even when [Wi- connection or connect manually.
◆ Data usage ◆ Connecting VPN (Virtual Private Network) You can enable Internet access via mobile network, set limit of mobile data communications on graph or set alert when usage VPN (Virtual Private Network) is a technology to connect to the exceeds the limit.
❖ ❖ Disconnecting VPN USB tethering If you connect the terminal with the optional USB Cable for PC Open the Notification panel connection T01 to use as a modem, you can access the Select a notification of VPN connecting Internet. Connect the terminal and a PC with the USB On the VPN setting screen, tap connected VPN cable...
❖ ❖ Wi-Fi tethering Simple registration of Wi-Fi device You can allow Wi-Fi devices to access the Internet by using the Register Wi-Fi device supporting AOSS™ or WPS. ・ terminal as Wi-Fi hotspot. Set Wi-Fi tethering to ON in advance. ・...
◆ Wi-Fi direct Sound and Vibration Connect between Wi-Fi Direct devices without routing an access point etc. ◆ Manner mode ・ To use this function, acquire and install an application to use Wi-Fi Direct function from Play Store. Set/Cancel Manner mode. →[Settings]→In From the Home screen, ・...
❖ ❖ Changing Manner mode type Original manner →[Settings]→ →[Settings]→ From the Home screen, From the Home screen, [Sound and Vibration]→[Manner mode]→ [Sound and Vibration]→[Manner mode]→ [Select manner mode] [Original manner settings] Selecting an item [Volume] Manner mode : All sounds do not sound from the [Call ringtone volume]/[Media volume]/[Alarm terminal's speaker.
◆ Missed call LED ◆ Volumes Set missed call LED color for missed call or phone memo You can adjust volume of ringtone/notification sound, media recorded. playing sound, alarm sound. From the Home screen, →[Settings]→ From the Home screen, →[Settings]→ [Sound and Vibration]→[Missed call LED]→...
◆ Sleep/Lit when held ✔INFORMATION ・ When ringtone is set for contacts, ringtone for contacts is ❖ Sleep given priority. Set screen timeout. Display From the Home screen, →[Settings]→ [Display]→[Sleep/Lit when held]→[Sleep]→ Select a time ◆ Brightness ❖ Keep lit when held Set brightness of screen backlight.
◆ Photo Screen ◆ Lock screen timeout Set a background image for lock screen. Set lock screen timeout. From the Home screen, →[Settings]→ From the Home screen, →[Settings]→ [Display]→[Photo Screen] [Display]→[Lock screen timeout]→Select a time [Picture settings]→Set each item ・ ✔INFORMATION When you select [Flickr]/[Picasa], images matching a keyword are obtained automatically and displayed in...
◆ Battery icon ◆ Font settings Change the battery icon. Change display font type. From the Home screen, →[Settings]→ From the Home screen, →[Settings]→ [Display]→[Battery icon]→Select an icon [Display]→[Font settings]→Set a font→[OK] ・ With [Original handwriting font] selected, you can ◆...
◆ Font size ◆ Shake to unrotate Change font size. You can return screen rotated by [Auto-rotate screen] to original orientation by shaking the terminal twice or more. From the Home screen, →[Settings]→ From the Home screen, →[Settings]→ [Display]→[Font size]→Select a size [Display]→[Shake to unrotate]→Set each item ◆...
Multimedia Storage ◆ Video correction/Picture correction ◆ Checking the memory space Set whether to correct image quality of videos (TV, YouTube, You can check memory space of the terminal, microSD card, etc.) and still images (Gallery). and USB mass storage connected via USB. →[Settings]→...
✔INFORMATION Battery ・ The priority of eco-mode operations is as follows: a Instant eco-mode, b Battery care eco-mode, c Timer eco-mode. ・ When [Cancel eco-mode when charging] is marked, eco- Check battery usage status. mode is canceled while the battery is charging. →[Settings]→...
◆ Uninstalling applications Apps ・ For deleting the applications you obtained from Play Store, operating from the Google Play screen is recommended.→ ◆ Viewing permitted operation of the P130 ・ applications in the terminal You cannot uninstall some pre-installed applications by default.
◆ Setting automatic synchronization ✔INFORMATION ・ When you disable an application, some other applications →[Settings]→ From the Home screen, linked to the disabled application may not be operated [Accounts & sync] correctly. In such case, enable the application again to operate them correctly.
