NTT docomo FOMA SO905i 07.11 User Manual

Table of Contents

Quick Links

Download this manual

Easy Search/Contents/

Precautions

Before Using the

Handset

Voice/

Videophone Calls

PushTalk

Manual for

Phonebook

Sound/Display/

Light Settings

'07.11

Security Settings

Camera

i-mode/i-motion/

i-Channel

Mail

i-αppli

Osaifu-Keitai/

ToruCa

GPS Function

One Seg

Full Browser

Data Display/Edit/

Management

Music&Video Channel/

Music Playback

Other Convenient Functions

Character Entry

Network Services

PC Connection

Overseas Use

Appendix/External Devices/

Troubleshooting

Index/

Quick Manual

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the FOMA SO905i 07.11 and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo FOMA SO905i 07.11

Page 1 Easy Search/Contents/ Precautions Before Using the Handset Voice/ Videophone Calls PushTalk Manual for Phonebook Sound/Display/ Light Settings ’07.11 Security Settings Camera i-mode/i-motion/ i-Channel Mail i-αppli Osaifu-Keitai/ ToruCa GPS Function One Seg Full Browser Data Display/Edit/ Management Music&Video Channel/ Music Playback Other Convenient Functions Character Entry Network Services...
Page 2 In this case, you cannot operate the FOMA terminal as explained in this manual, so please change the menu to the Standard menu or reset the menu settings (P.35, 116). The latest information on this manual is ready for download at the NTT DoCoMo’s website.  “User’s Manual Download”...
Page 3 Information on Using the Manual and How to Look up in the Manual This manual guides you through the operating instructions with step-by-step screen examples for each operating procedure to ensure that you operate the FOMA terminal properly. ■ How to Look up in the Manual This manual employs several search methods so that it can provide the most appropriate way to find a page relating to your desired function or service flexibly according to your need or situation.
Page 4: Before Using Data Communication
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.418) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. P.44 eo Channel ....
Page 5 ■ Typical layout of the operating instructions page Function name Notifying the Recipient of Your Phone Number Section title <Notify caller ID> Index When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives of phone you are calling.
Page 6 Easy Search You can search the function that you want to know with simple words. Useful Functions for a Call your phone number Sending or keeping it anonymous ..Notify caller ID (P.44) Switching to videophone during a voice call ....Chg. to videophone (P.52) on hold Putting a current call ...........Holding (P.66)
Page 7 Useful Functions for the Camera recording size Changing the ..........Select size (P.147) photo light Turning on the ..........Photo light (P.148) microSD Saving an image directly to the memory card ..............Select save to (P.153) Displaying image a recorded ........My picture (P.266) For Secure Operations of the FOMA Terminal Locking the FOMA terminal from a remote...
Page 8: Table Of Contents
Before using the FOMA terminal Information on Using the Manual and How to Look up in the Manual ...............1 Easy Search ..............4 Contents Main Functions of the FOMA SO905i .......8 Making Full Use of SO905i ! ...........10 Safety Precautions (Observe Strictly) ......12 Handling Precautions ............18 Intellectual Property Right ..........20 Supplied and Optional Accessories ........22...
Page 9: Functions
i- α ppli What is i-αppli?, Download, Run i-αppli, Auto-start, i-αppli stand-by, Manage i-αppli, and so on... Osaifu-Keitai/ToruCa What is Osaifu-Keitai?, Start an Osaifu-Keitai-compatible i-αppli, What is ToruCa?, Obtain a ToruCa card, Display ToruCa, Manage ToruCa cards, ToruCa setting, IC act. notice, IC card lock, and so on... GPS Function Position location, Location provision, Location notice, Location history, and so on…...
Page 10: Main Functions Of The Foma So905I
Main Functions of the FOMA SO905i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11: Camera Function
Camera Function High-Definition Wide VGA Liquid-Crystal You can record still images and movies using two cameras, Screen Display Out- and In-camera. This FOMA terminal has a wide range A 3-inch high-resolution full wide liquid-crystal screen of installed camera functions including a scene selection display is employed as the main display.
Page 12: Making Full Use Of So905I
Making Full Use of SO905i ! Videophone You can have a face-to-face conversation with a person in the distance. You can hear the person’s voice from the speaker without changing any settings, so you can start a conversation Image of a soon.
Page 13 2in1 A mode B mode 2in1 is a service that allows you to Phone No. : 090-AAAA-AAAA Phone No. : 090-BBBB-BBBB use two phone numbers, two mail Address : XXA@docomo.ne.jp Address : XXB@docomo.ne.jp addresses, and special mode functions Phonebook : For A mode Phonebook : For B mode to make one mobile phone work like using two mobile phones separately.
Page 14: Safety Precautions (Observe Strictly)
■ “Safety Precautions” are described in the following Safety Precautions (Observe categories: Strictly) Handling the FOMA Terminal, Battery Pack, Adapter (including the charger), and UIM ..12 Handling the FOMA Terminal ............ 14 For safe and proper use of the FOMA terminal, please Handling the Battery Pack............
