NTT docomo FOMA SO902iWP+ User Manual

Table of Contents

Quick Links

Download this manual

Easy Search/Contents/

Safety Precautions

Before Using the

FOMA Terminal

Receiving Calls

Placing/Receiving

Videophone Calls

Phonebook

Sound/Display/

Light Settings

Security Settings

Osaifu-Keitai/

Displaying/Editing/

Managing Data

Other Useful Functions

Network Services

Data Communication

Entering Text

Appendix/External Device Interface/

Troubleshooting

Quick Manual

Placing/

PushTalk

Camera

i-mode/

i-motion

Mail

i-αppli

i-Channel

ToruCa

Index/

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA SO902iWP+ and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo FOMA SO902iWP+

Page 1 Easy Search/Contents/ Safety Precautions Before Using the FOMA Terminal Placing/ Receiving Calls Placing/Receiving Videophone Calls PushTalk Phonebook Sound/Display/ Light Settings Security Settings Camera i-mode/ i-motion Mail i-αppli i-Channel Osaifu-Keitai/ ToruCa Displaying/Editing/ Managing Data Other Useful Functions Network Services Data Communication Entering Text Appendix/External Device Interface/ Troubleshooting...
Page 2 4. Learn the meaning of the information on the display, such as icons (P.30). 5. Learn how to operate the menus (P.33). 6. Learn how to place/receive a call (P.48, 58). The latest information on this manual is ready for download at the NTT DoCoMo’s website. • “User’s Manual Download” (http://www.nttdocomo.co.jp/english/support/manual/index.html)
Page 3 Information on Using the Manual and How to Look up in the Manual This manual guides you through the operating instructions with step-by-step screen examples for each operating procedure to ensure that you operate the FOMA terminal properly. ■How To Look up in the Manual This manual employs several search methods so that it can provide the most appropriate way to find a page relating to your desired function or service flexibly according to your need or situation.
Page 4: Before Using
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.338) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. Save additional service (USSD) ...
Page 5 ■Typical layout of the operating instructions page Showing Your Phone Number on the Recipient’s Phone Section title When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives Chapter title phone you are calling. •...
Page 6: Search A Function That You Want To Know Or You Consider Useful To Know From A Listing Sorted By
Easy Search You can search a function that you want to know or you consider useful to know from a listing sorted by purpose or by a function name. Useful Functions for a Call your phone number Sending or keeping it anonymous ... P.44 (Notify caller ID) hands-free Talking on the mobile phone ......
Page 7: Contents (P
Useful Functions for Mail Deco-mail ............P.195 (Compose and send Deco-mail) Sending image Sending an ............P.199 (File attachment) up to five persons at a time Broadcasting mail ( ) ..P.217 (Mail list) Sorting automatically received mail ......P.214 (Sort inbox) signature Adding a to mail messages ......
Page 8: Table Of Contents
Before using the FOMA terminal To the first-time users of the FOMA terminal Information on Using the Manual and How to Look up in the Manual ..1 Easy Search ................4 Contents Features of the FOMA SO902iWP＋ ........8 Making Full Use of SO902iWP＋! ........
Page 9 i-mode/i-motion What is i-mode?, Display sites, Change i-mode password, Internet connection, Bookmark, Screen Memo, Save image, Download, i-mode setting, MessageR/MessageF, SSL certificate, User certificate, What is i-motion?, Download i-motion, and so on... Mail What is i-mode mail?, Compose and send mail, Compose and send Deco-mail, File attachment, Save mail, Check new messages, Play/save attached file, Mail setting, Compose and send SMS, and so on...
Page 10: Features Of The Foma So902Iwp
Features of the FOMA SO902iWP＋ “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communications systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11 Videophone Smart Layer Menu You can talk face-to-face with a person you are You can easily display the menus and switch calling. You can switch to the Out-camera so that functions during multitasking by pressing . The you can show the scenery around you to the FOMA terminal uses the Floating Design that person you are talking with, or use the Chara-den allows a menu to appear over the currently...
Page 12: Making Full Use Of So902Iwp
Making Full Use of SO902iWP＋! PushTalk Recipient Recipient You can communicate among several persons Recipient (up to five persons including yourself) with a simple operation of pressing for over a second to invoke the PushTalk phonebook, Caller Recipient selecting recipients, and pressing (P.80).
Page 13 i-Channel You can automatically receive a variety of information on a regular basis. You can also display a list of available channels by pressing . i-Channel provides you with information that is rich and detailed (P.234). Unsubscribed Subscribed → 最高２８℃ １０Ｍａｉｌｉ−ｍｏｄｅ...
Page 14: Safety Precautions (Observe Strictly)
Safety Precautions (Observe Strictly) For safe and proper use of the FOMA terminal, please read the “Safety Precautions” prior to use. Keep the Manual in a safe place for future reference. ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage.
Page 15 Handling the FOMA Terminal, Battery Pack, Adapter (including the charger), and UIM DANGER Do not get the FOMA terminal, battery Do not use or leave the FOMA pack, or adapter wet. terminal, battery pack, adapter, or UIM in a place subject to high temperature If liquids such as water or pet urine Don’t liquids...
Page 16 CAUTION Do not place on an unstable or inclined Keep the FOMA terminal, battery platform. pack, adapter, and UIM out of the reach of babies and infants. Doing so may cause the device to fall Don’t and cause injury or malfunction. Failure to do so may cause accidental swallowing or injury.
Page 17 WARNING Power off the FOMA terminal in a If you hear thunder while using the place where the use is prohibited such FOMA terminal outdoors, power off as in airplane or hospital. immediately and take shelter in a safe place. The FOMA ter minal may affect electronic equipment and electronic Failure to do so may cause injury or...
Page 18 CAUTION Do not place a magnetic card, etc. Do not allow a foreign substance such near the FOMA terminal. as water and other liquids, metal parts, or flammables to get in the UIM Don’t Don’t Magnetic data on bankcards, credit insertion slot on the FOMA terminal.
Page 19 WARNING Stop charging if the FOMA terminal is If the battery pack leaks or hears an not charged within the specified unusual odor, immediately stop using charging time. and move it away from fire. Failure to do so may cause the battery The leaking liquid may ignite fire, pack to leak, overheat, explode, or catch fire, or explode.
Page 20 WARNING Use the adapter only on the specified Clean dust from the plug. power supply and voltage. Failure to do so may cause fire. Failure to do so may cause fire or malfunction. Always use the FOMA When you connect the AC adapter to AC Adapter 01 for both domestic and the power outlet, make sure that it overseas use, especially when you...
Page 21 Handling the UIM CAUTION Please be careful when you remove the UIM (IC portion). Failure to do so may damage your hand or fingers. Handling the FOMA Terminal Near Electronic Medical Equipment ■The following instructions observe the guidelines of the Electromagnetic Compatibility Conference, Japan to protect electronic medical equipment from radio waves from mobile phones.
Page 22: Handling Precautions
Handling Precautions ◆ Common Precautions ●Do not expose to water. • The FOMA terminal has a waterproof performance compliant with IPX7 (equivalent to JIS waterproof specification grade 7), provided that the rear cover is attached to it and locked properly. However, the FOMA terminal is not totally waterproof, so in the rain or when water droplets are still on the FOMA terminal, do not attach/remove the battery pack or open/close the cover of the external connection terminal or earphone mic jack or the rear cover.
Page 23 ◆ Battery Pack Precautions ●The battery pack is a consumable accessory. • The operating time of the FOMA terminal varies depending on the operating conditions and other factor even if it is fully charged. When the length of time you can use the phone (operating time) on a charged battery becomes unusually short, it is time to replace the battery pack.
Page 24: Waterproof Feature
Waterproof Feature The FOMA terminal features a waterproof performance compliant with IPX7 (equivalent to JIS waterproof specification grade 7), provided that the rear cover is attached and locked properly. ◆ IPX7 (equivalent to JIS waterproof specification grade 7) Being IPX7 compliant means that the FOMA terminal should maintain functionality as a mobile phone after submersion in 1 m depth of static water for up to 30 minutes, provided that tap water of normal temperature is used.
Page 25 ◆ Precautions • Make sure to close the covers of the external connection terminal and earphone mic jack and the rear cover tightly. If any tiny foreign substance (such as a hair and a grain of sand) enters between the cover and mating surface, it may cause water leaks.
Page 26: Intellectual Property Right
“QUICKCAST”, “Osaifu-Keitai”, “DCMX”, “Public mode”, “Security Scan”, “sigmarion”, “musea”, “V-Live”, “visualnet”, “FOMA” logo, “i-mode” logo, “i-αppli” logo, and “DCMX” logo are trademarks or registered trademarks of NTT DoCoMo. • The Call Waiting Service is a registered trademark of Nippon Telegraph and Telephone Corporation.
Page 27 • ImageStar is a registered trademark of Ainix Corporation. • This product incorporates NetFront of ACCESS CO., LTD to perform Internet functions. NetFront is a trademark or registered trademark of ACCESS CO., LTD in Japan and other countries. Copyright © 1996-2006 ACCESS CO., LTD. •...
Page 28: Supplied And Optional Accessories
Supplied and Optional Accessories ■Supplied accessories FOMA SO902iWP＋ User Guide (this manual) FOMA SO902iWP＋ CD-ROM (w/warranty and Rear Cover SO03) (w/Quick Manual P.348) (“Manual for Data Communication” (PDF format) is included) Rear Cover Opener Active Holder SO01 (w/user’s manual) ■Optional accessories FOMA AC Adapter 01 Desktop Holder SO03 Battery Pack SO01...
Page 29: List Of Menus (P
Before Using the FOMA Terminal Part Names and Functions ....................28 Using the Display ........................30 Selecting the Menu ....................... 33 Using the UIM ........................35 Attaching and Removing the Battery Pack ................37 Charging the FOMA Terminal ....................39 Checking the Battery Level ................
Page 30: Part Names And Functions
Part Names and Functions wj wk e; ea Connecting the Flat-Plug Switched Earphone Mic (optional) FOMA SO902iWP＋ 1 Incoming Indicator Flashes when receiving a call/mail. It flashes when there is a missed call or new mail/unread message (P.103, 113). Dimensions (mm) : 114 × 49 × 21 (H × W × D) 2 FeliCa Sign Weight (g) : About 120 (with battery pack...
Page 31 3 Earpiece wa FeliCa Mark The caller’s voice is heard from here. Indication for a built-in IC card. Hold this mark to the reading device (reader/writer) to 4 Display (P.30) use the Osaifu-Keitai. You cannot remove the IC card 5 Four-way Keys and Enter Key (P.30) (P.239).
Page 32: Using The Display
Four-way Keys and Enter Key Symbols in Operation Description this manual Enter key Set a selected item. Up arrow Move the cursor upward. Press for over a Left Right second to move the cursor continuously. arrow arrow arrow Press in the stand-by display to display the Data box.
Page 33 Current time (24-hour format) Radio wave condition The vibrator is set for incoming calls (P.103) During i-mode (P.159) The vibrator is set for incoming mail (P.103) During i-mode communications The vibrator is set for incoming calls and mail During packet communications (P.286) (P.103) While sending/receiving packet communication Incoming call ring volume OFF (P.102)
Page 34 Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information.
Page 35: Selecting The Menu
Selecting the Menu The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple mode] as well as change menu icons to be displayed in the Normal mode (P.113). For the list of menus in the Normal mode, see P.296.
Page 36 Selecting a Function from the Menu Display A function can be executed easily by going through the menus. Press (MENU). The menu display appears. Press to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad.
Page 37: Using The Uim
Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in a FOMA-compatible terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power off the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.
Page 38: Service Numbers
About the Function for Restricting UIM Operation The FOMA terminal provides a function for restricting UIM (FOMA card) operation in order to protect your data and files. If you record a videophone message or download files or data from sites or mail while the UIM is inserted in the FOMA terminal, the UIM operation restriction function is automatically set for these data and files.
Page 39: Attaching And Removing The Battery Pack
WORLD WING WORLD WING is the DoCoMo’s FOMA international roaming service that enables you to place or receive a call using the same mobile phone number even when you are overseas, just by replacing the UIM (green) with a card for a WORLD WING service-compatible FOMA terminal or overseas-use mobile phone (W-CDMA or GSM system).
Page 40: Battery Pack
(The average life of a battery pack is about one year. However, depending on the frequency of use, the life may become shorter.) Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
Page 41: Charging The Foma Terminal
Charging the FOMA Terminal At the time of purchase, the battery pack is not fully charged. Make sure to fully charge the battery pack before using the FOMA terminal for the first time. About Charging the FOMA Terminal • Be sure to attach the battery pack in the FOMA terminal before connecting it to the optional AC Adapter, Desktop Holder, or DC Adapter.
Page 42 How to Charge the FOMA Terminal Below is the procedure to charge the battery pack using the optional Desktop Holder SO03 with the FOMA AC Adapter 01 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter. The battery pack cannot be charged alone.
Page 43: Checking The Battery Level
Checking the Battery Level The estimated battery level is indicated in the display. • Use this level only as estimated. Display Charge level Sufficiently charged. Slightly low. Very low. Charge. (Flashes) The battery level is 0. Charge. ● When the battery level becomes 0, the screen shown to the right appears and warning sound is heard.
Page 44: Attaching And Removing The Active Holder