❖ Network security code Notes on the security codes The network security code is a 4-digit number necessary for ・ To set a security code, avoid imaginable numbers such identification or using the docomo Network Services at as "birth date", "a part of phone number", "street reception of your request in docomo Shop or at a docomo address or room number", "1111"...
・ ◆ Setting the PIN code If you enter a wrong PIN code 3 times consecutively, the PIN code is locked and cannot be used anymore. In this case, ❖ unlock with "PUK". Unlock the PIN code before setting new Setting up SIM card lock PIN code.
❖ Entering the PIN code ◆ Security lock By setting to require authentication on the locked screen, you Turn power ON→Enter PIN code on the PIN can prevent others from misusing the terminal. code entry screen→[OK] You can also use authentication operation set in Security ❖...
Page 112
❖ Setting security unlock method ✔INFORMATION ・ To vibrate when authenticating by an unlock preference other Set unlock the screen lock or type of authentication operation than face recognition, from the Home screen, → for Password manager. [Settings]→[Security]→Mark [Vibrate on touch] From the Home screen, →[Settings]→...
Page 113
❖ ❖ Unlocking the screen Displaying owner information on the lock screen In sleep mode, press X/the fingerprint sensor From the Home screen, →[Settings]→ →Unlock according to On the lock screen, [Security]→[Owner info] the security unlock preference Enter owner information ・...
Page 114
・ ・ Authentication performance (the probability of successful If the fingerprint is not correctly read, a warning message fingerprint authentication for correct sliding of the finger) appears. ・ depends on the condition of use. The following finger If fingerprint registration or authentication is started with the conditions may make fingerprint registration difficult or finger put on the fingerprint sensor, activation may be reduce the authentication performance.
Page 115
❖ ・ Registering fingerprint The following conditions may cause failure or damage: - Strike or give a hard shock Register your fingerprint for authentication. - Scratch or pick with a pointed object ・ To use fingerprint authentication, register 2 or more - Rub hard with a fingernail or hard object such as metal fingerprints.
◆ Displaying password ◆ Privacy mode You can set the entered characters to be visible for entering a If Privacy mode is set, you can hide bookmarks for browser, password. pictures, or applications (when Home application is set to NX!Home). If you download application compatible with From the Home screen, →[Settings]→...
Page 117
❖ Privacy mode settings Set required items Phonebook/History : Set whether to hide specified ・ To set Privacy mode, set security unlock preference in phonebook entry/group in privacy mode. advance.→P110 Phonebook setting : Specify phonebook entry/group to be From the Home screen, →[Settings]→...
Page 118
❖ Privacy mode operation settings (Action Set required items when call received) Home/Browser/Picture : Set to hide icons of specified applications on the Home screen or hide specified Set actions for incoming call or mail. bookmarks, folders/albums or images in privacy mode. ・...
Page 119
❖ Activating/Deactivating Privacy mode ◆ Managing authentication information You can install authentication information for accessing Flick the battery icon to the right with the security-protected Wi-Fi networks or VPNs or other certificates Notification panel opened /Press the from a microSD card. fingerprint sensor for 1 second or more ❖...
❖ Clear credentials Forcibly delete password : Delete all data including micro SD card password. Clear all authentication information or certificates from the ■ When a password is set to microSD card authentication storage. Password authentication is required when the microSD card is From the Home screen, →[Settings]→...
・ Steps may not be counted accurately in the following cases. Setting my body - When the terminal moves randomly as the bag you put the terminal in hits your legs or hip, or when hanging the terminal down from your hip or bag. Set basic information for fitness applications or widgets, - When shuffling, walking randomly wearing sandals or Voice adjust, Step/Activity counter, etc.
Select operation Slide-in function ・ Captured images are saved in [Screenshots] of Gallery. ・ In case you capture a web page while using the browser, URL information is also obtained. To set Set to activate an application from the displayed launcher (list whether to obtain URL information when sharing, of applications or shortcuts) by sliding your finger from the operate from the image editing screen,...
◆ Registering words From the Home screen, →[Settings]→In PERSONAL, [More...]→[Language & input]→ →[Settings]→In From the Home screen, [Text-to-speech output] PERSONAL, [More...]→[Language & input]→ [Speech rate]→Select a rate [Personal dictionary] →Enter a word→[OK] Date & time ◆ Setting the Android keyboard Set key operation tone of the Android keyboard, auto- Make the settings of date and time.