Page 15 WARNING CAUTION Do not place the FOMA terminal, battery Do not place on an unstable or inclined pack, adapter (including the charger), platform. or UIM inside cooking appliance such Doing so may cause the device to fall Don’t Don’t as a microwave oven or high-pressure and cause injury or malfunction.
Page 16 Power off the FOMA terminal in a place Handling the FOMA Terminal where the use is prohibited such as in airplane or hospital. WARNING Failure to do so may affect electronic equipment and electronic medical D o n o t a i m t h e i n f r a r e d d a t a p o r t equipment.
Page 17 Be careful about broken glasses or If the display is mistakenly damaged and exposed internal from the FOMA terminal when the liquid crystal is broken, do not if the display or the camera lens is broken. drink, absorb, or get it on your skin. Don’t If the liquid crystal gets on your eye or The display and the camera lens are...
Page 18 Be careful about your pet not to bite the Handling the Battery Pack battery pack. ■ Check the type of the battery by the label on the Failure to do so may cause the battery battery pack. pack to leak, overheat, explode, or catch fire, or cause the device to malfunction or Display Type of Battery...
Page 19 The DC adapter is for use in vehicles Clean dust from the power plug. with a negative ground. Do not use it in Failure to do so may cause fire. vehicles with a positive ground. Don’t Doing so may cause fire. When you connect the AC adapter to the power outlet, make sure that it does not Do not touch the FOMA terminal and...
Page 20: Handling Precautions
WARNING Handling Precautions Please observe the following guidelines in ◆ Common Precautions medical facilities. ● Do not expose to water.  Do not take the FOMA terminal into the  The FOMA terminal, battery pack, adapter (including the operating rooms, ICU (Intensive Care charger), and UIM are not waterproof.
Page 21 ● Using the FOMA terminal near ordinary phone, ◆ Battery Pack Precautions television or radio may cause interference in these ● The battery pack is a consumable accessory. electric appliances. Make sure to move far away from  Even if the operating time of the FOMA terminal varies them when using the FOMA terminal.
Page 22: Intellectual Property Right
“FOMA” logo, “i-mode” logo, “i-αppli” logo, “DCMX” logo, exists near the FOMA terminal. “iD” logo, “WORLD WING” logo, and “HIGH SPEED” logo are trademarks or registered trademarks of NTT DoCoMo. ◆ Caution  “Catch Phone (Call waiting service)” is a registered trademark of Nippon Telegraph and Telephone Corporation.
Page 23  QuickTime is a registered trademark of Apple Inc., in the U.S.  GestureTek technology is installed in this product. and other countries. Copyright © 2007, Gesture Tek, Inc. All rights reserved.  Powered by JBlend™ Copyright 2002-2007 Aplix  C o n t e n t o w n e r s u s e W i n d o w s M e d i a d i g i t a l r i g h t s Corporation.
Page 24: Supplied And Optional Accessories
Supplied and Optional Accessories ■ Supplied accessories FOMA SO905i Manual for FOMA SO905i (this manual) (w/warranty and back cover SO08) (w/Quick Manual P.426) FOMA SO905i CD-ROM (“Manual for PC connection setting” (PDF format) and “Kuten Code List” (PDF format) are included) ■...
Page 25 Before Using the Handset Part Names and Functions ....................24 About the Style ........................27 Using the Displays ....................... 30 About the Sub-display ......................33 Selecting the Menu ......................34 Using the UIM ........................36 Attaching and Removing the Battery Pack ................38 Charging the FOMA Terminal ....................
Page 26: Part Names And Functions
Part Names and Functions                                     ...
Page 27  Keypad  Music Touch Key Enter phone numbers or text (P.382). Operates the MUSIC Player or Music&Video Channel while the In the stand-by display, press for over a second to display FOMA terminal is folded (P.26).  Back Cover the Reset display (P.334).
Page 28 +JOG (Plus JOG) Symbols in Operation Description this manual Move the cursor upward. Press for over a second to Up arrow move the cursor continuously. Press in the stand-by display to display the Data Box. Move the cursor downward. Press for over a second to Down move the cursor continuously.
Page 29: About The Style
■ Usage precautions  To prevent from causing malfunction, do not stick any seals on the Touch Key.  The Touch Key only works when you pat it with your bare fingers. Use it after removing anything such as gloves from your fingers. ...
Page 30 ■ Switching to TV style Hold the FOMA terminal and Rotate the display 180 degrees Fold the FOMA terminal. open the display straight. clockwise. Cautions when rotating the display  When you rotate the display, be careful not to touch the corner of the display to the keys or body. Moreover, you cannot rotate the display counterclockwise or over 180 degrees.
Page 31 How to Use the 2 Step 1Seg Stand You can enjoy One Seg with two angles by placing the FOMA terminal horizontally in the TV style. ■ How to place the 2 Step 1Seg Stand Catch the dint portion with your finger and lift it Lift it until it stops.
Page 32: Using The Displays
Using the Displays  For details on the icons in the Camera mode or while watching One Seg, see P.141 or P.243 respectively.  The position of the clock in the main display can be changed (P.111). Main display Sub-display ∼...