Attaching and Removing the Active Holder • For more information on the Active Holder, see the user’s manual of the supplied Active Holder SO01. ■Attaching the Active Holder Upper part of the holder Unhook the buttons on the Active Holder. Insert the top of the FOMA terminal into the upper part of the holder in the correct orientation.
Page 45: Powering On/Off
Powering On/Off • The screen for confirming whether to execute the SW Update may appear when you power on the FOMA terminal (P.329). Press for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and the Wake-up image (animation) is displayed.
Page 46: Setting The Date/Time And Time
Setting the Date and Time Set the date and time of the FOMA terminal. From the Menu, select [Settings] → [Management] → [Date/time] and press Ｄａｔｅ／ｔｉｍｅＤａｔｅ −−−−／−−／−− −−− Ｔｉｍｅ −−：−− Enter the year, date, and time. Enter the year and date within the range from 2000/01/01 to 2050/12/31. Enter the time in 24-hour format (00:00 to 23:59).
Page 47: Checking Your Own Phone Number
Checking Your Own Phone Number Your phone number can be checked. You can also save your name, mail address, etc. • If the Own number is saved as Secret, the data other than your phone number, mail address, and Additional No. is not displayed.
Page 48 Enter your home postal address at [ Enter an address within 64 full-width or 128 half-width characters. Enter your home phone number at [ Enter a number within 26 digits. Enter your home mail address at [ Enter a mail address within 50 half-width alphanumeric characters. Enter your office name at [ Enter a name within 64 full-width or 128 half-width characters.
Page 49 Placing/Receiving Calls ■Placing Calls Placing a Call ........................48 Switching from Voice Call to Videophone Call ........<Chg. to videophone> Redialing Previously Dialed Numbers ............<Redial record> Changing the Caller ID Setting ON/OFF for an Individual Call ......<186/184> Placing a Call by Specifying a Condition ................53 Setting a Prefix ....................
Page 50: Placing A Call
Placing a Call Check the radio wave condition and enter a phone number. • Do not cover the antenna with your hands for a call in better radio wave condition. Enter a phone number in the stand-by display. • You can enter a phone number of up to 80 digits. •...
Page 51 ● You may not be able to place the call if you enter other than a phone number after “+” or enter only “+”. ＊The paging service provided by NTT DoCoMo is called QUICKCAST as of January 2001.
Page 52 Switching from Voice Call to Videophone Call A caller can switch to videophone call during a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.78). Press (Func) during a voice call, select [Chg.
Page 53 Redialing Previously Dialed Numbers Up to 30 previously dialed calls are saved in the Redial record with their dates/times, phone numbers, and names. The redial records can also be listed in the order of phone numbers you most frequently dial (Dial frequency record). Press ) in the stand-by display.
Page 54 Deleting the Redial Record The Redial and Dial frequency records are retained even if the FOMA terminal is powered off. If you do not wish others to know the previously dialed records, delete one or all of the redial/dial frequency records. •...
Page 55 Placing a Call by Specifying a Condition When you place a call, you can select a call type and call condition from the Call menu, for example, whether to notify a recipient of your phone number. Example: Placing a voice call Enter a phone number in the stand-by display and press (Call).
Page 56 • If you have an overseas specific 3G mobile phone, you can connect to an international videophone by selecting videophone after the above dialing method. ※ See the NTT DoCoMo website for information about countries to which a videophone call can be connected and telecommunication companies.
Page 57 Setting a Number Other Than WORLD CALL You can save up to three prefixes or country codes to be added at the beginning of a phone number in order to place an international call. You can also automatically add the number by entering “+”...
Page 58 Select an input field and press Ｃｏｕｎｔｒｙｃｏｄｅ１ＣｏｕｎｔｒｙＮａｍｅ日本Ｃｏｕｎｔｒｙｃｏｄｅ＋８１ Enter a country name in the country name field and a country code in the country code field. Enter a country name within eight full-width characters or 17 half-width characters and a country code within 26 digits.
Page 59 Setting the Alarm When Reconnecting a Dropped Call This function automatically reconnects the call interrupted during a voice, videophone, or PushTalk call due to the radio wave condition, such as in a tunnel or between buildings, right after the radio wave condition is recovered. You can set an alarm tone when a call is reconnected.
Page 60: Voice Mail Service
Receiving a Call When you receive a call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When receiving a call, press A phone number appears in the display when a caller sends it.
Page 61 Receiving a Call by Switching from Voice Call to Videophone When a caller switches from a voice call to a videophone call, a recipient can select the image to be sent. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.78).
Page 62 Using the Received Record Up to 30 previously received calls are saved in the Received record with their dates/times, phone numbers, and names. A ring time for a missed call can be checked. Press ) in the stand-by display. The phone numbers or names appear in descending order from the most ＲｅｃｅｉｖｅｄＦｒｅ...
Page 63 ● When a caller uses a “Dial-in” phone number, the phone number displayed may be different from the caller’s dial-in number. ● If the caller switches the call between voice and videophone during a call, the call you received first is saved in the Received record.
Page 64: Putting A Call On Hold
Putting a Call on Hold If you cannot answer a voice or videophone call immediately, you can put the call on hold. • Even if the answer is put on hold, the caller is charged for the calling charge. Example: Putting a voice call on hold When receiving a call, press The beeps sound and the answer is put on hold.
Page 65 ■When the Public mode (Driving mode) is set • Even if there is an incoming call, the ring tone does not sound and you cannot answer it. The notification icon of missed call appears and the call is saved in the Received record. The guidance for the Public mode is played back to inform the caller that you are unable to answer the call because you are driving or in a place where talking on a mobile phone should be avoided (trains, buses, or movie theaters), and then the call is disconnected.
Page 66 Using the Public Mode (Power off) The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places. When the Public mode (Power off) is set, the guidance is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone (such as in hospitals, airplanes, and near priority seats in trains), provided that there is an incoming call when the FOMA terminal is powered off, and then the call is disconnected.
Page 67 Checking the Missed Calls When you are unable to answer an incoming call or receive new mail, the notification icon (P.32) appears in the stand-by display. If a voice, videophone, or PushTalk call or 64K data communications is not answered, “ ” appears in the stand-by display.
Page 68 When Receiving a Call The answering message is played back to the caller after the ring tone Ｐｌａｙａｎｓｗｅｒｍｅｓｓａｇｅドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 69 Setting the Operation of the Record Message Press in the stand-by display, select [Set rec msg], and press ＳｅｔｒｅｃｏｒｄｍｅｓｓａｇｅＳｅｔＯＦＦＴｏａｎｓｗｅｒ００８ｓｅｃ（０００−１２０）Ａｎｓｗｅｒｉｍｇ（Ｖ．ｐｈｏｎｅ）テレヒ゛電話動作中Ｒｅｃｏｒｄｉｍｇ（Ｖ．ｐｈｏｎｅ）テレヒ゛電話動作中 Enter the time before starting the answering message at [To answer]. Enter from 000 to 120 seconds. Select an image to be sent when answering a call from My picture of the Data box at [Answer img(V.phone)].
Page 70 Playing Back/Deleting a Record Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.272). Playing Back a Record Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Ｐｌａｙｒｅｃｏｒｄｍｅｓｓａｇｅ...
Page 71 Placing/Receiving Videophone Calls What is Videophone? ......................70 Placing a Videophone Call ....................71 Receiving a Videophone Call ....................74 Using Chara-den ........................75 Setting the Videophone Operation ............<Videophone setting> Setting Notice for Switching between Voice and Videophone Calls .. <Videophone switch notice>...
Page 72: What Is Videophone
What is Videophone? You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own. ※2 ※1 DoCoMo’s videophone complies with the 3G-324M...
Page 73: Placing A Videophone Call
Operations during a Videophone Call Operation Key operation Switch between camera image/substitute Press (MySide/Sub). Every time you press the key, the display is image switched between camera image/substitute image. Switch cameras Press (In/Out). Every time you press the key, the camera is switched between the In-/Out-camera.
Page 74 ● If you enter a phone number, press (Call), and select [Videophone] from the Call menu, you can place a videophone call by specifying an image to be sent and communication speed. ● You may not be able to place a videophone call while another function is being executed. ●...
Page 75 Switching from Videophone Call to Voice Call A videophone caller can switch to voice call during a videophone call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.78). Press (Func) during a videophone call, select [Chg.
Page 76: Receiving A Videophone Call
Receiving a Videophone Call When you receive a videophone call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When you receive a videophone call, press (V.phone).
Page 77: Using Chara-Den
Receiving a Call after Switching from Videophone Call to Voice Call When a videophone caller switches from a videophone call to voice call, the recipient’s phone automatically switches to a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.78).
Page 78: Setting The Videophone Operation
Setting the Videophone Operation Setting the Display to Be Used in a Videophone Call You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 79 Setting the Videophone Image Quality You can set the quality of an image to be sent to the recipient. From the Menu, select [Settings] → [Call] → [Videophone] → [Visual preference] and press [Prefer img qual] : Send an image with priority on image quality. [Normal] : Send an image by keeping a balance between image quality and movement.
Page 80: Setting Notice For Switching Between Voice And Videophone Calls
Setting Notice for Switching between Voice and Videophone Calls You can set whether to notify the recipient/caller that the FOMA terminal is capable of switching between voice and videophone calls. • You cannot perform this setting when you are outside of the service area or in a place where radio waves do not reach, or during a voice or videophone call.
Page 81 PushTalk What is PushTalk? ........................ 80 Originating a PushTalk Call ....................82 Receiving a PushTalk Call ....................83 Saving Data in the PushTalk Phonebook ................83 Originating a PushTalk Call Using the PushTalk Phonebook ..........85 Deleting a PushTalk Phonebook Entry ................. 86 Using the PushTalk Phonebook ..............
Page 82: What Is Pushtalk
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing for over a second to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press and speak, you are charged for PushTalk communications.
Page 83 Using the Display during PushTalk Communications : During PushTalk communications : Hands-free ON 3 Active speaker ＯｎＰｕｓｈＴａｌｋ The phone number/name (when the speaker is saved in the Phonebook) appears ドコモ一郎 [Myself] : You are currently the active speaker (you ○○○同好会 can speak) [User unset] : The Caller ID of the caller is set to [OFF]...
Page 84: Originating A Pushtalk Call
Originating a PushTalk Call • You cannot originate a PushTalk call during a voice call, a videophone call, or data communications. • If you originate a PushTalk call during i-mode communications, the i-mode communications is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. Enter a phone number in the stand-by display.
Page 85: Receiving A Pushtalk Call
Receiving a PushTalk Call When you receive a PushTalk call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming PushTalk call varies depending on the settings of the Incoming set, Manner mode, etc. • If you receive a PushTalk call during a voice call, the PushTalk call is not connected. The notification icon of missed call appears and the call is saved in the Received record.
Page 86 Select [View phonebook] and press The FOMA terminal phonebook appears. Select an entry → a phone number and press The phone number is saved in the PushTalk phonebook and “ ” appears ＳｅｌｅｃｔＰｕｓｈＴａｌｋＮｏ．０９０ＸＸＸＸＸＸＸＸ in the entry in the FOMA terminal phonebook. ０３ＸＸＸＸＸＸＸＸ...
Page 87: Originating A Pushtalk Call Using The Pushtalk Phonebook
Select [Member list] and press Ｓｅｌｅｃｔｍｅｍｂｅｒ４／１９ To cancel all selections 携帯あき子 Press (Rel all). 携帯なつ子携帯はる子ドコモ一郎ドコモ二郎 Select a member, press , and then press (Complete). “ ” appears for the selected member. Press (Complete). The group is saved in the PushTalk phonebook. Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons.
Page 88: Deleting A Pushtalk Phonebook Entry
Originating a PushTalk Call from the Group Press for over a second in the stand-by display and press To display group numbers ＭｅｍｂｅｒＧｒｏｕｐ ○○○同好会 When saved, group icons are displayed instead of group numbers. Press △△△クラブ to switch the display temporarily between group icons and group ○△○愛好会...
Page 89: Using The Pushtalk Phonebook
Select a member and press (Func). The Function menu appears. Select [Delete] → [Delete one] → [Yes] and press The screen for confirming whether to delete the corresponding entry from the FOMA terminal phonebook appears. Select [Yes]/[No] and press The selected member is deleted. Using the PushTalk Phonebook You can connect to the network and use the PushTalkPlus service (P.80).
Page 90 Setting the Ring Time If you select [OFF] for the Auto answer setting, set the ring time of the PushTalk call. From the Menu, select [Settings] → [Application] → [PushTalk] → [Set ring time] and press Enter the ring time within 01 to 60 seconds. Enter the PushTalk ring time.
Page 91 Phonebook Phonebooks the FOMA Terminal Can Use ................90 Saving an Entry in the FOMA Terminal Phonebook ..<Add to FOMA terminal phonebook> Saving an Entry in the UIM Phonebook ........... <Add to UIM phonebook> Saving the Redial/Received Record in the Phonebook ............95 Saving a Group ....................
Page 92: Phonebooks The Foma Terminal Can Use
Phonebooks the FOMA Terminal Can Use The FOMA terminal can use the FOMA terminal phonebook, UIM (FOMA card) phonebook, and PushTalk phonebook. The tables below indicate the data you can save in each Phonebook. ■Saved data in the FOMA terminal and UIM phonebooks ○: Can be saved ×: Cannot be saved FOMA terminal phonebook UIM phonebook...
