Executing Set Data Communication - NTT docomo FOMA N702iS Manual

Select the user
5
When " すべてのユーザー " (All users) is
selected, the connection setting is applied to all
the users registered in Windows.
Specify a user name and
6
password and click "次へ" (Next)
When setting the user name and password,
input the correct, case-sensitive data provided
by the service provider.
Check the setting information
7
and click " 完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "戻る " (Back).
Click "OK"
8
Execute communication.→ p.24

Executing Set Data Communication

Double-click the connection icon on the desktop
1
If the connection icon does not appear on the desktop, use the following procedure:
Windows 2000
Open " スタート " (Start) → " プログラム " (Programs) → " アクセサリ " (Accessories) → " 通信 "
(Communication) → " ネットワークとダイヤルアップ接続 " (Network and dialup connection) →
Open the access point
Windows XP
Open "スタート" (Start) → "すべてのプログラム" (All Programs) → "アクセサリ" (Accessories) →
" 通信 " (Communication) → " ネットワーク接続 " (Network connection) → Open the access point
24