Page 33  Message R at the i-mode center, the FOMA Current time (Displayed in 24-hour format in terminal is full of Message F/Message R at other than the stand-by display) the i-mode center, the i-mode center is full of  When the Clock is set to [Pict clock], the clock Message F is displayed in the stand-by display (P.111).
Page 34 Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information.
Page 35: About The Sub-Display
Guide Display To utilize the FOMA terminal’s functions when using the Normal style, use the 4-way keys (Up/Down/Left/Right arrow keys), the JOG, the Mail key, the i-mode/i-αppli key, the MENU key, and the i-Channel key according to the instructions shown in the guide display. Display Operation Display...
Page 36: Selecting The Menu
Selecting the Menu Press (MENU) to display the Menu display. You can select the menu display from [Kisekae menu]/[Standard menu]/[My Selection].  The Kisekae menu is displayed at the time of purchase.  You can change the menu when you start or settings of icons for the Standard menu, and you can switch the Kisekae menus (P.115, 117).
Page 37: The Standard Menu Or Reset The Menu Settings (P
to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad. For the functions that can be executed using a number key, see the list of menus (P.374). Selecting a Function from the Function Menu The Function menu is a menu that plays an auxiliary role for each function.
Page 38: Using The Uim
Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in the FOMA terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power off and fold the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.
Page 39 About the Function for Restricting UIM Operation The FOMA terminal provides a function for restricting UIM (FOMA card) operation in order to protect your data and files. If you record a videophone message or download files or data from sites or mail while the UIM is inserted in the FOMA terminal, the UIM operation restriction function is automatically set for these data and files.
Page 40: Attaching And Removing The Battery Pack
WORLD WING WORLD WING is the DoCoMo’s FOMA international roaming service that enables you to place or receive a call using the same mobile phone number even if you are overseas, just by using the UIM (green/white) and a WORLD WING service-compatible FOMA terminal. ※...
Page 41: Charging The Foma Terminal
If you continue using i-αppli, talking on the videophone, or watching One Seg for a long period of time with the battery being charged, the life of the battery pack may become shorter. Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
Page 42  The continuous stand-by time is an estimated battery time available on the FOMA terminal when it is folded and can receive radio waves properly. The continuous stand-by time during the stationary state indicates the average battery time available on the FOMA terminal that is placed stationary when it is folded and can receive radio waves properly.
Page 43: Checking The Battery Level
● During iC communication or when the FOMA terminal comes within the communication range with the reading device while charging the battery, the Charge indicator and FeliCa Sign light at the same time. ● When not using the AC adapter for a long period of time, remove its power plug from the AC outlet. ●...
Page 44: Powering On/Off
Powering On/Off <Power on/off>  When you power on the FOMA terminal, the screen informing to execute the software update automatically may appear (P.402). Press (PWR) for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and an animation is displayed.
Page 45: Setting The Date And Time
Setting the Date and Time <Date/time> You can set the date and time either by automatically correcting the time based on the time information obtained from the DoCoMo network or by manually setting the time. Example: Correcting the time automatically From the Menu, select [Settings] →...
Page 46: Notifying The Recipient Of Your Phone Number
Notifying the Recipient of Your Phone Number <Notify caller ID> When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling.  The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID. From the Menu, select [Settings] →...
Page 47 Saving Your Personal Data You can save your personal data such as your name, postal address, and mail address, and check saved data in the Own number display and quote this data in the text input display. Press (Edit) in the Own number display. Ｂａｓｉｃ...
Page 48 Press and save each item at the Detail display. Icon Settings Select an image from My picture/i-motion of the Data Box or record one.  You can set the following files. Category File format File size Image size My picture GIF/JPEG Max.
Page 49 Voice/Videophone Calls ■ Placing Voice/Videophone Calls What is Videophone? ......................48 Placing a Voice/Videophone Call ..................49 Switching to/from Voice/Videophone Call ...... <Chg. to videophone/Chg. to voice call> Using the Redial/Received Record ......... <Redial record/Received record> Setting the Chaku-moji ..................<Chaku-moji>...
Page 50 What is Videophone? You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own.
Page 51 Placing a Voice/Videophone Call Check the radio wave condition and enter a phone number. Example: Placing a voice call Enter a phone number in the stand-by display.  You can enter a phone number of up to 80 digits.  Make sure to include the area code, even for a local call. When you press the wrong number Press to delete the entered digits one by one from the right.