Page 93: Saving An Entry In The Foma Terminal Phonebook
● When you receive a call to an Additional No. for the Multi Number, the ring tone set in the Number Setting (P.283) sounds. When the Des phone/mail tone, Call image, or Select phone/mail Illum. is set for both the Phonebook and Group setting, the setting for the Phonebook has higher priority.
Page 94 Enter a phone number at [ Up to three entries are available. Enter each entry within 26 digits. • You can save the pause (P), timer (T), “+”, “#”, and sub-address separator ( ). • If a phone number is saved with the “184” or “186” prefix, SMS cannot be sent to this phone number even if you select it.
Page 95 Select a Chara-den file from Chara-den of the Data box at [ Select a Chara-den character to be sent when placing a videophone call. To specify no Chara-den character Select [None]. A substitute image or your own image set in the Set outgoing image (P.76) is sent.
Page 96: Saving An Entry In The Uim Phonebook
Saving an Entry in the UIM Phonebook Up to 50 entries can be saved in the UIM (FOMA card) phonebook. Press ) in the stand-by display and press (Create). Select [UIM] and press To save an entry in the FOMA terminal phonebook Ｅｄｉｔｐｈｏｎｅｂｏｏｋ...
Page 97: Saving The Redial/Received Record In The Phonebook
Saving the Redial/Received Record in the Phonebook A phone number saved in the record can be directly added to the Phonebook. Example: Saving a received record in the FOMA terminal phonebook as a new entry Press ) in the stand-by display. To save a number from the redial record Press ) in the stand-by display.
Page 98: Saving A Group
Saving a Group Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook. • You cannot change [ No Group] in the UIM phonebook. Example: Saving a group in the FOMA terminal phonebook Press (Func) in the Phonebook.
Page 99: Displaying The Phonebook
Displaying the Phonebook You can use the Phonebook to perform various operations. Example: Displaying the FOMA terminal phonebook Press ) in the stand-by display. To display the UIM phonebook あかさたなはまやドコモ一郎 Press (UIM). Every time you press the key, the display switches ドコモ三郎...
Page 100: Searching The Phonebook
Searching the Phonebook The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press : Enter the first part of a reading within 32 half-width characters. [Name] Ｓｅａｒｃｈｐｈｏｎｅｂｏｏｋ...
Page 101: Editing A Phonebook Entry
Editing a Phonebook Entry From the Phonebook, select an entry and press Press (Edit). The Edit phonebook display appears. Edit each item. • Follow the same steps as in the Add to FOMA terminal phonebook (P.91, step 3 to 19) or in the Add to UIM phonebook (P.94, step 3 to 7).
Page 102: Checking The Number Of Entries Saved
Checking the Number of Entries Saved You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook. The Function menu appears.
Page 103 Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie ......... <Sound effect>...
Page 104: Setting The Ring Tone/Image/Indicator Color For Incoming Call And Mail
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk call, or mail, etc.). Example: Performing incoming mail settings From the Menu, select [Settings] →...
Page 105 Select an image from the Data box at [Incoming image]. • For Call and Videophone, you can set a GIF/JPEG image or Flash movie not exceeding 500K or 100K bytes in file size respectively and [VGA(640×480)] in image size from My picture, and an i-motion with video and sound tracks or with video track only of an image size of [sQCIF(128×96)] or [QCIF(176×144)] from i-motion.
Page 106: Setting The Sounds Of The Foma Terminal
● If several ring tones, call images, and incoming indicator colors are set for voice/videophone call/mail, the following priority is applied. 1. Ring tone of Number Setting (When you receive a call to an Additional No. for the Multi Number) 2.
Page 107: Adjusting The Volume Of Caller's Voice
● The Keypad and Charge sounds may not be heard under some conditions, such as when another sound is active. ● The 3D sound function reproduces a 3-dimensional stereophonic sound or space-wise moving sound, over a Flat-Plug Stereo Earphone Set (optional). This function lets you enjoy 3D sound i-αppli games and ring tones with realistic sound.
Page 108: Setting The Poor Signal Quality Alert
Setting the Poor Signal Quality Alert You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition. From the Menu, select [Settings] → [Call] → [Call quality] → [Quality alarm] and press [High] : Sound a high alarm tone.
Page 109: Muting The Ring Tone
Muting the Ring Tone All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.108). •...
Page 110: Changing The Manner Mode Settings
Changing the Manner Mode Settings The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. ＭａｎｎｅｒｍｏｄｅＳｅｔＯＦＦＭｏｄｅＭａｎｎｅｒＯｒｉｇｉｎａｌｍａｎｎｅｒ Select the type of the Manner mode at [Mode]. Press (Complete). The type of the Manner mode is changed.
Page 111: Setting The Stand-By Display
Setting the Stand-by Display You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] → [Display] → [Stand-by] and press [Stand-by display] : Set an image or i-αppli software to be displayed in the stand- Ｓｔａｎｄ−ｂｙｄｉｓｐｌａｙ...
Page 112: Setting Images For Placing A Call/Sending Mail
Select the font color of the calendar and clock at [Font color]. • You cannot change the font color of Saturdays and holidays in the calendar. Select the display format of the clock at [Clock style]. [12h] : Display in 12-hour format. [24h] : Display in 24-hour format.
Page 113: Setting The Display For Incoming And Outgoing Calls
Setting the Display for Incoming and Outgoing Calls You can use this function to set whether an image or the name of a caller/recipient specified in the Phonebook is displayed when you place/receive a voice/videophone call or right after receiving mail. From the Menu, select [Settings] →...
Page 114: Saving Power For The Display
Select [Display light] and press [Charging] : Set whether to keep the display light on during charging. ＤｉｓｐｌａｙｌｉｇｈｔＣｈａｒｇｉｎｇＯＦＦ [Videophone] : Set whether to keep the display light on during a videophone call. ＶｉｄｅｏｐｈｏｎｅＯＮ [Internet] : Set whether to keep the display light on while displaying sites or ＩｎｔｅｒｎｅｔＯＦＦ...
Page 115: Changing The Appearance Of The Menu
Changing the Appearance of the Menu You can switch the menu display modes, and also set images to customize nine icons displayed in the Normal mode menu. Example: Setting an image as the icon for i-mode From the Menu, select [Settings] → [Display] → [Menu setting] and press [Menu mode] : Switch the menu display mode (P.33).
Page 116: Setting The Font Size
● The indicator color for a missed call follows that set in the Incoming set. ● The indicator flashes in the following order of priority when there are mix of missed calls and unread mail/ messages. 1. Voice call indicator color 2.
Page 117 Security Settings ■About Security Codes Security Codes Used on the FOMA Terminal ..............116 Changing the Security Code ................ <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 119 ■Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
Page 118: Security Codes Used On The Foma Terminal
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the Network Services, i-mode password, etc. are available. Make use of the FOMA terminal using an appropriate security code according to the purpose.
Page 119: Puk Code
i-mode Password The 4-digit “i-mode password” is required when saving/deleting My Menu, subscribing to/ unsubscribing from the message service or the paid i-mode services, etc. (There may be other passwords for the i-mode used by IP (information service providers).) The i-mode password is set to “0000” at the time of subscription. It can be changed by yourself.
Page 120: Changing The Security Code
Changing the Security Code From the Menu, select [Settings] → [Management] → [Change code] and press Ｉｎｐｕｔｓｅｃｕｒｉｔｙｃｏｄｅ Enter the current Security code and press (OK). The entered Security code is displayed as asterisks ( ). • The Security code is set to “0000” at the time of purchase. Enter the new Security code and press (OK).
Page 121: Canceling The Pin Lock
Changing the PIN1 Code/PIN2 Code • To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears. Enter the Security code and press (OK).
Page 122: Various Locking Functions
Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Functions Description Lock all...
Page 123: Locking The Keypad To Prevent Unauthorized Use
Locking the Keypad to Prevent Unauthorized Use You can set the Lock all to prevent others from using the FOMA terminal. When the Lock all is set, you cannot perform any operation other than powering on/off the FOMA terminal. From the Menu, select [Settings] → [Lock/Security] → [Lock all] and press The Security code screen appears.
Page 124 Select [ON]/[OFF] of the Remote lock at [Set]. Enter the duration for counting the number of incoming calls at [Monitoring]. Enter from 01 to 10 minutes. Enter the number of calls to be received within the specified duration at [Times]. Enter from 03 to 10 times.
Page 125: Restricting Placing/Receiving Calls
Restricting Placing/Receiving Calls You can disable all functions that involve calls or communications, such as placing/receiving a voice or videophone call, originating/receiving a PushTalk call, and sending/receiving mail. You cannot use infrared communications or the infrared remote control, either (Self mode).
Page 126: Restricting Dialing From The Keypad
● When the PIM lock and Key dial lock are set simultaneously, “ ” is displayed instead of “ ”. ● If you set the PIM lock when data other than that preinstalled in the [Preinstall] folder of the Data box is set for the image, substitute image, or ring tone in the stand-by or other display, the setting is reset to the default setting.
Page 127: Locking The Keypad To Prevent An Accidental Use
Locking the Keypad to Prevent an Accidental Use While carrying around the FOMA terminal that is powered on, the keypad can be locked to prevent from pressing the keypad accidentally. • The following operations are available while the Lock key is set. Voice call While placing a call Stop (...
Page 128: Restricting Callers And Senders Setting The Display Of The Redial/Received Record
Setting the Display of the Redial/Received Record The Redial, Dial frequency, and Received record can be set not to be displayed. Playback of the Record message is also disabled. To cancel the Record display temporarily, enter the Security code. Press ) in the stand-by display and press (Func).
Page 129: Specifying Phone Numbers To Accept/Reject Calls
Specifying Phone Numbers to Accept/Reject Calls You can set to accept/reject voice, videophone, or PushTalk calls only from specific phone numbers. For the Accept/Reject calls, up to 20 phone numbers can be saved (List). You can also set to accept/reject calls only from specific groups in the FOMA terminal phonebook.
Page 130: Rejecting Calls With No Caller Id
Rejecting Calls with No Caller ID When receiving a voice, videophone, or PushTalk call without the caller’s phone number displayed, the reason for not displaying it is shown. You can decide whether to accept a call based on the reason. •...
Page 131: Rejecting Calls From Callers With No Phonebook Entry
Select [ON]/[OFF] at [Missed call display]. [ON] : Display all calls in the Received record. [OFF] : For a call the ring time of which is shorter than the set time, neither the missed call notification icon nor the received record is displayed. When the operation of the record message or videophone message is started, the notification icon of missed call appears and the received record is displayed.
Page 132: Other Measures "For Safety Operation" Other Measures "For Safety Operation
Other Measures “For Safety Operation” The following items are available for safety use of the FOMA terminal. Purpose Function/Service name Page Do not receive mail from unknown senders. Change Mail Address, Register a See the “i-mode Secret Code User’s Manual”. Receive/reject mail from the specific domains.
Page 133 Camera Before Using the Camera ....................132 Recording Still Images ................. <Record still images> Recording Movies ..................<Record movies> Displaying Saved Images ....................140 Changing the Camera Settings ..................140 Adjusting the Camera during Recording ................143 Setting the Camera Operation .................... 146 Using the Bar Code Reader ..............
Page 134: Before Using The Camera
Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail and set for the stand-by display, etc. To use the “Memory Stick Duo”, you need to obtain it separately. If you do not have a “Memory Stick Duo”, you can purchase it at a home electric appliance store or other similar store (P.251).
Page 135 About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data box] When saved to [Data box] YYYYMMDDhhmmss YYYYMMDDhhmmss • The recorded year, month, date, hour, minute, • The recorded year, month, date, hour, minute, second is displayed.
Page 136 About Recording Time of Movie The recording time of movie that can be saved in the FOMA terminal or the “Memory Stick Duo” varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■Estimated recording time of movie you can record and save in the FOMA terminal Recording time available for each movie Total recording time available...
Page 137 Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected. • You can use (Disp) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
Page 138: Recording Still Images
Guide Display In the Camera mode, use the Four-way keys (Up/Down/Left/Right arrow keys), the Enter key, the Mail key, the i-mode key, and the i-Channel/My Selection key according to the instructions shown in the guide display. Display Operations Display Operations Press Press ＦｕｎｃＰｌａｙＤｉｓｐＳｃｅｎｅ...
Page 139 Recording Images in Close to the Object You can record an object in close distance (about 7 cm). • When you rotate the macro switch, be careful not to touch the camera lens. Rotate the macro switch to the “ ” position in the Camera mode display. The Macro mode is set.
Page 140 Recording Images with Frames You can record an image with a frame, which can be selected from the preinstalled frames or downloaded frames. • The size of images recorded with a frame is determined according to the frame you selected and cannot be changed.
Page 141: Recording Movies
Recording Movies You can make movie recordings with the built-in camera. • The movie recording time varies depending on where to save a movie (P.134). When you save it to the “Memory Stick Duo”, you can record up to 60 minutes per movie. •...
Page 142: Displaying Saved Images
Displaying Saved Images You can check the saved image. • For details about the operation, see My picture (P.244) and i-motion (P.247). Example: Playing back a recorded still image Press (Play) in the Camera mode display. The recorded image appears. To display an image in enlarged or original size Press ).
