Selecting the Image Sent to the Other Party
i
"Video-phone"
1
The "Video-phone settings screen" appears.
Select any item:
2
Visual
preference......Sets the visual preference for videophone call.
Normal
Prefer img
Prefer motion
image......"Setting the image sent during videophone calls" → P.91
Select
Voice call auto
switch......Sets the operation performed when a videophone call fails to connect.
ON......If a videophone call cannot be connected, it is automatically switched to a voice call.
OFF
(default) ......A message is displayed notifying that you could not connect to a videophone call, and
the display returns to the standby screen.
observation......"Setting Remote Observation" → P.96
Remote
Main
display......"Setting the Image Displayed on the main display" → P.93
V-phone......"Setting for Switching between Voice Call and Videophone Call" → P.94
Indicate
switch......"Setting the Hands-free Operation for Videophone Calls" → P.94
Hands-free
● Setting the image sent during videophone calls
Default setting
On hold, Holding: Pre-installed Substitutive image: Chara-den (Dimo)
Record message, Preparing, Voice memo: Pre-installed
You can select the image sent instead of the camera image.
● The images that can be set using this function is the JPEG or GIF image that is VGA size (640 dots wide × 480 dots
high) or smaller. However, if the selected image is larger than Mail (L) (176 dots wide x 144 dots high), it is trimmed
to the same aspect ratio as Mail (L) and reduced to Mail (L).
● The setting in this function is still retained after the videophone call ends.
Video-phone settings screen (P.91) "Select image" Select any item:
1
On
hold......Sets the image sent for a call on answer hold.
Holding......Sets the image sent while holding a call.
Substitutive
image......Sets the image sent as a substitute image.
Record
message......Sets the image sent while recording the record message.
Preparing......Sets the image sent during preparation for the record message.
Voice
memo......Sets the image sent while recording the voice memo.
(default)......Standard setting for both quality and movement.
qual......Sends more finely detailed video images. Best for motionless subjects.
spd......Sends video images with smooth movement. Best for fast-moving subjects.
Video−phone
Visual preference
Select image
Voice call auto switch
Remote observation
Main display
Indicate V−phone
Hands−free switch
Video-phone settings
Continued on next page
Normal
Select
91