Page 52 ● See P.56 for sending the Chaku-moji and P.57 for placing a voice or videophone call by specifying the condition. ● For a voice call, you can also place it in the order of step 2 → step 1. Press and enter a phone number, and the call is dialed automatically after about five seconds.
Page 53 Using the Hands-free Function When you switch to the hands-free operation during a call, you can hear the caller’s voice from the speaker and talk hands-free. Example: Switching to the hands-free operation during a voice call Press ( ) during a call. The call is switched to the hands-free operation and “...
Page 54 Entering a “+” If you enter “+” at the beginning of a phone number when the Auto conversion of the Int’l dial assist setting is set to [ON], a call is dialed by automatically adding the set international access number (set to “009130010” at the time of purchase). Press for over a second in the stand-by display.
Page 55 Using the Redial/Received Record <Redial record/Received record> Up to 30 previously placed/received calls are saved as call records with their dates/ times, phone numbers, and names. The phone numbers or names appear in descending order from the most recent call. For a PushTalk call, the group name or the first member’s name appears.
Page 56 To place a videophone call Move the cursor to a call record and press (V.phone). To originate a PushTalk call Move the cursor to a call record and press To send mail You can send mail to a person whose phone number and mail address are saved in the Phonebook.
Page 57 To delete several call records From the Function menu, select [Delete] → [Select&delete], select call records, press (Complete), and select [Yes]. To delete all call records From the Function menu, select [Delete] → [Delete all], enter the Security code, and select [Yes].
Page 58 Setting the Display for Chaku-moji Being Received You can set the display style to be used when you receive a Chaku-moji message. From the Menu, select [Settings] → [Management] → [NW Services] → [Chaku-moji] → [Set Message display] and press : Receive and display all Chaku-moji.
Page 59 ● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is required. ● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received in a condition other than that set using the Set Message display menu.) ●...
Page 60 Enter a phone number in the stand-by display and press (Option). [Call method] : Select [Voice call]/[Videophone]/[PushTalk]/[SMS]. ＯｐｔｉｏｎｃａｌｌＰｈｏｎｅｎｕｍｂｅｒ [Caller ID] : Select whether to notify your phone number to the recipient. When you select [None specified], follow the setting of the Set Notification.
Page 61  If you have an overseas specific 3G mobile phone, you can connect to an international videophone by selecting videophone after the above dialing method. ※ See the NTT DoCoMo’s website for information about countries to which a videophone call can be connected and telecommunication companies.
Page 62 From the Menu, select [Settings] → [Management] → [NW Services] → [Int’l dial assist] and press [Auto conversion] : Set whether an international access number is automatically added. Ｉｎｔ’ｌｄｉａｌａｓｓｉｓｔ [Int’l prefix] : Save an international access number and set the Auto assist number. Ａｕｔｏｃｏｎｖｅｒｓｉｏｎ...
Page 63 Placing a Call by Specifying a Sub-address <Sub-address> You can set to place a call to a specific phone or communication device by specifying a sub-address.  The sub-address is also used when you select a content in V-Live. From the Menu, select [Settings] → [Call] → [Call assist] → [Sub-address] and press [ON] : Recognize the numbers after “...
Page 64 Improving Voice Clarity by Suppressing Background Noise <Reduce noise> You can suppress background noise during a voice or videophone call or during playing back an answering message set for the record message. From the Menu, select [Settings] → [Call] → [Call quality] → [Reduce noise] and press [ON] : Suppress background noise.
Page 65 Receiving a Voice/Videophone Call When you receive a voice or videophone call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. Example: Receiving a voice call When receiving a call, press A phone number appears in the display when a caller sends it.
Page 66 Receiving a Call by Switching to/from Voice/Videophone Call A caller can switch between voice and videophone calls during a call. When the caller switches the voice call to the videophone call, a recipient can select whether to send a camera image. ...
Page 67: During A Call
Setting the Operation for the FOMA Terminal Being Folded during a Call <Setting when folded> You can end a call or put a call on hold by just folding the FOMA terminal during a voice or videophone call. You can also end a call or switch a call to the hands-free operation by folding the FOMA terminal during PushTalk communication.
Page 68: Putting A Call On Hold
Putting a Call on Hold during a Call <Holding> The call can be put on hold during a voice or videophone call so that your voice cannot be heard by the recipient.  Even if the call is put on hold, the caller is charged for the call. Press (Func) during a call, select [Holding], and press Both you and the recipient hear the melody “Hamabe no uta”.