Page 143 Select a scene and press The scene is set and the icon for the current scene type appears. • No icon appears for [AUTO]. Beach/snow People Party Night scene Landscape Sports Low Light Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording. (Func) in the Camera mode display, select [Shoot] →...
Page 144 Using the Auto Timer The Auto timer allows you to record yourself or others without holding the FOMA terminal. You can also set the interval until recording is started after you press the shutter. (Func) in the Camera mode display, select [Shoot] → [Auto timer], and Press press Ｓｈｏｏｔ...
Page 145: Adjusting The Camera During Recording
Adjusting the Camera during Recording Adjusting Brightness The image brightness (exposure) can be adjusted in seven levels from –1.0EV to +1.0EV according to the ambient condition (EV: Exposure Value). (Func) in the Camera mode display, select [Adjust] → [EV], and press Press •...
Page 146: The Display
Setting Spot Photometry When recording an object against light or an object with the strong contrast to the background, the exposure can be adjusted automatically with reference to the center of the display. (Func) in the Camera mode display, select [Adjust] → [Photometry], and Press press •...
Page 147 Adjusting White Balance The color balance of the image can be adjusted depending on the lighting condition. If a recording image appears in unnatural colors, set the white balance in accordance with the recording environment. (Func) in the Camera mode display, select [Adjust] → [White balance], and Press press •...
Page 148: Setting The Camera Operation
Setting the Camera Operation Selecting the Image Quality You can select the image quality for recording images. (Func) in the Camera mode display, select [Set] → [Image quality], and Press press Still image ＳｈｏｏｔＡｄｊｕｓｔＳｅｔ [Fine] : The highest image quality with larger file size. ＳｅｌｅｃｔｓａｖｅｔｏＤａｔａｂｏｘ...
Page 149 Restricting the Size of a File Used for Movie Recording You can restrict the size of a movie file to a file size that can be attached to i-mode mail. Press ) in the Camera mode display. The display switches to the Movie shoot display. (Func), select [Set] →...
Page 150 Selecting Where to Save Images You can set the place to save recorded images. Example: Selecting the “Memory Stick Duo” to save the recorded still images (Func) in the Camera mode display, select [Set] → [Select save to], and Press press [Memory Stick] : Save images in the “Memory Stick Duo”.
Page 151: Using The Bar Code Reader
Using the Bar Code Reader You can use the Out-camera to scan JAN or QR code. The scanned text data can be used for Phone To (AV Phone To), Mail To, Web To and i-αppli To functions, Bookmark and Phonebook entries, and also for displaying and copying/pasting text. Image and melody data scanning is also available.
Page 152 Locate the JAN/QR code at the center of the display and press (Scan). The scanning of the JAN/QR code starts. ＳｃａｎｎｉｎｇＳｃａｎｎｉｎｇＳｃａｎｎｉｎｇ When the scanning is completed, the end sound is heard and the data that has been scanned is displayed in the normal display. To save scanned data such as a phone number Move the cursor to data such as a phone number and from the Function menu, select [Add to phonebook] →...
Page 153 i-mode/i-motion ※i-mode is a paid service that requires a subscription. What is i-mode? ........................152 Displaying the i-mode Menu ................ <i-mode menu> ■Displaying a Site Displaying Sites ........................159 Using Sites ......................... 160 Saving a Site in My Menu .................. <My Menu>...
Page 154 What is i-mode? i-mode allows you to use the i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal) to access various online services such as site (program) connection, Internet connection, and i-mode mail. ●Site (Program) Connection Various online services offered by IP (information service providers), such as weather information and news, are available by selecting Menu List accessible from the i-mode menu.
Page 155 Site (Program) Connection Simple key operations allow you to connect to sites and use various online services provided by IP (information service providers). For example, you can use online services to check your bank balances or remit moneys, reserve tickets, read news, look up words in online dictionaries, and download ringer melodies.
Page 156 Other Features ●i-Channel Subscribers to i-Channel automatically receive graphics-based information such as the news and weather distributed to an i-mode terminal by DoCoMo or IP (information service providers). You can run the latest information updates on the stand-by display as Telop text by automatically getting this information on a regular basis.
Page 157 ●i-αppli DX i-αppli DX enables you to enjoy i-αppli more conveniently by working in conjunction with the i-mode terminal information (mail, Redial/Received record, Phonebook, etc.). For example, you can compose mail with your favorite character in the display, or set a character to notify you of the caller when receiving a call.
Page 158 ●SSL Communications SSL is a data communication system that secures user privacy by means of authentication/encryption technology. The SSL page encrypts data to prevent eavesdropping, tampering, impersonation, and forgery, assuring secure transmission of user’s private information, such as a credit card number and postal address.
Page 159: Internet Connection
●Message Services The message service is a service that delivers desired information (message) automatically to the i-mode terminal. There are two message service types: Message R (Request) and Message F (Free). Message R Deliver desired information automatically if you subscribe to a site that provides message services. (Request) Message F Deliver information free of packet communications charge.
Page 160 Important information about using i-mode ● The data on sites (programs) or Internet sites is generally protected by the copyright laws. Part or all of the data such as documents and graphics obtained to the i-mode terminal from these sites (programs) or Internet sites cannot be sold or redistributed, whether they are changed or not, without consent of the copyright holders except for personal use.
Page 161: Displaying Sites
Displaying Sites Various sites offered by IP (information service providers) can be displayed (the subscription is necessary for some sites). From the i-mode menu, select [i Menu] → [メニューリスト] (Menu List) and press モーション／Ｖライブ天気／ニュース／情報モバイルバンキング証券／カード／保険交通／地図／旅行ショッピング／チケットファッション／コスメグルメ情報...
Page 162: Using Sites
Using Sites Selecting Links/Textbox/Check Box, etc. When using a site, you may display a linked site, enter texts (textbox) or select an item from multiple options (radio button and check box). ■Link Select a link to display the page. ＷｅａｔｈｅｒＷｅａｔｈｅｒｎｅｗｓ...
Page 163 Displaying the Previous/Next Page The FOMA terminal stores up to 20 most recently displayed site pages in its cache. Site pages stored in the cache are cleared when you terminate i-mode. When the left or right arrow is displayed in the guide display, the pages stored in the cache can be used for display using without accessing the site.
Page 164 Displaying a Site Correctly If the display of the text is incorrect on a site, you can reload the page after changing the character code. While displaying a site, press (Func). The Function menu appears. Select [Word translate] → [Convert]/[Auto select] and press [Convert] : Sequentially convert the character codes and display the page again.
Page 165 Saving a Site in My Menu If you save the frequently used sites in My Menu, you can access them easily from next time. Up to 45 sites can be saved in My Menu. • Only i-mode sites can be saved in My Menu. To save Internet sites, use the Bookmark. While displaying a site, select [マイメニュー登録] (Save My Menu) and press •...
Page 166 Displaying Internet Sites i-mode compatible Internet site can be displayed from the i-mode terminal. • Sites that are not compatible with i-mode may not be displayed correctly. From the i-mode menu, select [Go to location] → [URL address] and press The URL address display appears.
Page 167 Saving a Site to Display It Quickly Up to 200 URLs of the sites you display frequently can be saved in the Bookmark. The sites can be directly accessed from the Bookmark. • Both i-mode and Internet sites can be saved as bookmarks, but with some exceptions. •...
Page 168 Adding/Deleting Folders Folders in which bookmarks are saved can be added or deleted. Up to 10 folders can be used to manage bookmarks and folder names can also be changed. • You cannot delete the top folder in the list (default: [ブックマーク] (Bookmark)). Example: Adding a folder From the i-mode menu, select [Bookmark] and press , then press...
Page 169: Deleting A Bookmark
Deleting a Bookmark You can delete bookmarks using four methods. Example: Deleting a bookmark From the i-mode menu, select [Bookmark] and press To delete all bookmarks From the Function menu, select [Delete all], enter the Security code, and select [Yes]. Select a folder and press To delete all bookmarks in the folder From the Function menu, select [Delete] →...
Page 170 Saving a Site in the Screen Memo You can save your favorite sites as a screen memo. You can also instantaneously call up a saved screen memo. • You can save up to 100 screen memos, each up to 100K bytes. The number of screen memos that can be saved varies between 10 and 100 depending on the size of each screen memo to be saved.
Page 171 Protecting a Screen Memo You can protect screen memos from being overwritten. You can protect up to 50 screen memos (up to 500K bytes). Select a screen memo from the screen memo list and press (Func). The Function menu appears. To cancel the protection Move the cursor to the protected screen memo and press (Func).
Page 172 Obtaining Graphics from a Site/Message You can load and save your preferred graphic from images and background images displayed on sites, screen memos, messages, mail, and ToruCa(detail) cards (i-anime compatible). You can set the obtained GIF and JPEG images for the stand-by display, as a call image, menu icon, etc., and the Flash movie for the stand-by display, as a call image, etc.
Page 173 Downloading Data from Related Sites You can download i-melody, PDF data, Chara-den, ToruCa cards, Deco-mail templates, and dictionaries from related sites. ■Files that can be downloaded Maximum size Maximum number Type Format Restrictions to be saved to be saved Melody SMF, MFi 100K bytes 10 to 200 files...
Page 174 Using the Phone To/Mail To/Web To/i-αppli To You can use highlighted information in a site, message, mail main body, i-motion Telop text, i-αppli, ToruCa card, PDF data, and i-Channel channel list to place a call, compose mail, display an Internet website, start i-αppli, or perform infrared communications. •...
Page 175 Accessing a Site from the Current Display If the current display contains any URL, the site can be accessed directly from the display (Web To). Select a link (URL) in the display and press The FOMA terminal is connected to the linked site. Running i-αppli from the Current Display If the current display contains any i-αppli link, the software can be started to run directly from the display.
Page 176 Setting i-mode Setting Whether to Receive a PushTalk Call during i-mode You can set whether to receive a PushTalk call by disconnecting i-mode if there is any incoming PushTalk call during i-mode or i-mode communications. From the i-mode menu, select [i-mode setting] → [i-mode Arrival Act] and press [Prefer PushTalk] : Receive the PushTalk call and disconnect i-mode.
Page 177 Changing the i-mode Host (ISP Connection Communication) ※ You do not need to change the Host setting when using the i-mode service of DoCoMo. You can set up to 10 hosts for receiving services other than the services provided by i-mode (DoCoMo).
Page 178 Setting Whether to Use Saved Data for Flash Movies You can set whether to use the saved data (P.162) when you play back a Flash movie displayed on a site or saved in the Screen Memo. From the i-mode menu, select [i-mode setting] → [Use phone info] and press Select [Yes]/[No] and press The Use phone info is set.
Page 179: Receiving A Message
Receiving a Message When a message is received while in the stand-by display, the contents of the message are automatically displayed. Up to 20 Message R and Message F each can be saved in the FOMA terminal. When receiving a message, “ ” or “ ” flashes. Ｒｅｃｅｉｖｉｎｇ...
Page 180: Checking A New Message
Checking a New Message New messages held at the i-mode center while the FOMA terminal is powered off or outside of the i-mode service area can be checked. • Depending on the radio wave condition, you may not be able to check new messages. Press (Mail) for over a second in the stand-by display.
Page 181: Deleting A Message
Protecting a Message Message R or Message F can be protected from being overwritten. • An unread message cannot be protected. Example: Protecting Message R From the i-mode menu, select [Message] → [MessageR] and press To protect Message F From the i-mode menu, select [Message] → [MessageF]. Select a message and press (Func).
Page 182 Operating the SSL List You can set to validate/invalidate the certificate that is required to connect to an SSL site. From the i-mode menu, select [i-mode setting] → [SSL list] and press [CA certify] : An authentication company issues these certificates. They are ＳＳＬｌｉｓｔ２０...
Page 183 Select [English] and press ＦｉｒｓｔＰａｓｓＲｅｑｕｅｓｔｙｏｕｒｃｅｒｔｉｆｉｃａｔｅＤｏｗｎｌｏａｄｙｏｕｒｃｅｒｔｉｆｉｃａｔｅＯｔｈｅｒｓｅｔｔｉｎｇｓＴｈｅｕｓａｇｅｒｅｇｕｌａｔｉｏｎ（Ｊａｐａｎｅｓｅｏｎｌｙ） Select [Request your certificate] → [Continue] and press To void the issued certificate Select [Other settings] → [Revoke your certificate] → [Yes], enter the PIN2 code, and select [Continue] →...
Page 184 Changing the Host for Certificate Issue ※ Normally, you do not need to change the setting. When you want a service other than FirstPass services, you can set one host. Note that if you change the setting, you cannot connect to the FirstPass Center. •...
Page 185 What is i-motion? i-motion is movie data that contains both video and sound tracks. You can play back an i-motion on the FOMA terminal and set a saved i-motion for the stand-by display. The i-motion can be of the following types. The type of i-motion varies depending on a site and cannot be selected.
Page 186 ● Some i-motion may not be played back/saved properly even if its data is downloaded successfully. ● The playback may be paused or the image may be distorted when you play back i-motion while downloading data depending on the radio wave condition, communication line conditions, or the communication speed. A standard type i-motion allows you to play back as many times as you want after downloading (using the saved data).