About phone Display various information of the terminal. →[Settings]→ From the Home screen, [About phone] Check items Software Update : Update software to latest one.→P187 Status : Check battery status, phone number, network name and address, IMEI (individual serial number), etc. Legal information/Technical Regulations Conformity Certification : Check Open source license, the Terms of use of Google or Technical Regulations Conformity...
File management Infrared data port Infrared communication You can send or receive data to or from another terminal or mobile terminal supporting infrared communication. 20 cm ・ Transferable data via infrared communication is as follows. Phonebook , My profile, still pictures, videos, ToruCa, name ❖...
❖ ❖ Sending an entry via infrared Receiving via infrared communication communication <Example> Receiving a phonebook entry ・ For receiving all, set a docomo apps password in advance. <Example> Sending a phonebook entry From the Home screen, →[Settings]→[docomo service] From the Application menu, [docomo →Tap [docomo apps password] to operate for setting.
❖ Radio wave interference with wireless ✔INFORMATION ・ For information on compatible Bluetooth version, profiles, etc., see "Main specifications".→P191 Because a Bluetooth device and wireless LAN (IEEE802.11b/g/ ・ 1Seg sound can be only played back with A2DP compatible n) use the same frequency band (2.4 GHz), if the device is used Bluetooth device that supports SCMS-T content protection near a device with wireless LAN capability, radio wave method.
◆ Connecting with registered Bluetooth ◆ Sending or receiving data to or from devices Bluetooth device Connect Bluetooth device. You can talk or play back sounds or You can send data such as Gallery (→P155) and contacts or music using a Bluetooth device, or exchange data to or from a receive data from a Bluetooth device.
◆ Unpairing from Bluetooth device Time : Set whether to synchronize time with a Time- compatible device. ・ Regardless of the setting, time on the terminal is →[Settings]→ From the Home screen, synchronized with paired Time-compatible device. [Bluetooth] When the setting is on, time on a Time-compatible for a Bluetooth device→[Unpair] device is synchronized with the terminal even if the time on the terminal changes after pairing is complete.
Page 130
Insert a microUSB plug of the USB cable into ◆ Data transfer with the USB mass storage the external connection jack on the terminal and insert a microUSB plug of the USB cable You can exchange data between the terminal and a USB into a USB connector on a PC memory or an external hard disk drive connected with a USB ・...
Browser activates and "dmenu" appears. ・ for dmarket software) and tap [利用開始 (Use)]. Alternatively, by default, from the Home screen, tap ・ For details on dmarket, refer to NTT DOCOMO website. [dmenu]. ✔INFORMATION Play Store ・ To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required.
The terminal may be infected with a virus and Search an application→Select an application the data may be damaged. ・ NTT DOCOMO is not liable for malfunctions, if any, caused by [Install] (for free application)/[Price] (for paid the application you installed. In such case, the repair is application) charged even during the warranty period.
◆ Help of Google Play ◆ Precautions on using Osaifu-Keitai- compatible terminals →[Help] On the Google Play screen, ・ The data (including electronic money, point value, etc.) in the IC card may be lost or modified because of the malfunction of the terminal (When we take your terminal for Osaifu-Keitai repair etc., as we cannot take it with the IC card data remained, you are required to erase the data yourself).
Page 134
◆ Using "Osaifu-Keitai service" ◆ Using "かざしてリンク対応サービス (Kazashite-Link compatible service)" From the Application menu, [Osaifu-Keitai] From the Home screen, →[Settings]→In ・ If the initial setting has not yet made, the initial setting screen appears. Follow the onscreen instructions to set. WIRELESS &...
❖ ❖ Android Beam Transferring content on the screen Transfer data between the terminal and a Reader/Writer, P2P You can transfer content shown on the screen such as equipped terminal. websites and maps, only by holding mark over each ・ To use Android Beam, set to allow data transfer beforehand.
Page 136
◆ Notes when holding the terminal over Using fingerprint authentication : [Use fingerprint authentication]→Authenticate a card reader, NFC module equipped ・ To use fingerprint authentication, make fingerprint device, etc. settings as security unlock preference in advance.→ ・ P110 Be careful not to hit the terminal when holding mark over a compatible device.