Page 69 Press ) for over a second in the stand-by display. The Public mode is set and “ ” appears.  When the Manner mode and the Public mode are set simultaneously, the Public mode has priority. To cancel the Public mode Press ) for over a second in the stand-by display.
Page 70 Using the Public Mode (Power off) <Public mode (Power off)> The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places. When the Public mode (Power off) is set, the guidance is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone (such as in hospitals, airplanes, and near priority seats in trains), provided that there is an incoming call when the FOMA terminal is powered off, and then the call is disconnected.
Page 71 Checking the Missed Calls <Missed call> When you are unable to answer an incoming call or receive new mail, the notification icon (P.32) appears in the stand-by display. If a voice, videophone, or PushTalk call or 64K data communication is not answered, “...
Page 72 When Receiving a Call The answering message is played back to the caller after the ring tone Ｐｌａｙａｎｓｗｅｒｍｅｓｓａｇｅ sounds for the set duration. ドコモ一郎 To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 73 Select an image to be sent when recording the caller’s image from My picture of the Data Box at [Record img(V.phone)].  You can set the following files. Category File format File size Image size My picture GIF/JPEG Max. 50K bytes Max.
Page 74 Playing Back/Deleting a Record Message/Videophone Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.328). Playing Back a Record Message/Videophone Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Ｐｌａｙｒｅｃｏｒｄｍｅｓｓａｇｅ...
Page 75 Using Chara-den When you place a videophone call, you can send a character instead of a camera image. You can press keys on the keypad to move a character or some character’s mouth to correspond to the voice on the microphone. ...
Page 76 Setting the Videophone Operation <Videophone setting> Setting the Display to Be Used in a Videophone Call You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 77 Setting the Videophone Image Quality You can set the quality of an image to be sent to the recipient. From the Menu, select [Settings] → [Call] → [Videophone] → [Visual preference] and press [Prefer img qual] : Send an image with priority on image quality. [Normal] : Send an image by keeping a balance between image quality and movement.
Page 78 Setting How to Answer a Videophone Call during i-mode You can set how to answer a videophone call received during i-mode or packet communication, for example, sending or receiving mail. From the Menu, select [Settings] → [Call] → [Videophone] → [V.ph while packet] and press [Prefer V.phone] : Receive a videophone call.
Page 79 PushTalk What is PushTalk? ........................ 78 Originating a PushTalk Call ....................80 Adding a Member during PushTalk Communication ............81 Receiving a PushTalk Call ....................82 Saving Data in the PushTalk Phonebook ................82 Originating a PushTalk Call Using the PushTalk Phonebook ..........84 Deleting a PushTalk Phonebook Entry .................
Page 80: What Is Pushtalk
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press (speak), you are charged for PushTalk communication.
Page 81 Operations during PushTalk Communication Operation Key operation Speak When the floor is open, you can speak only while you press and hold While another member has the floor, you cannot get it even if you press Add a member Press (Add).
Page 82: Originating A Pushtalk Call
Originating a PushTalk Call  You cannot originate a PushTalk call during a voice call, a videophone call, or data communication, or while the B mode is set in 2in1.  If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli.
Page 83: Adding A Member During Pushtalk Communication
Select a received record and press When a PushTalk call is originated, the signal tone sounds. ● If a member is disconnected during PushTalk communication among several persons, the disconnected member can come back to the session using the Redial/Received record as long as the other members continue it.
Page 84: Receiving A Pushtalk Call
Receiving a PushTalk Call When you receive a PushTalk call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming PushTalk call varies depending on the settings of the Incoming set, Manner mode, etc.  If you receive a PushTalk call during a voice call, the PushTalk call is not connected. The notification icon of missed call appears and the call is saved in the Received record.
Page 85 Press in the stand-by display and press (Func). The Function menu appears. Select [Create] and press The screen for selecting the saving method appears. [View phonebook] : Select from the FOMA terminal phonebook. [Direct input] : Save new data in the FOMA terminal phonebook and then save it in the PushTalk phonebook.
Page 86: Originating A Pushtalk Call Using The Pushtalk Phonebook
Select a group icon at [Icon]. Press (Complete). The group is saved in the PushTalk phonebook. Saving a Member to a Group Press in the stand-by display and press (Group). The Group list display appears. Select a group and press The Member list display of the selected group appears.
Page 87 Press When a PushTalk call is originated, the signal tone sounds. ＤｉａｌｉｎｇＰＴｇｒｏｕｐ携帯あき子携帯はる子ドコモ一郎ドコモ二郎 To speak ＯｎＰｕｓｈＴａｌｋ Press while the floor is open. You can speak while you press and Ｍｙｓｅｌｆ hold 携帯あき子Ｃａｌｌｉｎｇ携帯はる子Ｃｏｎｎｅｃｔｅｄドコモ一郎Ｃｏｎｎｅｃｔｅｄドコモ二郎Ｃｏｎｎｅｃｔｅｄ Press to end the communication.
Page 88: Deleting A Pushtalk Phonebook Entry
