Selecting The Menu - NTT docomo FOMA N702iS Manual

Selecting the Menu

You can run, set, and check the FOMA terminal's functions in a variety of ways. Mainly you can either select a
function from the main menu or access the function by pressing the keys for the menu numbers. You can also
use the software keys (P.34) or keys assigned for specific functions. Furthermore, you can add frequently used
functions to "Original menu" to run them quickly.
Selecting functions from the main menu
The functions of the FOMA terminal are sorted by function (P.358), and you can select these functions from the
main menu displayed by pressing i in the standby screen.
<Example: Setting the flashing of "Illumination in talk">
Press i on the standby screen to display the main menu
1
Standby screen
i
■ If you do not press any keys for 15 seconds while the main menu is displayed
The main menu is turned off and returns to the previous screen.
Use b to move the highlight, then press d (Select) to select the dis-
2
played menu sequentially
Ｓｅｌｅｃｔ
Ｔａｌｋ
Ｎｏｉｓｅ ｒｅｄｕｃｔｉｏｎ
ＯＮ
Ｑｕａｌｉｔｙ ａｌａｒｍ
Ｒｅｃｏｎｎｅｃｔ ｃｏｎｔｒｏｌ
Ｉｌｌｕｍｉｎａｔｉｏｎ ｉｎ ｔａｌｋ
(3 times)
Ｃａｌｌ ｒｅｓｐｏｎｓｅ ｓｅｔｔｉｎｇ
Ａｕｔｏ ｄｉａｌ ｓｅｔｔｉｎｇ
Ｓｅｌｅｃｔ
32
Main menu
Ｓｅｌｅｃｔ
h d
Ｓｅｌｅｃｔ
Ｔａｌｋ
Ｎｏｉｓｅ ｒｅｄｕｃｔｉｏｎ
Ｑｕａｌｉｔｙ ａｌａｒｍ
g Ｒｅｃｏｎｎｅｃｔ ｃｏｎｔｒｏｌ
Ｉｌｌｕｍｉｎａｔｉｏｎ ｉｎ ｔａｌｋ
d
ＯＦＦ
Ｃａｌｌ ｒｅｓｐｏｎｓｅ ｓｅｔｔｉｎｇ
Ａｕｔｏ ｄｉａｌ ｓｅｔｔｉｎｇ
Ｓｅｌｅｃｔ
The highlighted item is
displayed in two lines and
the current setting is
displayed.
Guidance
You can set not to display the
guidance in "Menu display set".
→ P.125
Ｓｅｔｔｉｎｇｓ １／２
Ｉｎｃｏｍｉｎｇ ｃａｌｌ
Ｔａｌｋ
Ｖｉｄｅｏ−ｐｈｏｎｅ
Ｄｉｓｐｌａｙ
g
Ｃａｌｌ ｔｉｍｅ／Ｃｈａｒｇｅ
Ｃｌｏｃｋ
Ｌｏｃｋ／Ｓｅｃｕｒｉｔｙ
Ｃｏｎｎｅｃｔｉｏｎ ｓｅｔｔｉｎｇ
ｐｐｌｉ ｓｅｔｔｉｎｇｓ
Ｅｘｔｅｒｎａｌ ｃｏｎｎｅｃｔｉｏｎ
Ｓｅｌｅｃｔ
Ｉｌｌｍ． ｉｎ ｔａｌｋ
ＯＦＦ
Ｐａｔｔｅｒｎ １
Ｐａｔｔｅｒｎ ２
Ｐａｔｔｅｒｎ ３
Ｓｅｌｅｃｔ
Tip
Ｓｅｔｔｉｎｇｓ １／２
Ｉｎｃｏｍｉｎｇ ｃａｌｌ
Ｔａｌｋ
Ｖｉｄｅｏ−ｐｈｏｎｅ
Ｄｉｓｐｌａｙ
d
Ｃａｌｌ ｔｉｍｅ／Ｃｈａｒｇｅ
Ｃｌｏｃｋ
Ｌｏｃｋ／Ｓｅｃｕｒｉｔｙ
Ｃｏｎｎｅｃｔｉｏｎ ｓｅｔｔｉｎｇ
ｐｐｌｉ ｓｅｔｔｉｎｇｓ
Ｅｘｔｅｒｎａｌ ｃｏｎｎｅｃｔｉｏｎ
Ｓｅｌｅｃｔ
Tip
Holding down b moves the
highlight in sequence.