Page 137
✔INFORMATION ◆ iDアプリ (iD application) ・ For obtaining, displaying or updating ToruCa, a packet "iD" is a convenient electronic money by credit clearance communication charge may be applied. scheme. You can enjoy shopping simply and conveniently ・ Some ToruCa provided to i-mode terminal may not be only by holding Osaifu-Keitai with credit information set or the obtained/displayed/updated.
■ Broadcast wave and service area Mobacas The radio wave received via Mobacas differs from that received via Xi/FOMA service and 1Seg. For this reason, the signal cannot be received at places where the Mobacas Mobacas is a broadcasting service for smartphones. You can broadcast does not reach or while broadcasting is out of use 2 watching styles: "Real Time"...
Page 139
■ TV antenna ■ Improving reception status ・ When you watch Mobacas or 1Seg, TV antenna receives Fully extend the TV antenna. ・ airwaves. Changing the direction of the TV antenna or moving to other ・ Pull out the TV antenna thoroughly to the end. location may improve signal reception.
Page 140
◆ Watching Mobacas ■ Watching screen ❖ Watching programs/contents From the Application menu, [NOTTV] NOTTV home screen appears. ・ For the first activation, read the terms of service and tap [同意する (Agree)] to automatically make initial settings. ・ Make initial settings under a good communication condition.
Page 141
❖ Searching from program guide (Real ✔INFORMATION time) ・ Programs/contents may not be received in the following case: when the terminal is off while a program/content is On the NOTTV home screen, [番組表 (Program broadcasted, when the battery is low, when the terminal is guide)] out of the Mobacas service area, when a microSD card is not inserted, when a microSD card is low on memory.
Page 142
◆ Setting Mobacas 利用ログ送信 (Send log) : Set whether to send logs of watching broadcasting in real time style, playing/using You can make settings related to the display, sound, receiving broadcasting in storage style, operations on contents. applications, etc. 自動ライセンス取得 (Auto license acquisition) : Set On the NOTTV home screen, [すべて...
Page 143
◆ About signal 1Seg 1Seg is one of the broadcasting services, and the receiving signal (broadcast) differs from that of the Xi/FOMA service. For 1Seg is a terrestrial digital TV broadcasting service for mobile this reason, the signal cannot be received at places where the devices, and can receive data broadcasts with image and broadcast does not reach or while broadcasting is out of voice.
Page 144
❖ ◆ Activating 1Seg 1Seg screen From the Application menu, [TV] 1Seg watching screen appears. ・ When you activate 1Seg for the first time, read the terms of use, tap [同意する (Accept)] and create a channel list corresponding to the watching area.→P146 ✔INFORMATION ・...
Page 145
f Switching channels ◆ Deactivating 1Seg ・ Touch and hold to start channel search. When unregistered broadcasting station is found by the On the 1Seg watching screen, →[終了 channel search, →[チャンネルリスト (Channel list)] (Exit)] →[チャンネル追加 (Add channel)]→[はい (Yes)] to add to the channel list.
Page 146
❖ Deleting TVlink recording)]/[新規視聴予約 (New timer watching)]→[番組表から予約 (Set from On the 1Seg watching screen, →[TVリンク program table)]/[手動で予約 (Set manually)] (TVlink)] Set required items→[完了 (Done)]→[はい (Yes)] Touch and hold a TVlink→[削除 (Delete)]→[はい ✔INFORMATION (Yes)] ・ When the scheduled time arrives, a schedule notification Deleting all TVlinks : →[全件削除...
Page 147
❖ Checking programs set for timer ✔INFORMATION recording ・ Use a microSD card formatted on the terminal in advance. ・ To start recording, 10 MB or more memory space of the Check the result of timer recording. microSD card and 20% or more remaining battery are →[視聴予約...
Page 148
❖ Playing recorded video 主・副音声切替 (Switch Main/sub sound) : Switch between main audio and sub audio in programs broadcast with sub audio. On the 1Seg watching screen, →[録画リス 音声切替 (Switch sound) : Set which sound is to be ト (Recording list)] listened to in programs broadcast with multiple sound.
Page 149
❖ Reset channel list 自動設定 (Automatic setting) : Broadcast stations that can be received in your location are automatically scanned to create the channel list. On the 1Seg watching screen, →[チャンネ ❖ ルリスト (Channel list)]→[チャンネルリスト初 Switching channel lists 期化 (Reset channel list)]→[はい (Yes)] On the 1Seg watching screen, →[チャンネ...