Press to end the communication. ● When originating a PushTalk call to a group, you can originate a call to up to four members even if more than five members are saved in the group. Deleting a PushTalk Phonebook Entry You can delete members saved in the PushTalk phonebook using three methods.
Page 89: Setting The Pushtalk Operation
Setting the PushTalk Operation <PushTalk setting> Setting Whether to Answer a Call Automatically You can set whether to answer an incoming PushTalk call automatically using the hands- free function. From the Menu, select [Settings] → [Application] → [PushTalk] → [Auto answer setting] and press [ON] : A PushTalk call you receive is answered automatically using the hands-free function.
Page 90 Setting Whether to Receive a PushTalk Call during i-mode You can set whether to receive a PushTalk call by disconnecting i-mode if there is any incoming PushTalk call during i-mode or i-mode communication. From the Menu, select [Settings] → [Application] → [PushTalk] → [i-mode arrival act] and press [Prefer PushTalk] : Receive the PushTalk call and disconnect i-mode.
Page 91 Phonebook Phonebooks the FOMA Terminal Can Use ................90 <Add to FOMA terminal phonebook> Saving an Entry in the FOMA Terminal Phonebook ..Saving an Entry in the UIM Phonebook ........... <Add to UIM phonebook> Saving the Redial/Received Record in the Phonebook ............94 Saving a Group .....................
Page 92 Phonebooks the FOMA Terminal Can Use The FOMA terminal is equipped with two types of phonebooks, the FOMA terminal phonebook, which you can set up with various functions, and the UIM (FOMA card) phonebook, which can be used with other FOMA terminals. Use either phonebook to your convenience. ...
Page 93 Saving an Entry in the FOMA Terminal Phonebook <Add to FOMA terminal phonebook> Up to 1,000 entries can be saved in the FOMA terminal phonebook. Press ) in the stand-by display and press (Create). Select [Main memory] and press To save an entry in the UIM phonebook Ｂａｓｉｃ...
Page 94 Press and save each item at the Detail display. Icon Settings Select an image from My Picture/i-motion of the Data Box or record a new one to be used as the Des call display that is displayed when placing/receiving a voice or videophone call, right after receiving mail, or when displaying the individual Phonebook entry.
Page 95 Press (Complete). The entered data is saved in the FOMA terminal phonebook. ● If you set [None] for the Des call display, Des phone/mail tone, or Select phone/mail Illum., then the call image, ring tone, and indicator color saved for the Group setting are automatically used for the respective function.
Page 96 Saving the Redial/Received Record in the Phonebook A phone number saved in the record can be directly added to the Phonebook. Example: Saving a received record in the FOMA terminal phonebook as a new entry Press ) in the stand-by display. To save a number from the redial record Press ) in the stand-by display.
Page 97 Saving a Group <Group setting> Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook.  You cannot change [ グループなし] in the UIM phonebook. Example: Saving a group in the FOMA terminal phonebook Press (Func) in the Phonebook.
Page 98 Displaying the Phonebook You can use the Phonebook to perform various operations. Example: Displaying the FOMA terminal phonebook Press ) in the stand-by display.  When 2in1 is set to the Dual mode, the Phonebook 2in1 setting is confirmed by か...
Page 99: Searching The Phonebook
Searching the Phonebook <Search phonebook> You can search the desired data of the Phonebook by entering a reading, memory number, and phone number. Example: Phonebook is ordered alphabetically Press ) in the stand-by display. Enter a reading. Every time you enter a letter, the cursor moves to the data which is the か...
Page 100: Editing A Phonebook Entry
Editing a Phonebook Entry <Edit phonebook> From the Phonebook, select an entry and press Press (Edit). The Edit phonebook display appears. Edit each item.  Follow the same steps as in “Add to FOMA terminal phonebook” (P.91, step 3 to 5) or in “Add to UIM phonebook”...
Page 101 Checking the Number of Entries Saved <Memory status> You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and entries saved as Secret. Press (Func) in the Phonebook. The Function menu appears. Select [Memory status] and press [Used] : Display the number of entries saved in the FOMA terminal...
Page 102 Storing (Restoring/Updating) the Phonebook at the Data Security Service Center <Data Security Service> You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. You can update or restore the stored Phonebook by connecting to the Data Security Service Center.
Page 103 Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■ Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie .......... <Sound effect>...
Page 104: Setting The Ring Tone/Image/Indicator Color For Incoming Call And Mail
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail <Incoming set> You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk call, or mail, etc.). Example: Performing incoming mail settings From the Menu, select [Settings] →...
Page 105 Select a ring tone from MUSIC/i-motion/Melody of the Data Box at [Ring tone].  You can set the following files. You can select a Chaku-Uta ® from [i-motion]. Category File format File size Image size MUSIC※ AAC-LC/HE-AAC Max. 5M bytes −...
Page 106: Setting The Sounds Of The Foma Terminal