Page 187 Mail Mail Function of the FOMA Terminal ................... 186 What is i-mode Mail? ......................187 Displaying the Mail Menu ................<Mail menu> ■Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail ........... <Compose and send mail> Composing and Sending Deco-mail ........<Compose and send Deco-mail>...
Page 188: Mail Function Of The Foma Terminal
Mail Function of the FOMA Terminal The FOMA terminal provides two types of mail functions: i-mode mail and SMS. To use i-mode mail, you need to subscribe to i-mode. Mail Transmission Function ■FOMA terminal → FOMA terminal You can use i-mode mail or SMS to send a message from a FOMA terminal to another FOMA terminal.
Page 189: What Is I-Mode Mail
What is i-mode Mail? When subscribing to the i-mode service, mail can be exchanged with i-mode terminals (including Mova) as well as e-mail over the Internet. The mail address when subscribing to i-mode is as follows. If you are a new subscriber to the i-mode service The portion of your mail address before the @ mark is a random combination of alphanumeric characters and symbols.
Page 190 Make Settings for Mail The following settings are available. <Access to the individual setting> [i Menu] → [オプション設定] (Options) → [メール設定] (Mail Settings) → 【Individual setting item】 • For further information, see the “i-mode User’s Manual” you receive when you sign up for i-mode. ●Changing your mail address 【...
Page 191 Number of Characters You Can Send/Receive The number of characters sent or received in i-mode mail is as follows. Full-width characters Half-width characters Item (kanji, hiragana, pictographs, etc.) (alphanumeric characters, katakana, etc.) Subject 15 characters 30 characters Mail address − 50 characters Main body 5,000 characters...
Page 192 Other Features ●Mail with file attachment Mail with melody file attachment You can send/receive i-mode mail attached with a melody file downloaded from a site or Internet website. (You cannot send a melody file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
Page 193 ●i-motion mail You can send/receive mail with a movie file attachment recorded using an i-motion mail compatible terminal and with a movie downloaded from a site to/from i-motion mail compatible terminal, PC, and other company’s mobile phone. (You cannot send a movie file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
Page 194 About SMS (Short Message Service) You can exchange messages between FOMA terminals without subscribing to i-mode. • Sending SMS (P.220) • Receiving SMS (P.221) • Checking new SMS (P.221) • See DoCoMo’s website to send/receive SMS to/from an overseas telecommunications company other than DoCoMo. Number of Characters You Can Send/Receive The number of characters that can be sent/received by SMS is indicated in the table below.
Page 195: Displaying The Mail Menu
Displaying the Mail Menu Press (Mail) in the stand-by display. Menu name Function Ｍａｉｌｓｈｏｒｔｃｕｔ Inbox Display, reply to or forward received mail (P.208). ＩｎｂｏｘＯｕｔｂｏｘ Outbox Display, forward or edit sent mail (P.208). ＤｒａｆｔＣｏｍｐｏｓｅｍｅｓｓａｇｅ Draft Display mail that was saved without being sent and sent ＣｏｍｐｏｓｅＳＭＳ...
Page 196 ● When the number of saved draft mail has reached 50 or there is not enough memory left for draft mail, you cannot compose new mail nor edit draft mail. ● If new mail is sent when the number of saved sent mail has reached 500 or there is not enough free space, the unprotected sent mail is overwritten from the oldest.
Page 197: Composing And Sending Deco-Mail
Composing and Sending Deco-mail You can compose and send Deco-mail, i-mode mail that has a decorated main body. • Deco-mail may not be received or displayed correctly depending on the recipient’s terminal model. Main body input display Preview display Icons for the Ｉｎｐｕｔｔｅｘｔ...
Page 198 Press (Send). To save the composed Deco-mail as a template From the Function menu, select [Save template] → [Yes]. The Deco-mail is saved in Templates. ● Even if you delete a decorated character, the data used for decoration may not be erased and the number of characters in the mail main body that you can enter could be reduced.
Page 199 Enter the main body. Enter text within 5,000 full-width or 10,000 half-width characters. • Number of characters permitted in the main body may be reduced depending on the type and volume of decoration you use. Specifying Decoration After Entering the Main Body Press (Func) in the main body input display.
Page 200: Using A Template To Send Mail
Using a Template to Send Mail A template is a model used for Deco-mail, which is preset with decorations for the main body. You can use templates to easily compose/send Deco-mail. You can download a template from a site and also save up to 50 composed/received/sent Deco-mails as templates (P.195).
Page 201: File Attachment
File Attachment You can send i-mode mail with a still image, melody, and ToruCa card attachment. You can also send i-motion mail with a movie/i-motion attachment. ■Files that can be attached Size Maximum number Type Format Restrictions restriction of attached files ・...
Page 202: Saving I-Mode Mail To Send Later
Select a file type → a folder → a file and press The file is attached and “ ”, “ ”, “ ”, “ ”, or “ ” appears. Ｅｄｉｔｍａｉｌ To check an image/movie/melody ２００６０８１４１８３００６．ｊｐｇ Move the cursor to a file and press (Play).
Page 203: Receiving I-Mode Mail
Receiving i-mode Mail When mail is sent to the i-mode center, the FOMA terminal automatically receives them. While receiving mail, “ ” flashes. Ｒｅｃｅｉｖｉｎｇｍａｉｌ When receiving is completed, “ ” is displayed, the indicator flashes, the Ｕｎｒｅａｄｍａｉｌ／ｍｅｓｓａｇｅ ring tone sounds, and the number of received mail is displayed. The display before receiving reappears after about 15 seconds.
Page 204: Selecting To Receive I-Mode Mail
Selecting to Receive i-mode Mail You can check through mail held at the i-mode center, where you can select mail to receive and delete mail without receiving it based on the information such as mail subject. • To use this function, set the Receive option setting [ON]. When the Receive option setting is [ON], i-mode mail is not received automatically (P.216).
Page 205: Checking New I-Mode Mail
Checking New i-mode Mail New mail held at the i-mode center while the FOMA terminal is powered off or outside of the i-mode service area can be checked. • Depending on the radio wave condition, you may not be able to check new mail. Press (Mail) for over a second in the stand-by display.
Page 206: Forwarding I-Mode Mail
Forwarding i-mode Mail You can forward received mail to another person. A file attachment is also forwarded. Example: Forwarding received mail From the received mail list, select mail and press (Func). The Function menu appears. Select [Forward] and press The Edit mail display appears. “Fw: title of the received mail”...
Page 207: Saving The Mail Address/Phone Number In The Phonebook
Saving the Mail Address/Phone Number in the Phonebook Saving the Sender’s/Recipient’s Mail Address in the Phonebook You can save the mail address of a received mail sender and recipient or sent/saved mail recipient in the Phonebook. Example: Saving the mail address of a received mail sender to the FOMA terminal phonebook as a new entry From the received mail list, select mail, press , and press...
Page 208: Playing Back/Saving A File Attachment Received In I-Mode Mail
Select [Add to phonebook] and press The screen for selecting how to save to the Phonebook appears. Select [New] and press The screen for selecting where to save appears. When you select [Add] Select an entry to which you want to add the phone number from the Phonebook. Select [Main memory] and press The Edit phonebook display appears.
Page 209 Example: Saving a file attachment received in mail From the received mail list, select mail and press Select a file attachment and press (Func). The Function menu appears. To play back/save a movie/i-motion attachment Select a URL in the main body → [Yes] to obtain its movie/i-motion. Follow the same procedures described in the Download i-motion (P.183, step 1 to 2) or in the Add to UIM phonebook (P.81, step 3).
Page 210: Displaying Received/Sent/Saved Mail
Displaying Received/Sent/Saved Mail You can display received/sent/saved mail any time you want. Received mail and sent mail are saved in [Inbox] and [Outbox] respectively, and mail saved without being sent or sent unsuccessfully is saved in [Draft]. • [Inbox], [Outbox], and [Draft] accommodate up to 1000 received mails, up to 500 sent mails, and up to 50 saved mails respectively.
Page 211: Phone Numbers
File attachment type With image attachment exceeding 10,000 bytes With melody attachment With image attachment With ToruCa card attachment With movie attachment (Sent/saved mail only) With i-αppli To To display mail addresses or phone numbers When saved in the Phonebook, the name is displayed instead of the mail address/phone number.
Page 212 Adding/Deleting Folders In addition to [Inbox]/[Outbox], you can create up to 20 folders each to manage received and sent mail. Besides these folders, additional five folders are reserved for i-αppli with mail each in [Inbox]/[Outbox]/[Draft]. You can also change a folder name or sort the folders. •...
Page 213 Moving Mail to a Different Folder You can move received/sent mail to another folder using three methods. Example: Moving received mail From the Mail menu, select [Inbox] → a folder and press To move all mail in a folder From the Function menu, select [Move] → [Move all] → [Yes] → a folder. To move several mails From the Function menu, select [Move] →...
Page 214: Deleting Mail
Deleting Mail You can delete the received or sent mail using the following six methods. Delete one Delete a mail in the folder. Select&delete Delete several mails in a folder. Up to 30 mails can be selected at a time. Delete read msg (for received mail only) Delete all read mail.
Page 215 Select [Brows mail mode] and press The i-αppli mail can be displayed as regular mail. Checking the Number of Mail Saved The number of mail saved can be checked for each folder. Example: Checking the number of received mail saved From the Mail menu, select [Inbox] and press Select a folder and press (Func).
Page 216: Setting The Mail Function Of The Foma Terminal
Setting the Mail Function of the FOMA Terminal Assigning Separate Folders for Mail You can save requirements to sort received mail so that they can be automatically assigned to folders. Up to 30 sorting requirements can be saved. From the Mail menu, select [Mail setting] → [Sort inbox] and press To delete a sorting requirement Ｓｏｒｔｉｎｂｏｘ...
Page 217 ● If mail satisfies several sorting requirements, the sorting requirement with a lower number in the list has higher priority. If you set [None] for sorting requirement, the sorting requirements lower than the number you set become invalid, and mail is sorted to the folder for which [None] is set. ●...
Page 218 Setting the Type of Mail/Message to Be Checked You can set whether to receive mail, Message R, and Message F when making inquiries to the i-mode center. Example: Setting the i-mode inquiry set for mail From the Mail menu, select [Mail setting] → [Common setting] → [i-mode inquiry set] and press ｉ−ｍｏｄｅｉｎｑｕｉｒｙｓｅｔ...
Page 219 Setting a Mail List By saving mail addresses in a mail list, you can send mail to all members in the list at the same time. Up to 10 mail lists can be saved. Up to five mail addresses can be saved in each mail list. From the Mail menu, select [Mail setting] →...
Page 220 Playing a Melody Automatically from Mail The melody can be set to be played back automatically when displaying mail or message. From the Mail menu, select [Mail setting] → [Common setting] → [Melody auto play] and press Select [Auto play]/[OFF] and press The Melody auto play is set.
Page 221 Enabling the Receiving of a File Attachment You can set whether to receive an image, melody, or ToruCa card attachment in i-mode mail. From the Mail menu, select [Mail setting] → [Attached file set] and press Select [Accept all]/[Accept slected]/[Reject all] at [Attached file]. [Accept all] : Accept receiving of all file attachments.
Page 222: Composing And Sending Sms (Short Message Service)
FOMA terminals. • You can exchange SMS with recipients/senders who subscribe to an overseas telecommunications company other than DoCoMo. See the NTT DoCoMo website for information about countries and overseas telecommunications companies you can use for sending/receiving SMS. • Even when the Notify caller ID is set to [Not notify], an SMS recipient is notified of the sender’s phone number.
Page 223: Receiving Sms (Short Message Service)
Receiving SMS (Short Message Service) The FOMA terminal automatically receives SMS. You can save up to 1,000 received SMS including i-mode mail in [Inbox]. While receiving SMS, “ ” flashes. ＲｅｃｅｉｖｉｎｇＳＭＳ When SMS reception is completed, “ ” is displayed, the incoming Ｕｎｒｅａｄｍａｉｌ／ｍｅｓｓａｇｅ...
Page 224: Setting Sms (Short Message Service)
Setting SMS (Short Message Service) ※ Normally, you do not need to change the SMSC, Type of Number, and address settings. From the Mail menu, select [Mail setting] → [SMS setting] and press [Language] : Select whether a message to be sent is going to be displayed ＳＭＳｓｅｔｔｉｎｇ...
Page 225 i-αppli What is i-αppli? ........................224 Downloading i-αppli from a Site ..................225 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ............ <i-αppli stand-by> Managing i-αppli ......................... 231 Using Various i-αppli Functions ..................232 The default setting for each function is provided in the list of menus (P.296).
Page 226: What Is I-Αppli
What is i-αppli DX? What is i-αppli? i-αppli DX enables you to enjoy i-αppli more conveniently By downloading i-αppli from its site, the i-mode by working in conjunction with the i-mode terminal compatible FOMA terminal (hereinafter referred to as information (mail, Redial/Received record, Phonebook, i-mode terminal) can be made more useful in many ways.
Page 227: Downloading I-Αppli From A Site
Other Features Downloading i-αppli from a Site ● i-αppli stand-by display • Up to 100 i-αppli software can be saved. The number of i-αppli i-αppli stand-by display enables you to set i-αppli for the software that can be saved varies between 10 and 100 stand-by display and to receive mail or place a call from depending on the size of each i-αppli software to be saved.
Page 228: Running I-Αppli
● Running i-αppli If you have deleted preinstalled software, you can download it from “SO@Planet”. [i Menu] → [メニューリスト] → [ケータイ電話メーカー] → [SO@Planet] i-αppli software can be set to run manually. ● The message “Terminal and UIM ID will be sent” may Press (i-mode) for over a second in the stand-by appear when downloading.
Page 229 Setting i-αppli Operating Conditions ● The sound from running i-αppli software is heard at the same volume level as set for the incoming call ring volume. It is heard at the volume level 3 when you set [STEP DOWN] • It may not be possible to change some items of the saved or [STEP UP] for the incoming call ring volume.