・ Distance that the camera can focus on with auto-focus Camera function is more than approximately 10 cm when Scene mode is set to [Auto]. And for other settings in Scene mode, the preferable distance is approximately 10 cm or more ◆...
j Shooting setting menu icon ◆ Viewing shooting screen k Start recording/End recording button ◆ Still image shooting ・ While using the camera, the camera light blinks as the shooting indicator. From the Application menu, [Still camera]→ Display an object on the shooting screen→ Still image shooting screen Shutter sound is heard and a still image is shot.
Page 152
・ Face the camera toward an object Set [Best-shot Select] to shoot 7 still images including images before and after the shooting operation is made. (Start)/ S After shooting, the terminal recommends the best shot. The recommended best shot is decided according to smile rate, Shooting start sound is heard and a shooting is started.
Page 153
■ Smile shot Store location : Set whether to add location information to shot images (ON/OFF). If the smile of an object person is big enough for the preset Screen brightness up : Set (ON/OFF) whether to make the value, the camera can automatically shoot. screen brighter.
◆ Video shooting ◆ Shooting setting menu for videos ・ While using the camera, the camera light blinks as the Change the settings for shooting using setting menu tab or shooting indicator. shooting setting menu icons displayed on the video shooting screen.
❖ Reading barcode Screen brightness up : Set (ON/OFF) whether to make the screen brighter. ・ If the code is not scanned well, try to change the distance Camera settings : Tap [Restore to defaults] to restore the between the code and camera, the angle or direction of camera settings to be default.
❖ Using barcode data Follow the onscreen instructions and tap an item. Use the scanned barcode data. Select shooting effect etc. from Face mode for headshot ・ Displayed menu options may vary depending on the and from Hand mode for handshot to show shooting scanned data.
■ Palette operation while editing a still image Gallery You can draw image or paste stamps on the Graffiti picture editing screen. ・ Select an item to edit on the pallet screen and draw picture Display/Play saved images (still images or videos) by shooting on the edit screen.
❖ Operation while viewing a still image Media Player ・ Pinch-out/Pinch-in to zoom in/out. ・ While a still image is displayed, tap to operate You can use the Media player to play music/video and music/ [Slideshow]/[Edit]/[Rotate left]/[Rotate right]/[Crop]/[Set video contents downloaded from the store. picture as]/[Details]/[Show on map].
◆ Purchasing from the store YouTube From the Application menu, [Media Player]→ [MUSIC Store]/[VIDEO Store] YouTube is a Google online video streaming service. You can A store screen appears. play, search and upload videos to this service. ・ When you activate for the first time, agree to "dマーケッ From the Application menu, [YouTube] トソフトウェア使用許諾契約書...
・ The displayed map based on the acquired location GPS/Navigation information (latitude and longitude information) may be inaccurate because of the legal system in each country and area. You can use the GPS function on the terminal and a ■ Where radio waves are difficult to receive compatible application to check your current location or search for routes to your destination.
❖ ◆ Enabling the location information Location information and Google search service Permit Google to use your current location information for improvement of search result or quality of services. ❖ GPS function From the Home screen, →[Settings]→ Set whether to permit applications to identify your current [Location services]→Mark [Location &...
❖ ❖ Displaying the current location Searching for a place →Enter a keyword in the From the Application menu, [Maps]→ On the map screen, ・ Search box The following operations are available while the map is displayed. ・ You can enter addresses, city names, business types Scroll : Scroll the map.
❖ Directions ◆ Checking the friend's location by Google Latitude On the map screen, You and your friends can check where you are on the map. [My Location]→Enter the place of departure→ ・ To use Google Latitude, you need to set up a Google account on the terminal.
◆ Local ◆ Managing calendars to be synchronized/displayed You can quickly search for facilities, stores, etc. in the vicinity of your current location. On the calendar screen, →[Calendars to From the Application menu, [Local] display] ・ Registered account names or account calendar names Select a category appear.→P106 ・...
❖ When the notification time is reached AlarmClock Notification is made according to the setting. You can cancel notification or set snooze in the following procedure. You can set Comfortable Alarm which detects your sleep cycle Open the Notification panel to tap notification to sound alarm in a lighter part of your sleep.