■ Preinstalled melodies ■ Preinstalled music Title Title Title Title 着信音1∼5 ※ ※ Cuckoo Clock Hand Bell What Can U Do (Mashup Style) Symphony ※ School Chime Brilliance ※ Mandolin Concerto ※ Grand Clock Typewriter ※ Mordau ※ Elevator Vibe x Vibe Kanon Whistle ※...
Page 107: Adjusting The Volume Of Caller's Voice
Adjusting the Volume of Caller’s Voice <Volume> The volume of caller’s voice during a voice, videophone, or PushTalk call can be adjusted in six levels from level 1 (smallest) to level 6 (largest). From the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and press The Volume display appears.
Page 108: Setting Whether To Prioritize The I-Αppli Sound
Setting Whether to Prioritize the i- α ppli Sound <Pref. i αppli sound> You can set whether to prioritize the i-αppli sound when One Seg, MUSIC Player, and i-αppli are activated simultaneously. From the Menu, select [i-appli] → [i αppli setting] → [Pref. i αppli sound] and press Select [preference]/[unpreference] and press [preference] : You hear the i-αppli sound.
Page 109: Setting The Poor Signal Quality Alert
Setting the Poor Signal Quality Alert <Quality alarm> You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition. From the Menu, select [Settings] → [Call] → [Call quality] → [Quality alarm] and press [High] : Sound a high alarm tone.
Page 110: Muting The Ring Tone
Muting the Ring Tone <Manner mode> All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.109).
Page 111: Changing The Manner Mode Settings
Changing the Manner Mode Settings <Manner mode setting> The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. ＭａｎｎｅｒｍｏｄｅＳｅｔＯＦＦＭｏｄｅＭａｎｎｅｒＯｒｉｇｉｎａｌｍａｎｎｅｒ Select the type of the Manner mode at [Mode]. Press (Complete).
Page 112: Setting The Stand-By Display
Setting the Stand-by Display <Stand-by display> You can set the image for the stand-by display, image quality, Calendar/Clock display, whether to show or hide the guide display, and functions to be activated when switching to the TV style in stand-by status. From the Menu, select [Settings] →...
Page 113 Select the type of calendar at [Calendar]. [LTC 1Week] : Display the one-week Lifetime Calendar. [LTC 1Month] : Display the one-month Lifetime Calendar. [Cal. 1Month(S)] : Display the one-month calendar (small). [Cal. 1Month(L)] : Display the one-month calendar (large). [Cal. 2Months] : Display the two-month calendar.
Page 114: Setting Images For Placing A Call/Sending Mail
Setting Images for Placing a Call/Sending Mail <Animation> You can set an image that appears when you place a voice or videophone call, send mail, and perform other events. Example: Setting an image to be used when you place a call From the Menu, select [Settings] →...
Page 115: Setting The Display For The Sub-Display
Select a color of the font to be displayed at [Disp. call/rcv. No.]. [dark] : Set the darker color for the display or call record display when placing/receiving a call, or the font for the received/sent mail lists. [light] : Set the lighter color for the display or call record display when placing/receiving a call, or the font for the received/sent mail lists.
Page 116: Saving Power For The Display
Select [ON]/[OFF] of adjusting automatically at [Auto setting]. Set the main display light brightness at [Adjust light]. Select from [1 to 5]. To reset to the default brightness Press (Reset). Select [ON]/[OFF] of the Keypad light at [Keypad light]. Select [Backlight always on] and press [Charging] : Set whether to keep the light on during charging.
Page 117: Changing The Appearance Of The Menu
Changing the Appearance of the Menu <Menu setting> You can switch the menu to be displayed when you press (MENU) in the stand-by display, and also set images to customize 12 icons displayed in the Standard menu. Example: Setting an image as the icon for i-mode From the Menu, select [Settings] →...
Page 118 Example: Setting a Kisekae tool From the Menu, select [Settings] → [Display] → [Kisekae setting] and press [Kisekae Tool] : Set the Kisekae tool. Ｋｉｓｅｋａｅｓｅｔｔｉｎｇ [Color theme setting] : Set the colors such as background color or coloration ＫｉｓｅｋａｅＴｏｏｌＣｏｌｏｒｆｕｌＷｈｉｔｅ pattern at once.
Page 119: Customizing The Kisekae Menu
Resetting the Settings of the Display and Sound You can reset the settings of the display and sound set by the Kisekae Tool to the default settings. From the Menu, select [Settings] → [Management] → [Reset] → [Reset display/ sound] and press The Security code screen appears.
Page 120: Informing Missed Call/New Mail With Indicator
Resetting the Operation History of the Kisekae Menu Some Kisekae menus save the frequencies in use of menu items as an operation history and change the menu items automatically. The Operation history can be deleted. From the Menu, select [Settings] → [Management] → [Reset] → [Reset menu log] and press The Security code screen appears.
Page 121: Setting The Font Size
Setting the Font Size <Font size> Setting the Font Size At Once You can set the size of fonts to be used for displaying the Kisekae menu, Phonebook, Call record, mail/SMS, and sites or for entering a word at once. From the Menu, select [Settings] →...
Page 122: Changing The Screen Display To English
Changing the Screen Display to English <Select language> Menus, messages, and other displays can be displayed in either Japanese or English. From the Menu, select [設定] → [管理] → [バイリンガル] and press [Japanese] : Set the display language to Japanese. バイリンガル...
Page 123: Security Settings
