NTT docomo FOMA N702iS Manual page 57

Phone number input screen
Phone number input screen (P.54, 85) p(FUNC) Select any item:
1
Notify caller ID......"Selecting to Notify/Withhold Your Caller ID when Making a Call" → P.62
Prefix numbers......"Making a Call with the Prefix Numbers" → P.65
dial......"Making an International Call with the International Dial Function" → P.58
International
number......"Multi number" → P.335
Multi
Add to phonebook......"Adding Information to the Phonebook" → P.101
Compose message......"Composing and Sending i-mode Mail" → P.210
Dialing speed......Selects the connection speed used for making videophone calls from "64K/32K".
Select image......Selects the image used during a videophone call from "Me/Chara-den".
Select "Release" to cancel the setting.
N
The "Dialing speed" setting is applied to only one (dialed) call. The dialing speed is not stored in the Redial or Dialed calls records.
Also, if you make a voice call after setting the "Dialing speed", the setting is ignored.
In-call screen
In-call screen (P.54) p(FUNC) Select any item:
1
Speed photo mail......"Sending an image you shot during a call" → P.213
Disp photo mail......Displays received speed photo mail.
message......Performs "Check new message". → P.199, 225
Check new
Putting the current call on hold <Holding>
During a call t
1
［Ｏｎ ｈｏｌｄ］
１ｍ３０ｓ
ＤｏｃｏｍｏＴａｒｏ
Ａｎｓｗｅｒ
Press t, r or d(Answer) to resume the call
2
N
Call charges still apply while a call is on hold.
Use "Call response setting" to select the tone used while holding a call.
During the held call, you will also hear the on-hold tone. However, you will not hear the on-hold tone when "Phone" of "Ring volume" is
set to "Silent" or the FOMA terminal is in Manner mode. (When "Manner mode" is set to "Original" and "Phone vol." for the original
manner mode is not set to "Silent", you will hear the on-hold tone.)
The other party hears the on-hold tone.
■ To end the held call
y
■ If the held party hangs up
The call ends.
55