→[Settings/Manage/ Setting electronic dictionary : Calculator Info]→[Misc Settings]→Set required items Set font size, number of search results, operations for playback. From the Application menu, [Calculator] Managing dictionaries : →[Settings/Manage/Info]→ [Dictionary Manager]→Perform required operations Calculate Change saving location for dictionary or delete dictionary. Deleting an entered character : Tap a keyword you want to check Switching between function pad and arithmetic...
✔INFORMATION Search ・ When the Home application is set to "NX!Home", you can search with handwritten word while the Home screen is displayed. Settings of handwritten search are as follows. Enter a keyword to search in the terminal or websites, call up →...
Document Viewer SD card backup You can view Office documents (Word, Excel and Transfer or back up phonebook entries, sp-mode mails, PowerPoint), PDF files, or text files. bookmarks, etc. using external memory such as a microSD card. From the Application menu, [Document ・...
◆ Restore ✔INFORMATION ・ Do not remove the battery pack or microSD card from the Restore data of phonebook, sp-mode mail, media files, etc. terminal during backup or restoration. Data may be backed up on a microSD card to the terminal. damaged.
■ Sleep Log Health Diary∼Karada Life∼ Record sleeping status to graphically display sleep time, status of deeply sleeping, roll-over, snoring and display chart of sleeping environment (temperature, humidity). Also, snoring Use applications for supporting your health management by can be recorded/played quantifying amount of daily activity and life habit with Advice for good sleep judging by the result is displayed.
International roaming Available service overseas Main communication 3G850 Outline of international services (GPRS) Phone ○ ○ ○ roaming (WORLD WING) ○ ○ ○ Mail ○ ○ ○ With the international roaming (WORLD WING), you can use Browser ○ ○ ○ the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated * To use data communication during roaming, set Data roaming setting...
Page 172
■ Charging ◆ After arriving overseas Use the FOMA AC Adapter 01 for Global use (optional), FOMA When you arrive overseas and turn the terminal ON, a AC Adapter 02 (optional), or AC Adapter 03 (optional) when connection to the available network is established you charge the battery overseas.
■ Date & time Settings for overseas use When [Automatic date & time]/[Automatic time zone] in [Date & time] is marked, the date, time and time differences of the terminal are corrected by receiving information related to time By default, the terminal is set to automatically search and and time differences from the network of overseas switch to an available network.
◆ Setting a network operator manually Making/Receiving a call in the →[Settings]→In From the Home screen, country you stay WIRELESS & NETWORKS, [More...]→[Mobile networks] →[Network operators] ◆ Making a call to outside country you Available networks are searched for and displayed. stay (including Japan) Select a network of the network operator You can make a call from the country you stay to another...
❖ ◆ Making a call inside the country you Making a call to your terminal stay ■ To have the other party in Japan call you overseas You can make a call to the other party's land-line phone or Have your phone number dialed as a domestic call in Japan. mobile phone in the same way you do in Japan.
Perform required operations ◆ Network service (overseas) Restricting incoming calls : [Restricting incoming calls]→ Set network service such as voice mail from overseas. [Activate restricting]/[Deactivate restricting]/[Confirm ・ Setting the remote operation to be active in advance is settings] required. ・ When [Activate restricting] is selected, tap [Restricting ・...
After returning to Japan When you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations. ・ Set [Network Mode] in [Mobile networks] to [LTE/3G/GSM (Auto)].→P171 ・ Set [Network operators] in [Mobile networks] to [Select automatically].→P172 International roaming...
・ Appendix/Index AC Adapter Converter Plug TypeC 01 ・ Micro USB Cable 01 ・ Touch pen F03 ・ Earphone adapter cable with antenna SH01 ・ DriveNetCradle 01 To connect to the terminal, use FOMA charging microUSB adapter Options and related devices T01.
Page 179
■ Power supply and charging ● The terminal cannot be charged with the wireless charger (the charge information is flashing fast). ● The terminal cannot be turned ON. • Is a dedicated AC adapter used? Is the AC adapter • Is the battery pack installed correctly?→P32 normal? If the situation does not improve even with the •...
Page 180
● No operations are performed even by pressing keys. ● The screen reacts slowly when a touch panel is tapped/ Is the terminal in sleep mode? Press X or the fingerprint key is pressed. sensor to unlock. →P53 When large amount of data is saved in the terminal or transferring large-size data between the terminal and ●...