Page 230 • Making initial setting Preinstalled Software 1. Set the DVD recorder to connect to the Internet. (For more information, see the user’s manual supplied with your DVD recorder.) Default settings of the preinstalled software are indicated 2. Start this appli, select “リモート録画予約” (Remote in the table below.
Page 231 “DCMX” is an “iD” compatible credit service provided you set on the FOMA terminal. by NTT DoCoMo group. Three types of services are • For further information, see the “i-mode User’s Manual”. available in DCMX: DCMX mini in which the total amount of credit is limited to ¥10,000, and DCMX and DCMX...
Page 232: Running I-Αppli Automatically
Running i-αppli Automatically ● The Auto start does not operate in the following cases. When the FOMA terminal is powered off During a call/communications When the date/time is not set Enabling/Disabling Auto Start When another function is executed If you set the same time for the Auto start of software, You can set whether to start i-αppli software automatically Schedule alarm, and Alarm on the FOMA terminal.
Page 233: Managing I-Αppli
Moving i-αppli to a Different Folder Managing i-αppli You can move software to a different folder using three • For some software, IP (information service providers) may methods. access the software saved in the mobile phone and directly Example: Moving a software stop the use of it.
Page 234: Using Various I-Αppli Functions
While running the software, start the camera function. Checking Error History and Trace Result The Camera mode display appears. The error histories for the i-αppli stand-by display and Point the camera at the object and press the results output by the i-αppli trace feature can be The image is recorded.
Page 235 i-Channel What is i-Channel? ......................234 Displaying the i-Channel ..................... 235 The default setting for each function is provided in the list of menus (P.296).
Page 236 There are two types of channels: “Basic channel” and What is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can use The i-Channel service provided by DoCoMo or another it from the moment you start using the i-Channel service. IP (information service providers) distributes graphics- The packet communications charge required for automatic based information including news and weather to...
Page 237 Displaying the i-Channel When You Receive i-Channel When you receive information, the Press (i.ch) in the stand-by display. information is automatically run as Telop text on the stand-by display. To display the channel list Press (i.ch). → 最高２８℃ １０ Telop The channel list appears. ●...
Page 239 Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ......................238 Starting an Osaifu-Keitai-compatible i-αppli ............... 239 What is ToruCa? ......................... 240 Obtaining a ToruCa Card ..................<ToruCa> Displaying a ToruCa(detail) Card ............. <Display ToruCa(detail)> Setting Whether to Obtain a ToruCa Card ..........<ToruCa receive> Managing ToruCa Cards .....................
Page 240: What Is Osaifu-Keitai
● What is Osaifu-Keitai? The application procedure for using Osaifu-Keitai- compatible services varies from one service to another. Please inquire at the relevant contact office, such as your IP (information service providers). For precautions on the “Osaifu-Keitai” provides convenient i-mode functions use of each Osaifu-Keitai-compatible service, see the (i-mode FeliCa) that can be performed using the IC “i-mode User’s Manual”.
Page 241: Starting An Osaifu-Keitai-Compatible I-Αppli
Using the Osaifu-Keitai Starting an Osaifu-Keitai- compatible i-αppli When you hold up and show the FeliCa mark “ ” side of the FOMA terminal to a reader/writer (external device), You have access to useful functions, for example, reading/ you can use the FOMA terminal for payment as e-money writing data on the IC card using an Osaifu-Keitai- or use it in place of a train ticket.
Page 242: What Is Toruca
Obtaining a ToruCa Card What is ToruCa? ToruCa is an e-card that can be obtained using Osaifu- You can hold up and show the FOMA terminal to a reader/ Keitai. This convenient e-card can be used for writer (external device) to obtain a ToruCa card. applications such as flier, restaurant card, or coupon.
Page 243: Setting Whether To Obtain A Toruca Card
Select a ToruCa card and press Managing ToruCa Cards Index Category icon Adding/Deleting Folders You can create and delete a folder for saving a ToruCa card. You can manage up to 21 folders. You can also change the name of a folder or sort folders in the list. •...
Page 244: Locking The Ic Card Function
Protecting a ToruCa Card Searching a ToruCa Card You can protect a ToruCa card from being overwritten. You can search for ToruCa cards by category icons. You can set protection for up to 50 ToruCa cards (up to Press (Func) in the ToruCa folder list. 500K bytes).
Page 245 Displaying/Editing/ Managing Data ■Using Still Image Displaying the Saved Image ................<My picture> Editing Still Images ..................<Edit photo> ■Using Movie Playing Back Movie/i-motion ................<i-motion> Editing Movie ....................<Edit movie> ■Using Chara-den What is Chara-den? ..................<Chara-den> ■Using the Melody Playing Back a Melody ..................
Page 246: Displaying The Saved Image
Select an image and press Displaying the Saved Image You can display images saved in My picture of the Data box of the FOMA terminal or the “Memory Stick Duo”. Press ) in the stand-by display, select [My picture], and press My picture folder list appears.
Page 247: Editing Still Images
Displaying Images as a Slideshow Adding a Frame JPEG images saved in My picture can be displayed by A frame can be added to an image of [sQCIF(128×96)], switching them automatically. [QCIF(176×144)], [Stby(320×240)], and [CIF(352× 288)]. Press (Func) in My picture file list. Example: Adding a frame and saving by overwriting The Function menu appears.
Page 248: Adding Text
Adding Text Trimming Part of an Image After Zoom In Text can be added to an image of [sQCIF(128×96)], You can specify a part of an image after zooming in on it [QCIF(176×144)], [Stby(320×240)], and [CIF(352× and trim it into a size of [sQCIF(128×96)], [QCIF(176× 288)].
Page 249: Playing Back Movie/I-Motion
Select a folder and press Rotating an Image Ｃａｍｅｒａ１／８ Management title Ｆｌｏｗｅｒｓａｎｄｃ An images of [sQCIF(128×96)], [QCIF(176×144)], Ｏｎｅｅａｒｌｙａｆｔ [Stby(320×240)], [CIF(352×288)], and [VGA(640× 480)] can be rotated. Ｃｈｕｍｍｙｔｗｏ Example: Rotating an image and saving by overwriting Ｉｔｌｏｏｋｓｂｉｇ From My picture file list, select an image, press The i-motion file list appears.
Page 250: Editing Movie
Select a movie/i-motion and press Editing Movie You can edit a movie recorded with the FOMA terminal. Clipping a Still Image from a Movie You can save a paused movie image as a still image. The selected movie/i-motion appears. From the i-motion file list, select a movie, press To turn off the icons and guide display of the display Press (Display).
Page 251: What Is Chara-Den
Select [Attach to mail(S)]/[Attach to mail(L)] and press What is Chara-den? You can send an avatar of your choice instead of your own image when you use the videophone function. You can make this avatar move by pressing the keys on the keypad.
Page 252: Playing Back A Melody
Displaying and Operating Chara-den Playing Back a Melody You can display Chara-den characters saved in the You can play back a melody saved in Melody of the Data Chara-den folder of the Data box. box of the FOMA terminal and in Melody of the “Memory Stick Duo”.
Page 253: Melody
■ Removing the “Memory Stick Duo” “Memory Stick Duo” You can save Phonebook, mail, Bookmark, and other data in the FOMA terminal to the “Memory Stick Duo”, as well as copy data in the “Memory Stick Duo” to the FOMA terminal.
Page 254: Folder Setup Of The "Memory Stick Duo
Folder Setup of the “Memory Stick Duo” ■ When displaying the folders on a PC When you copy data of the FOMA terminal to the “Memory Stick Duo”, a corresponding folder is created automatically. “Memory Stick Duo” DCIM nnnMSDCF DSC0nnnn.JPG ....... DCF standard still image file (JPEG image) MOBILE DOCOMO NAMECARD...
Page 255: Data That Can Be Written/Read To And From The "Memory Stick Duo
Data That Can Be Written/Read to and from the “Memory Stick Duo” • It may take time to save data depending on the data size. • Data saved from the “Memory Stick Duo” may not be displayed/played back properly. • You cannot copy/move a file prohibited from being retrieved out of the FOMA terminal. Data you can/ Data you can/cannot cannot save from...
Page 256: Copying/Moving Data From The Foma Terminal To The "Memory Stick Duo
Select data and press (Func). Copying/Moving Data from the FOMA The Function menu appears. Terminal to the “Memory Stick Duo” Select [Save to main] and press The Security code screen appears. You can copy the FOMA terminal phonebook, Text memo, Schedule, mail, Bookmark, ToruCa card, melody, image, Enter the Security code and press (OK).
Page 257: Managing The "Memory Stick Duo
Example: Copying data from the FOMA terminal phonebook to Managing the “Memory Stick the UIM phonebook Duo” From the FOMA terminal phonebook, select data and press (Func). The Function menu appears. Formatting the “Memory Stick Duo” To copy several data From the Function menu, select [Copy to UIM] →...
Page 258: Managing Data Box
Example: Displaying the file list in the [Preinstall] folder in My Managing Data Box picture Press ) in the stand-by display. Data handled by the FOMA terminal, such as downloaded Ｄａｔａｂｏｘ data and data recorded using the camera, are saved in Ｍｙｐｉｃｔｕｒｅ...
Page 259: Deleting Data
Adding/Deleting Folders Deleting Data You can create or delete a folder for saving data. You You can delete data using three methods. can add up to 10 folders by category. You can also • You cannot delete preinstalled data other than Chara-den files. change the name of a folder.
Page 260 Displaying/Editing Data Information Setting How to Display a List of Images You can change the data management title and file name, You can select the display style of My picture and i-motion and set file restrictions. The management title is displayed file list using the following three methods.
Page 261 ■ List of display items and items that can be edited ◎: Can be edited ○: Display only −: Not displayed My picture Movie/ Display item Melody Chara-den Description JPEG image GIF image Flash movie i-motion document Management title ◎ ◎...
Page 262: Checking The Memory Of The Foma Terminal
Select a folder → software and press Checking the Memory of the ソフト一覧１／１２ソフト一覧１／１２ FOMA Terminal ＸＸＸｇａｍｅＸＸＸｇａｍｅＸＸＸｑｕｉｚＸＸＸｑｕｉｚＡｑｕａＸＸＸｆｒｉｅｎｄＡｑｕａＸＸＸｆｒｉｅｎｄＸＸＸＳａｎｇｕｏｚｈｉＸＸＸＳａｎｇｕｏｚｈｉ You can display the memory use status of the FOMA Ｕｓｅｄ（Ｄａｔａ）６４ＫＢＵｓｅｄ（Ｄａｔａ）６４ＫＢ terminal. You can also check the volume used up by the Ｓｈｏｒｔａｇｅ６４ＫＢ...
Page 263: Data That Can Be Sent/Received Via Infrared Communications
Data That Can Be Sent/Received via Infrared Communications You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, PDF data, and ToruCa card between mobile phones and other devices equipped with the infrared communications function.
Page 264: Receiving Data Using The Infrared Communications
Receiving Data Using the Sending Data Using the Infrared Communications Infrared Communications Receiving Data Sending Data From the Menu, select [Tools] → [Rcv Ir Data] → Select data to be sent and press (Func). [Receive] and press The Function menu appears. “...
Page 265: Using The Infrared Remote Control
My document file list appears. Using the Infrared Remote Control • The title line shows the folder name and the figures at the right end of the title line show the order of the PDF data at the cursor/the total number of PDF data in the folder. Once infrared remote control software is downloaded from •...
Page 266 Searching a Character String of PDF Data ● The i-mode bookmarks/marks that you have added may be deleted if they are copied to a PC, etc. using infrared communications or the “Memory Stick Duo”. Press (Search) in the PDF data display. Ｓｅａｒｃｈｃｒｉｔｅｒｉａ...
Page 267 Other Useful Functions Multiaccess Feature ..................<Multiaccess> Multitask Feature ....................<Multitask> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> Performing Frequently Used Functions Quickly ........... <My Selection> Recording Recipient’s or Your Own Voice ............ <Voice memo> Checking the Call Duration and Charge ..........
Page 268: Multiaccess Feature
Placing a Voice Call during i-mode/Packet Multiaccess Feature Communications Multiaccess is a function that enables you to use a voice Example: Placing a voice call during i-mode call, packet communications, and SMS functions at the Press (MENU) during i-mode or packet commu- same time.
Page 269: Multitask Feature
Activating a New Function Multitask Feature Press (MENU) during the activation of a function. Multitask is a function that enables you to perform several functions at the same time, each of which you can access by switching the displays. • For multitask combinations, see P.314. Using the Display during the Multitask Operation From the Menu, select a new function and press...
Page 270: Starting The Alarm At A Specified Time
Select an alarm tone from Melody/i-motion of the Starting the Alarm at a Data box at [Alarm]. Specified Time • You can set a melody in the SMF/MFi format from Melody and an i-motion with sound track only or with video and sound tracks of an image size of [sQCIF(128×96)]/ The alarm is activated for about one minute at a specified [QCIF(176×144)] from i-motion.
Page 271: Saving Schedules
Enter a starting time at [ ]. At the Alarm Time Enter a time in 24-hour format. To set the schedule period to all day The alarm tone sounds for about one minute with the Select [ON] at [All day]. When it is set to [All day], you indicator flashing.
Page 272 Set the volume at [Alarm volume]. ● If the schedule set for the 31st is set to the [Month] repeat Select from [OFF] and [1 to 5]. type, the schedule is set for the last day of the month for months with less than 31 days.
Page 273 Select the schedule and press Setting Holiday Ｓｃｈｅｄｕｌｅｄｅｔａｉｌ２００６／０８／０１Ｔｕｅ You can set a day or a day of the week as a holiday and １２：００２００６／０８／０１Ｔｕｅ cancel the holiday settings. A day set as a holiday is １２：５０ displayed in red. Sundays and holidays are set as default Ｌｕｎｃｈｍｅｅｔｉｎｇ...
Page 274: Performing Frequently Used Functions Quickly
Checking the Number of Schedules Recording Recipient’s or Your Saved Own Voice The number of schedules saved can be checked as well Your own voice during stand-by and the recipient’s voice as the number of schedules still available to be saved or during a voice call can be recorded.
Page 275: Checking The Call Duration And Charge
