Receiving A Videophone Call - NTT docomo FOMA N702iS Manual

Receiving a Videophone Call

Use this procedure to accept an incoming videophone call. If you cannot answer the call with camera image
immediately, you can still receive the call with a substitute image instead of your camera image.
When a videophone call comes in, press o(
1
The "Videophone in-call screen" (P.85) appears.
You will hear the other party's voice from the speaker and you can start talking.
"Using the hands-free operation" → P.94
■ To answer using the substitute image
d(Subst.)
The substitute image appears on the caller's display.
After sending the substitute image, you can switch to the camera image by selecting
"Camera image" from the function menu.
■ When using an earphone/microphone with switch (optional)
Press the switch on the earphone/microphone with switch
You can answer using the camera image. If "Automatic answer" is set to "ON", the FOMA
terminal automatically answers the call using the substitute image once the specified ringing time has elapsed.
■ To put a videophone call on hold while the FOMA terminal is ringing
y
The "On hold" image and message appear on the caller's videophone display. To answer the held call using the
camera image, press o(
■ To send video from the rear camera during a videophone call
d(Change)
Each time you press d(Change), the video switches between the front and rear cameras (Change camera) dur-
ing a videophone call.
■ To switch between camera image and substitute image during a videophone call
p(FUNC)
■ To put the current videophone call on hold
t
The other party hears the hold tone and the "Holding" image appears on his or her videophone display.
To answer the held videophone call, press o (
(Subst.) to use the substitute image.
To end the call, press y
2
N
Digital communication charges are still applied to the caller when the substitute image is displayed during a videophone call.
Even if "Call forwarding" is set to "Activate", a received videophone call can only be forwarded if the designated number is a 3G-324M-
compatible (P.84) videophone terminal. Check if a terminal to which a call will be forwarded supports 3G-324M before setting.
If you receive a videophone call from a caller who is barred in the Nuisance call barring service, the call ends after showing the call
rejection video message.
You cannot receive i-mode mail or a Message R/F during a videophone call. Received mail is kept at the i-mode Center and can be
retrieved using "Check new message" once the videophone ends.
You can receive SMS during a videophone call.
When you receive another videophone call during a videophone call, you can answer the call after ending the current call if you have
subscribed to "Call waiting", "Voice mail service" or "Call forwarding" service.
If the low-voltage alarm "Recharge battery" appears on the display during a videophone call, the other party sees the "Camera Off"
message and the call is disconnected about 20 seconds later. If you start charging the battery before the call is terminated, the
videophone call continues with the image that was displayed before the low-voltage alarm.
The FOMA terminal does not ring and the incoming call lamp does not flash when "Public mode (Driving mode)" is set. Received calls
are logged in the Received calls record as missed calls.
Depending on the settings used by the caller, you may receive a substitute image instead of video images.
When switching from the camera image to the substitute image (Chara-den), it may take a few seconds depending on the Chara-den.
) or r. To answer using the substitute image, press d(Subst.).
"Substitute image" or "Camera image"
) or r
) or r to use the camera image and press t or d
［Ｖ−ｐｈｏｎｅ ｃａｌｌ］
Ｓｕｂｓｔ． ＦＵＮＣ
Videophone in-call
Function menu P.86
89