Page 181
● Terminal operation is unstable. ● Operations are not possible even though the power is • Instability may be caused by application that you turned ON. installed after purchasing the terminal. If the symptom Is the PIN code entry screen displayed?→P108 is improved when you boot the terminal in safe mode ●...
Page 182
• ■ 1Seg/Camera Due to the nature of radio waves, making/receiving calls may be unavailable even when 4 signal status icons ● Cannot watch 1Seg. appear on the display. Move to call again. • Are you out of ground-based digital broadcasting •...
■ Overseas use ● No caller ID is notified/A notified caller ID is different from that of the caller/Functions for using contents ● Cannot use the terminal overseas even when signal saved in Phonebook or those using Caller ID notification status icon is displayed.
Page 184
● Calls cannot be made from the terminal connected to an ● Display flickers. external device such as car navigation or handsfree If [Automatic brightness] of the screen brightness setting device. is marked, display backlight automatically changes If calls are made several times when the other party does according to the ambient brightness.
● No sound comes out. ● Cannot operate If the stereo earphone plug is removed from the earphone This message appears when PUK code is entered with jack while watching 1Seg or playing contents in Media docomo mini UIM card is PUK locked. Contact a sales Player, playing is paused or muted.
When Security unlock preference is set, authentication ・ For details of Smartphone Anshin Remote Support, refer to is required. NTT DOCOMO's website. [Erase everything] Call スマートフォン遠隔サポートセンター A short while after the reset is completed, the terminal will (Smartphone Remote Support center) be restarted.
❖ After Sales Services Warranty and After-Sales ■ When problems occur Service Before requesting repair, read the section on "Troubleshooting" in this manual (→P176). If the problem still ❖ Warranty persists, contact "Repairs" on the last page of this manual (in Japanese only).
Page 188
・ ■ Repairs may not be possible in the following cases. Repair of failures or damage caused by modification is charged even during the warranty period. ・ When corrosion due to moisture, condensation, ・ Do not remove an inscription sticker attached to the perspiration, etc.
DOCOMO shall have no Check the NTT DOCOMO website to see if software updates liability for any change or loss of any kind. Under some are necessary.
Page 190
・ ◆ When updating software During international roaming or when the terminal is out of service area, [When docomo network is not available, or ・ Do not remove the battery pack while updating software. during roaming software update is not available even if Wi- The update may fail.
❖ ◆ Updating software automatically When software update is necessary Update file is automatically downloaded and software is If the update file is downloaded automatically, (software updated at the specified time. update available) appears on the status bar to notify. ・...
Page 192
Rewriting starts automatically approximately ✔INFORMATION 10 seconds after [Ready for update. Please ・ If the software is not updated when the update notification is refrain from starting other application.] is received, (software update available) appears on the status bar to notify. displayed ・...
❖ When the reserved time is reached Main specifications When the preset time is reached, rewriting starts automatically approximately 10 seconds after [Ready for update. Please refrain from starting other application.] is displayed. ■Phone ✔INFORMATION Product name F-03E × ・ While updating the software, all key operations become Size Approx.
Page 194
Display Type Bluetooth Version Size Approx. 4.0 inches Output Power class 1 Number of 16,777,216 colors Available Within approx. 10 m colors communication × distance Number of dots 540 (H) 960 (V) dots (qHD) Supported HFP, HSP, DUN, OPP, SPP, Image Type Out-camera : CMOS...
❖ Numbers of still images (Estimation) It is confirmed that the terminal and all Bluetooth devices are compliant with Bluetooth standards designated by Bluetooth SIG, and they are authenticated. However, procedures may differ or data Body microSD card Image size transfer may not be possible depending on the device's (1GB) ×...
This mobile phone satisfies the international guidelines when used with a carrying case or a wearable of Mobile Phones accessory approved by NTT DOCOMO, INC.( ) In case you are not using the approved accessory, please use a product that...
Regarding the method of measuring SAR when using mobile The SAR limit for mobile phones used by the public is 2.0 phones in positions other than against the ear, international watts/kilogram (W/Kg) averaged over ten grams of tissue, recommended by The Council of the European Union. standards (IEC62209-2) were set in March of 2010.
◆ FCC RF Exposure Information Before a phone model is available for sale to the public, it must be tested and certified to prove to the FCC that it does not This model phone meets the U.S. Government's requirements exceed the limit established by the U.S. government-adopted for exposure to radio waves.