Resetting the Total Call Duration and Checking the Call Duration Charge and Charge The display of the total call duration and charge can be You can check the call duration and charge for the last reset. The count starts from 0 after the reset. and total voice and videophone calls.
Page 276: Using The Calculator
Enter the Security code and press (OK). Using the Calculator ＣａｌｌｃｏｓｔｌｉｍｉｔＳｅｔＯＦＦＬｉｍｉｔ The FOMA terminal has a calculator that can perform ０ＹＥＮ basic operations (addition, subtraction, multiplication, （１０−１０００００）Ｎｏｔｉｆｉｃａｔｉｏｎ and division). Ａｌａｒｍ＋Ｓｔａｎｄ−ｂｙ Example: Calculating 64×5 From the Menu, select [Tools] → [Calculator] and press Select [ON]/[OFF] for the Call limit notice at [Set].
Page 277: Displaying The Settings Of Various Functions
From the Menu, select [Settings] → [Application] and Displaying a Memo press Ａｐｐｌｉｃａｔｉｏｎ The contents of a saved memo can be checked. Ｍａｉｌｉ−ｍｏｄｅ From the Menu, select [Tools] → [Text memo] and ｐｐｌｉ press ＰｈｏｎｅｂｏｏｋＣａｌｌｒｅｃｏｒｄＴｅｘｔｍｅｍｏｌｉｓｔ１／５ＰｕｓｈＴａｌｋＣａｍｐｉｎｇｉｓｓｃｈｅｄｕＲｅｃｏｒｄｍｓｇ...
Page 278: Using The Switched Earphone Mic
Placing a Call Using i-mode Mail ● If a Phonebook memory number that is saved as Secret is set for the Memory number, set the Secret display to [ON] if you want to use the switch on the Earphone Mic to place You can easily place a voice or videophone call or a call.
Page 279: Receiving Answer Canswerll Automanswerticanswerlly With Eanswerrphone
Receiving a Call Automatically Deleting All Saved Data with Earphone You can delete saved data and reset the settings of each function to the default settings. For the functions to be You can set to automatically answer a voice or video- reset by the Delete all data, see the list of reset items phone call when the Flat-Plug Switched Earphone Mic (P.278) and the list of menus (P.296).
Page 280: List Of Reset Items
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Delete all data are as follows. For functions that can be accessed through the menu display, see the list of menus (P.296).
Page 281 Network Services This manual provides a brief description of each Network Service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the Network Services, see the “Network Services Operation Guide”. Also, see the “Multi Number Operation Guide” for information on the Multi Number Service.
Page 282: Available Network Services
From the Menu, select [NW Services] → [Voice Mail] Available Network Services and press Set each item. This manual provides a brief description of each Network Service using the approach of operating from the menu of Menu item Function/Operation the FOMA terminal. For detailed information on operation Activate [Activate] →...
Page 283: Using The Call Waiting Service
From the Menu, select [NW Services] → [Call Notes on the service for the videophone※ Forwarding] and press ● When the Voice Mail Service takes a videophone message for you, it is notified to you by SMS. Set each item. ●...
Page 284: Using The Caller Id Display Request Service
Set each item. Using the English Guidance Menu item Function/Operation Service Register Caller Save the phone number of the last received call. [Register Caller] → [Yes] → You can set English voice guidance to be played during Reg. selected No [Reg.
Page 285: Selecting An Operation For An Incoming Call During A Call
Selecting an Operation for an Using the Multi Number Service Incoming Call during a Call You can add up to two numbers, Additional No.1 and No.2, and use them along with your basic subscription You can use the Voice Mail or Call Forwarding Service, number.
Page 286: Saving A New Service To Use It
● Saving a New Service to Use It If you do not yet subscribe to the Multi Number Service, use the FOMA terminal with the Multi Number call set to [OFF]. You can save up to 10 services in the menu when a new ●...
Page 287 Data Communication For detailed information on Data Communications, see the “Manual for Data Communication” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Manual for Data Communication” (PDF format). If this software is not installed on your PC, download the latest version from the Adobe Systems Incorporated website.
Page 288 Precautions on Use About Data Communications Usage Fee of Internet Service Provider You can use the FOMA terminal for three types of data communications, packet communications, 64K data When you use the Internet, a usage fee is required for communications, and data transfer. your Internet service provider.
Page 289 ■ Definition of terms Access Authentication for the Use of a Browser ● Administrator An administrator is authorized access to all Windows XP and When a FirstPass-compatible site that you access through Windows 2000 Professional systems. At least one user with the Internet browser on your PC requires the FirstPass (user Administrator privilege is set for each PC.
Page 290 ■ Operating environment of communication configuration Preparations and Flow of Data files (drivers)/FOMA PC setup software Communications Item Required environment PC main unit※1 PC/AT-compatible OS※2 Windows 98, Windows Me, The preparations required for performing packet and 64K Windows 2000 Professional, data communications by connecting the FOMA terminal Windows XP (All Japanese versions) to a PC are given below.
Page 291 Entering Text About Entering Text ......................290 Entering Text ........................290 Entering Common Phrases ....................292 Entering Pictographs/Symbols ................... 292 Editing/Saving Common Phrases ............ <Edit common phrases> Quoting Data from the Phonebook, etc................292 Cutting/Copying/Pasting Text ....................293 Entering Text Using Kuten Codes ..............<Input kuten>...
Page 292: About Entering Text
■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here. ■ Deleting a character • Characters including JIS level 1 and level 2, 6,355 kanji are available.
Page 293 Press three times and press five times. Press ＩｎｐｕｔｔｅｘｔｍｅｍｏＩｎｐｕｔｔｅｘｔｍｅｍｏけんと検討けんと検討健闘剣道検討健闘見当拳闘見当県道ケント県とけんとうケントウ件と券と権と健とケントウ謙と憲と建と研と The characters “んと” are entered and the matching words The first conversion target word appears. list for “けんと” is displayed. To finalize this word To set the User conversion mode temporarily Press (Select).
Page 294: Entering Common Phrases
Press (OK). Entering Common Phrases The selected pictographs are entered all at once. For common phrases, see P.306. Editing/Saving Common Phrases • Common phrases that are available vary depending on the contents to be edited. Unavailable categories are disabled for selection.
Page 295: Cutting/Copying/Pasting Text
Pasting Text Cutting/Copying/Pasting Text Select the position to paste in the text input display The entered characters can be pasted to the other input and press (Func). display by cutting or copying. Use this function when The Function menu appears. you enter i-mode text or compose mail.
Page 296: Resetting To The Default Settings
Example: Saving a word in the Prediction dictionary Using the Downloaded Dictionary From the Menu, select [Settings] → [Application] → [Input method] → [Edit prediction] and press Up to 20 dictionaries can be downloaded using i-mode The Prediction dictionary display appears. for use with the FOMA terminal.
Page 297 Appendix/ External Device Interface/ Troubleshooting List of Menus ........................296 Characters Assigned to Keys ..................... 303 Special Symbols ......................... 304 Pictographs ......................... 304 Face Marks ......................... 305 Common Phrases ....................... 306 Preinstalled Images ......................307 Deco-mail Templates ......................308 Kuten Codes ........................309 Multiaccess Combinations ....................
Page 298: List Of Menus
List of Menus • You can enter the figure next to some menu names listed below in the menu display to execute the associated function. ■Normal mode ○: The default setting/s is/are restored. ●: Items deleted Reset Delete Menu Default Setting Page settings all data...
Page 299 Reset Delete Menu Default Setting Page settings all data − i-mode i Menu P.158 − ● Bookmark P.165 Screen Memo − ● P.168 Go to URL address − ● P.164 location URL list − ● P.164 − i-Channel P.235 − ●...
Page 300 Reset Delete Menu Default Setting Page settings all data − ●※5 Data box My picture P.244 − ●※5 i-motion P.247 Melody − ●※5 P.250 Chara-den − ●※5 P.250 My document − ●※5 P.263 ○ ○ Settings Display Stand-by Stand-by display Aqua Crystal P.109 ○...
Page 301 Reset Delete Menu Default Setting Page settings all data ○ ○ Settings Call Missed call P.113 ○ ○ Videophone Display setting Main-Other side P.76 Set outgoing image Camera image: ON, ○ ○ P.76 Substitute image: ブンブン（Dimo） Visual preference Normal ○...
Page 302 Reset Delete Menu Default Setting Page settings all data Settings Lock/ Lock all P.121 Security ○ ○ IC card lock P.242 Remote lock ○ ○ P.121 Monitoring 3min ○ ○ Times 5Count ○ ○ − ○ List PIM lock P.123 ○...
Page 303 Reset Delete Menu Default Setting Page settings all data − NW Services Voice Mail Activate P.280 − Set ring time Deactivate − Check setting − Play messages − − Voice Mail setting − Check messages ○ ○ Tone/Vibrate notice Delete VM icon −...
Page 304: Simple Mode
Reset Delete Menu Default Setting Page settings all data − NW Services English Guidance setting P.282 Guidance − Check setting Service ドコモ故障問合せ (Contact for Repair) − P.282 Numbers ドコモ総合案内・受付 (General Contact) − Additional Register USSD Service: Unsaved, USSD: − ○...
Page 305: Characters Assigned To Keys
Characters Assigned to Keys Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys アイウエオあいうえお . @ ／： − ∼ ぁぃぅぇぉァィゥェォか...
Page 306: Special Symbols
Special Symbols • Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■Full-width symbols ■Half-width symbols Pictographs • Pictographs are not displayed correctly when sending to i-mode non-compatible mobile phones or PCs. •...
Page 307: Face Marks
Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered. • Some face marks listed below may look different from the actual ones. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word...
Page 308: Common Phrases
Common Phrases Category Common phrase .co.jp .go.jp .ne.jp @docomo.ne.jp Internet http:// .com .or.jp https:// .ac.jp www. KAO MOJI1 KAO MOJI2 KAO MOJI3 おはようございますお疲れさまでしたおやすみなさいお世話になっております Greetings 昨日は、どうもありがとうございましたこんにちは行ってきますこんばんはいってらっしゃいよろしくお願い致します直行します本日の会議は中止となりました直帰します出欠をご連絡ください Business 休暇をとります次の指示を待ってください...
Page 309: Preinstalled Images
Preinstalled Images The following images are available on the FOMA terminal at the time of purchase. ■My picture ● Preinstalled WP＋ Logo （アニメ） ※ Aqua Crystal Crimson Ruby Resort Compass Chess Gaia Freeway ※ “WP＋ Logo （アニメ） ” changes in color and appearance according to the time of day, radio wave condition, and battery level.
Page 310: Deco-Mail Templates
● Deco-mail picture ©VOOZ ©BVIG ©BVIG ■i-motion ■My document ● Preinstalled ● Preinstalled ©VOOZ ©BVIG Deco-mail Templates ありがとうごめんなさい Happy Birthday! げんき？ ©VOOZ ©BVIG ©VOOZ ©BVIG ©VOOZ ©BVIG 飲み会のお誘いあのね Thank You!! Good Night ブンブンカフェブンブンおひるねブンブンフラワー ©BVIG ©BVIG ©BVIG...
Page 311: Kuten Codes
Kuten Codes In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).
Page 315: Multiaccess Combinations
Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress. • The FOMA terminal may not operate as indicated in the table below depending on its condition. Another event or task Voice V.phone i-mode 64K data...
Page 316: Multitask Combinations
Multitask Combinations The table below indicates whether another function is available for each function in the menu. • The FOMA terminal may not operate as indicated in the table below depending on the status of each function. • The functions marked with ■...
Page 317: Services Available On The Foma Terminal
※1 For the multitask combination to the Receive option, see the following functions. Recv option setting is [ON] : See “Display site” or “Dur display site”. Recv option setting is [OFF] : See “Mail setting”. ※2 Besides the function for displaying a site, functions for displaying the screen memo, Message R/F, and i-Channel are included.
Page 318: Optional And Related Devices
Optional and Related Devices A variety of commercially available optional devices allows you to expand the FOMA terminal’s capabilities by supporting a wide range of applications, including personal and business uses. Some accessories are only available in some areas. For details, please contact our service counter (DoCoMo shop, etc.).
Page 319: Introduction Of Data Link Software
Introduction of Data Link Software You can use “FOMA SO Series Data Link Software” to transfer data such as the Phonebook, mail, Bookmark, and Schedule data between the FOMA terminal and a PC. Use the FOMA USB connection cable (optional) to connect the FOMA terminal with a PC or use the “Memory Stick Duo”.
Page 320: Introduction Of Movie Player Software
Introduction of Movie Player Software To play back a movie (MP4 format file) on a PC, you need QuickTime Player (free) ver.6.4 or later (or ver.6.3+3GPP) from Apple Computer, Inc. You can download QuickTime from the following website. http://www.apple.com/jp/quicktime/download/ • To download this software, you need a PC connected to the Internet. A separate communications charge is also required for downloading.
Page 321: Troubleshooting
Troubleshooting First, check whether the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.329). Trouble Cause and Remedy Cannot power on the FOMA terminal. • Check if the battery pack is attached properly (P.37). (The FOMA terminal cannot be used.) •...
Page 322 Trouble Cause and Remedy An image other than that you set is displayed • If multiple images are set for the incoming image for voice/ for an incoming call. videophone call, the image is displayed in the following order of priority (P.92, 96, 103). 1.
Page 323: Error Messages
Error Messages • In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Cannot execute because of memory Cannot support content shortage • Data that is not supported by the Another function is active.
Page 324 Connection failed (562) Data in IC-card is full. Unable to download. Delete some software? • Failed to connect to the i-mode center. Move to a location with • This message appears if there is Final number exists better radio wave condition and not enough memory available in •...
Page 325 • Failed to connect to i-mode for Mail folders for this software is used. some reason. Retry to connect Unable to delete (P.159). • Failed to delete the i-αppli with No content is available (204) mail software because the corre- •...
Page 326 No space in group of PushTalk Receiving data exceeds replayable phonebook size for i-motion • The number of groups saved in Other function is running. Cannot set • Failed to retrieve the data be- the PushTalk phonebook has cause its volume has exceeded •...
Page 327 Run software and delete data on IC Software failed This data can no longer be replayed card. Then delete software • Failed to start the software be- • This movie/i-motion is provided • Failed to delete an Osaifu-Keitai- cause it cannot be checked by with a limitation on the number of compatible i-αppli software be- the server.
Page 328 This UIM cannot be recognized URL address changed (301) • Make sure that the correct UIM is • The site has moved and no longer inserted (P.35). UIM is full uses this URL. • The UIM contains an error. Con- •...
Page 329: Warranty And After Sales Services
Warranty and After Sales Services Warranty ● Make sure that the warranty is received with the FOMA terminal upon purchase. Check to be sure that the name of the retailer, date of purchase, and other items have been filled out on the warranty before storing it in a safe place.
Page 330 ◎Precautions ● Never modify the FOMA terminal or accessories. • Doing so may result in fire, injuries or malfunctions. • The technical standards of the FOMA terminal and UIM are stipulated by law and standards to prevent radio interference and network malfunctions. FOMA terminals or UIM that do not satisfy the technical standards must not be used.
Page 331: Updating The Software
Updating the Software This function allows you to check whether the software update is necessary for the FOMA terminal and if necessary, download a part of the software using packet communications to update the software. ※ No packet communications charge is required for updating software. If the software update is necessary, we inform of it on DoCoMo’s home page and in “お知ら...
Page 332 From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). • The Security code is masked by “ ”. • The Security code is set to “0000” at the time of purchase. Confirm the messages.
Page 333 Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press then press (OK). ＳＷＵｐｄａｔｅＲｅａｄｙｔｏＤｏｗｎｌｏａｄｉｎｇｄｏｗｎｌｏａｄ？Ｎｏｔｉｃｅ：ＣｏｎｎｅｃｔｉｎｇＮｏｆｕｎｃｔｉｏｎｓａｒｅａｖａｉｌａｂｌｅｅｘｃｅｐｔｒｅｃｅｉｖｅｃａｌｌｓ After a while, the software download starts. • When downloading starts, step 2 and step 3 are performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
Page 334 Reserving a Date/Time for the Software Update (Reserve) If downloading takes too long or the server is congested, you can connect to the server and preset a date/time to start the software update. Example: Reserving the software update on August 11 (Fri) 1:05 a.m. From the screen for selecting the update type, select [Reserve] and press The FOMA terminal connects to the server and displays a list of reservation Ｌｉｓｔｏｆｃｈｏｉｃｅ...
Page 335: Protecting Your Mobile Phone From Harmful Data
Confirming the Reservation From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). If the software update is already reserved, the reserved information appears. Ａｌｒｅａｄｙｒｅｓｅｒｖｅｄ To change the reservation ｆｏｒ...
Page 336 Updating the Pattern Definitions From the Menu, select [Settings] → [Management] → [Scan function] → [Update] and press Ｕｐｄａｔｅｐａｔｔｅｒｎｄｅｆｉｎｉｔｉｏｎｓ？ＹｅｓＮｏ Select [Yes] → [Yes] and press ＵｐｄａｔｅＲｅａｄｙｔｏＤｏｗｎｌｏａｄｉｎｇｓｅｎｄｙｏｕｒｔｅｒｍｉｎａｌＩＤ？ＹｅｓＮｏ When the pattern definitions are the latest available There is no need to update the pattern definitions.
Page 337 ● If the Auto-update setting is set to [Valid], “ ” (Update completed) appears in the stand-by display when the pattern definitions update is completed. If the pattern definitions were not updated successfully, “ ” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification. ●...
Page 338: Sar Certification Information
MIC: http://www.soumu.go.jp/english/index.html TELEC: http://www.telec.or.jp/ENG/index_e.htm NTT DoCoMo: http://www.nttdocomo.co.jp/ (Japanese only) Sony Ericsson Mobile Communications Japan, Inc.: http://www.SonyEricsson.co.jp/product/SAR/ (Japanese only) Ministry of Internal Affairs and Communications The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment.
Page 339 Index/Quick Manual Index ........................... 338 Quick Manual ........................349...
Page 340 Index Move ........166 Shutter sound ...... 147 Use ........165 Switch camera ..... 141 AC adapter ......... 39 White balance ...... 145 Acpt/Rjct call ......127 Certificates ....159, 180, 226 Active holder ......41 Change mail address ....188 Additional service .....
Page 341 My picture ......244 Earphone setting ..106, 276, 277 Data communications ....286 Earphone SW ......276 AT commands ...... 288 Easy search ......... 4 i Menu ........158 i αppli history ......232 Definition of terms ....287 Edit movie ........
Page 342 Use phone info ....176 Save insert img ....207 Bar code reader ....232 Use sites ......160 Save to M.S......254 Camera function ....232 User certificate ....180 Secret code ....92, 188 Certificates ......226 Word translate .....
Page 343: On Hold While Receiving A Call
List of menus ......296 Menu setting ......113 Property ....... 258, 263 List of reset items ..... 278, 296 Message Save ........263 Lock all ........121 Auto-display ......177 Save to M.S......254 Lock key ......29, 125 Check new messages ..
Page 344 Optional and related devices Save to M.S......254 Delete ........86 ..........316 Search ........98 Group setting ......84 Osaifu-Keitai ......238 Secret display ...... 126 NW connection ...... 87 IC card lock ......242 Select phone Illum... 93, 96 Originate ........
Page 345 Ring tone Select conversion ..... 291 Cut ........293 Additional No....... 283 Select theme ......112 Delete ........290 Call ........102 Self mode ......... 123 Dictionaries ......294 Des mail tone ....93, 96 Sent mail ........208 Edit common phrases ..
Page 346 Copy to UIM ......255 Record message ....65 Insert/Remove ....... 35 Redial record ......51 PIN1/PIN2 code ....117 V.ph switch notice ....78 UIM setting ......118 Whisper mode ....... 61 UIM phonebook ......90 Voice Mail Service ....280 Save ........
Page 347 MEMO...
Page 348 MEMO...
Page 349 MEMO...
Page 350 Quick Manual Using Quick Manual The Quick Manual on the following pages provides convenient reference. Cut and fold these pages into a booklet and take it with you. ■Cutting the pages Cut the pages along the printed line ( ■Folding the cut pages Fold the pages you cut off along the printed line ( ) as shown in the illustrations below.
Page 355 Don’t forget your FOMA terminal or your manners! When you use the FOMA terminal, be careful not to disturb others around you. Set the Public mode in the following cases ●When you are driving Using the FOMA terminal while driving is dangerous because it may interfere safe driving. ※...
Page 356 NTT DoCoMo Shikoku, Inc. NTT DoCoMo Kyushu, Inc. Manufacturer: Sony Ericsson Mobile Communications Japan, Inc. Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment. Li-ion Printed with soybean oil ink.
Page 357 SO902iWP + FOMA ® Manual for Data Communication About Data Communications ............1 Preparations and Flow of Data Communications ......3 Connecting the FOMA Terminal to a PC ........4 Installing the Communication Configuration Files (Drivers) ..4 Setting Communications Using the FOMA PC Setup Software ..7 Setting Communications Without the FOMA PC Setup Software ..
Page 358: About Data Communications
Precautions on Use About Data Communications Usage Fee of Internet Service Provider You can use the FOMA terminal for three types of data communications, packet communications, 64K data When you use the Internet, a usage fee is required for communications, and data transfer. your Internet service provider.
Page 359 ■ Definition of terms Access Authentication for the Use of a Browser ● Administrator An administrator is authorized access to all Windows XP and When a FirstPass-compatible site that you access through Windows 2000 Professional systems. At least one user with the Internet browser on your PC requires the FirstPass (user Administrator privilege is set for each PC.
Page 360: Preparations And Flow Of Data Communications
■ Operating environment of communication configuration Preparations and Flow of Data files (drivers)/FOMA PC setup software Communications Item Required environment PC main unit※1 PC/AT-compatible OS※2 Windows 98, Windows Me, The preparations required for performing packet and 64K Windows 2000 Professional, data communications by connecting the FOMA terminal Windows XP (All Japanese versions) to a PC are given below.
Page 361: Connecting The Foma Terminal To A Pc
Installing the Communication Connecting the FOMA Terminal Configuration Files (Drivers) to a PC Connect the FOMA terminal to a PC when they are To connect the FOMA terminal to a PC using the FOMA powered on. USB connection cable (optional) and perform data communications, install the communication configuration Open the external connection terminal cover.
Page 362 When Using Windows 2000 Professional When Using Windows Me A user with Administrator privilege can install the software. Set “FOMA SO902iWP＋ CD-ROM” in the CD-ROM drive of the PC. Set “FOMA SO902iWP＋ CD-ROM” in the CD-ROM drive of the PC. Connect the FOMA terminal to the PC using the FOMA USB connection cable.
Page 363 When Using Windows 98 Checking the Installed Communication Configuration Files (Drivers) Set “FOMA SO902iWP＋ CD-ROM” in the CD-ROM drive of the PC. Confirm that the SO902iWP＋ communication configu- Connect the FOMA terminal to the PC using the FOMA ration files (drivers) are installed properly. USB connection cable.
Page 364: Setting Communications Using The Foma Pc Setup Software
Check the name of the program to be deleted and Installing the FOMA PC Setup click [はい]. Software The uninstallation of the communication configuration files (drivers) starts. To use the FOMA PC setup software, install it from this Click [OK]. CD-ROM.
Page 365 [変更と削除]. When using Windows 2000 Professional, Windows Me, or When using Windows 2000 Professional Windows 98 Select [NTT DoCoMo FOMA PC設定ソフト] and click [変 Click [スタート] → [プログラム] → [FOMA PC設定ソフト]. 更/削除]. When using Windows Me or Windows 98 Select [NTT DoCoMo FOMA PC設定ソフト] and click [追...
Page 366 When Using Other Providers Easy Setup (Packet Communications) Start the FOMA PC setup software and click [かんた When Using “mopera U” or “mopera” ん設定]. Start the FOMA PC setup software and click [かんた Select [パケット通信] and click [次へ]. ん設定]. Select [その他] and click [次へ]. Select [パケット通信] and click [次へ].
Page 367 Set [ユーザー名] and [パスワード] and click [次へ]. Enter a host name (any name) at [接続名] and click [次へ]. To set [ユーザー名] and [パスワード], enter the various information supplied by your service provider accurately, in • You cannot enter half-width characters, “¥” “/” “:” “＊” “?” particular, uppercase and lowercase letters.
Page 368 Click [詳細情報の設定]. Enter [ユーザー名] and [パスワード], and click [ダイヤル]. The configuration windows for [IPアドレス] and [ネームサーバー] appears. • You can connect with [ユーザー名] and [パスワード] left If dial-up information for the provider you subscribe to or in- blank when using “mopera U” or “mopera”. house LAN is required, enter the appropriate address and The connection is established.
Page 369 W-TCP Setting Host (APN) Setting The W-TCP setup software is a “TCP parameter setting” You can set a host (APN) for packet communications. tool for optimizing the transmission capacity of TCP/IP Connect the FOMA terminal to a PC before starting this when you perform packet communications using the operation.
Page 370: Setting Communications Without The Foma Pc Setup Software
Enter a dummy (nonexistent) phone number (such as Setting Communications Without “0”) at [電話番号], select [FOMA SO902iWP＋] at [接 the FOMA PC Setup Software 続方法], and click [OK]. The connection window appears. The procedure for setting packet or 64K data communi- cations without using the FOMA PC setup software is given below.
Page 371 Enter any name at [ISP名] and click [次へ]. Setting ON/OFF for the Notify Caller ID The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your caller ID. • The caller ID must be notified when you use “mopera U” or “mopera”.
Page 372 Check each item of the [全般] tab. When Using Windows 2000 Professional • When multiple modems are connected to a PC, put a checkmark only for [モデム - FOMA SO902iWP＋] at [接続 Click [スタート] → [プログラム] → [アクセサリ] → 方法]. [通信] →...
Page 373 Click the [アドレス] tab and set each item as shown Click the [ネットワーク] tab, check each item, and in the display example. click [設定]. • Select [PPP:Windows 95/98/NT4/2000, Internet] for [呼び出すダイヤルアップサーバーの種類]. • Put a checkmark only for [インターネットプロトコル (TCP/ IP)] for component.
Page 374 Click the [ネットワーク] tab and set each item as When using Windows Me/Windows 98 shown in the display example. • Set [ダイヤルアップサーバーの種類], [詳細オプション], Example: When using Windows Me and [使用できるネットワークプロトコル] as instructed by Click [スタート] → [プログラム] → [アクセサリ] → your Internet service provider or network administrator.
Page 375: At Commands
Performing the Dial-up Connection AT Commands Connect the FOMA terminal to a PC before starting this AT commands are the commands (instructions) for setting operation. and changing the functions of the FOMA terminal on a Example: When using Windows XP Click [スタート] →...
Page 376: At Command List
AT Command List AT commands that can be used for FOMA SO902iWP＋ are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value. Command Outline/Parameter Input example...
Page 377 Command Outline/Parameter Input example AT+CGDCONT=[<cid>[,“PPP”[,“<APN>”]]] Sets a host (APN) during outgoing packet transmission. AT+CGDCONT=2,“PPP”,“abc” AT+CGDCONT= ※1 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGDCONT=<cid> ※2 packet communications AT+CGDCONT? APN=Arbitrary Host-specific arbitrary character string that indicates a host AT+CGDCONT=? AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of...
Page 378 Disconnects packet or 64K data communications. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communications.
Page 379 Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
Page 380 List of Reasons for Disconnection Result Codes ■ Packet communications The result code is displayed in the text indication format (initial value) when the ATVn command is set to n=1 (P.22), Value Reason while the result code is displayed in the numeric value An APN is not found or is incorrect.
Page 381 ■ Communications protocol result codes Numeric value Text indication Description indication PPPoverUD 64K data communications connection PACKET Packet communications connection ■ Example of result code indication ● When ATX0 is set When the connection is completed, only “CONNECT” is displayed regardless of the AT¥V command setting (P.21). Text indication example Numeric value indication example ATD＊99＊＊＊3#...

NTT docomo FOMA SO902iWP+ User Manual

Table of Contents

Before Using the Foma Terminal

Placing/Receiving Videophone Calls

Pushtalk

Phonebook

Sound/Display/ Light Settings

Security Settings

Camera

Table of Contents

I-Αppli

Osaifu-Keitai/Toruca

Displaying/Editing/ Managing Data

Other Useful Functions

Network Services

Entering Text

Appendix/ External Device Interface/ Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for NTT docomo FOMA SO902iWP+

Summary of Contents for NTT docomo FOMA SO902iWP+