These limits are designed to provide reasonable protection These requests are designed to prevent possible interference against harmful interference in a residential installation. This with sensitive medical equipment. equipment generates, uses and can radiate radio frequency PETROL STATIONS energy and, if not installed and used in accordance with the Obey all posted signs with respect to the use of wireless instructions, may cause harmful interference to radio devices or other radio equipment in locations with flammable...
Exchange and Foreign Trade Control Laws" and the related mode" and logo of "iD" are trademarks or registered laws and regulations). And, they are also under coverage of trademarks of NTT DOCOMO. Export Administration Regulations of the U.S. When ・...
Page 201
Bluetooth SIG, INC. and any use of such marks ・ Twitter and Twitter logo are trademarks or registered by NTT DOCOMO, INC. is under license. Other trademarks trademarks of Twitter, Inc. and names are those of their respective owners.
Page 202
® ® ® ・ Wi-Fi , Wi-Fi Alliance , WMM and logos of - Recording moving pictures and i-motion that conform to Wi-Fi and Wi-Fi CERTIFIED are registered MPEG-4 Visual Standard (hereinafter referred to as MPEG- trademarks of Wi-Fi Alliance. 4 Video) ・...
Page 203
・ By default, the following dictionary data is installed in the <Shogakukan> 家庭医学館(総編集 柳下徳雄/服部光男/岡島重孝/小学 built-in storage. You can download the right version of [簡易 版 (Simplified)] contents by accessing the download site 館・家庭医学館編集委員会) from the terminal or the download site for a PC from your <Kadokawa Gakugei Shuppan>...
This terminal supports SIM unlock. If you release SIM lock, ・ This product contains software complying with GNU you can use SIM by a carrier other than NTT DOCOMO. General Public License (GPL), GNU Lesser General Public ・ The SIM unlock service is provided at a docomo Shop.
Index Index Barcode reader ..............Battery Charging ................ Charging time..............Checking ..............Operation time .............. About phone..............Battery icon ..............Access point ..............Best view adjust.............. Accessibility..............Best-fit zoom ..............Account Bluetooth communication ..........Manual synchronization..........Bookmarks................. Accounts ................. Brightness................Adding .................
Page 207
Downloading..............Indicator LED ..............Manner mode ..............Infrared communication ..........Media Player..............Initial settings..............Memory space..............Installing/Removing microSD card ......... MIC input ................Intelligent color adjust........... microSD card..............International call ............Erasing data..............International call (WORLD CALL)........Format................169, 173 International roaming..........
Page 208
NX! eco ................Photo Screen ..............Picture correction............PIN code................Play Store ................ Office documents ............Playing video ..............Omakase touch .............. Privacy mode..............Optional and related devices ........Activating/Deactivating..........Osaifu-Keitai ..............Setting................Osaifu-Keitai Lock Setting..........Privacy view ..............Packet connection............. Recent calls................
Page 209
Sleep mode................ Slide-in function ............. Vibrate and ring ..............Smartphone Anshin Remote Support ......Vibrate when touch ............SMS ..................Video camera shooting screen ........Software update ............Video correction.............. Sound and Vibration............Video shooting..............sp-mode ................View still image .............. sp-mode mail..............
Using mobile phone with your manners! Please ask checking/changing subscription detail, application of various services and request of various information materials online. Always turn OFF your terminal in cases below From sp-mode dmenu⇒"お客様サポー トへ (To ■ In a place where use of mobile phone is prohibited Customer support)"⇒"各種お申込...
Page 211
Match the volume of voice and ring alert to your location Functions designed for public use ■ In a quiet place like a restaurant or hotel lobby, pay Your terminal has a number of useful functions designed for public use, such as a setting that instructs your terminal not attention to the volume of your voice etc.
Page 212
Loss or theft of terminal or payment of cumulative cost overseas Failures encountered overseas <docomo Information Center> <Network Support and Operation Center> (available 24 hours a day) (available 24 hours a day) ● From DOCOMO mobile phones ● From DOCOMO mobile phones International call access code International call access code -81-3-6832-6600...
Page 213
Please confirm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website. NTT DOCOMO website http://www.nttdocomo.co.jp/english/ Don't forget your mobile phone ・・・ or your manners! When using your mobile phone in a public place, don't forget to show common courtesy and consideration for others around you.
Need help?
Do you have a question about the Arrows Kiss F-03E and is the answer not in the manual?
Questions and answers