Security Settings ■ About Security Codes Security Codes Used on the FOMA Terminal ..............122 Changing the Security Code ............... <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 125 ■ Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
Page 124: Security Code
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the network services, i-mode password, etc. are available.
Page 125: Puk Code
i-mode Password The 4-digit “i-mode password” is required when saving/deleting My Menu or subscribing/ canceling message service or i-mode charged service, etc. (There may be other passwords for the i-mode used by IP (information service providers).) The i-mode password is set to “0000” at the time of subscription. It can be changed by yourself.
Page 126: Changing The Security Code
Changing the Security Code <Change code> From the Menu, select [Settings] → [Management] → [Change code] and press Ｉｎｐｕｔｓｅｃｕｒｉｔｙｃｏｄｅ Enter the current Security code and press (OK). ＊ The entered Security code is displayed as asterisks ( Enter the new Security code and press (OK).
Page 127 Changing the PIN1 Code/PIN2 Code  To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears. Enter the Security code and press (OK).
Page 128 Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Functions Description Lock all...
Page 129 ● To call emergency numbers (110, 119, and 118) when the Lock all is set, enter the emergency number ＊ and press . The emergency number is displayed as asterisks ( ) in the security code input field of the Security code screen.
Page 130 ● Any other active function is terminated when the Omakase Lock is set. ● The Omakase Lock can be used even when another lock function is set. If you set the Omakase Lock while the Public mode (Drive mode) is set, you cannot receive a voice or videophone call. ●...
Page 131 Protecting Your Personal Data in the Phonebook, Schedule, etc. <Personal data lock> You can disable the following functions to prevent others from viewing/editing your personal information such as the Phonebook and Schedule data. - 1Seg - MUSIC Player - Music&Video Channel - Lifetime Calendar - Camera - Full Browser...
Page 132 Restricting Dialing from the Keypad <Key dial lock> The keypad is locked to restrict placing a voice or videophone call or originating a PushTalk call. To cancel the Key dial lock temporarily, enter the Security code.  When you set the Key dial lock, you cannot perform the following functions. - Place a call using the keys on the keypad (excluding calls made by the 2-touch dial or using the Flat-plug Earphone/Microphone with Switch), place a call to a recipient who is not saved in the Phonebook using the Received record, or [Call back] from i-mode mail...
Page 133 Press The Music Touch Key is locked. To cancel the lock Press while the sub-display lights. While the sub-display is turned off, the sub-display lights when pressing . Press again to cancel the lock. Setting the Display of the Redial/Received Record <Record display>...
Page 134 Protecting Mail from Unauthorized Access <Mail security> You can set the FOMA terminal not to display the received/sent/saved mail by folder. You can also use this function not to display the Receive/Send ranking and Sort inbox/outbox. To cancel this function temporarily, enter the Security code. From the Mail menu, select [Inbox]/[Outbox]/[Draft] and press Press (Func).
Page 135 Press (Complete). The screen for confirming the change of the security setting appears. Select [Yes] and press The Data security is set. Specifying Phone Numbers to Accept/Reject Calls <Accept/Reject call> You can set to accept/reject voice, videophone, or PushTalk calls only from specific phone numbers.
Page 136: Rejecting Calls With No Caller Id
Enter a phone number at the number field. Press The list is saved and the Accept/Reject call display is restored. Press (Complete). The Accept/Reject call from specified phone numbers is set. Rejecting Calls with No Caller ID <Denied no ID> When receiving a voice, videophone, or PushTalk call without the caller’s phone number displayed, the reason for not displaying it is shown.
Page 137 Select [ON]/[OFF] at [Missed call display]. [ON] : Display all calls in the Received record. [OFF] : For a call the start time of which is shorter than the set time, neither the missed call notification icon nor the received record is displayed. The call is saved in the Received record. When the operation of the record message or videophone message is started, the notification icon of missed call appears and the received record is displayed.
Page 138 Even if you lose the stored data, for example, if you accidentally lost the FOMA terminal or it had a water-related trouble, you can restore the stored data at the Center into a new FOMA terminal. Also, the phonebook data saved in both the FOMA terminal and Data Security Service Center can be kept it latest automatically on a regular basis.
Page 139 Camera About the Copyright Objects, such as movies, still images, and sounds, recorded using the FOMA terminal and productions on a site (program) or Internet site are prohibited by the copyright law from reproduction, transformation, and compilation without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
Page 140: Before Using The Camera
Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail and set for the stand-by display, etc. To use the microSD memory card, you need to obtain a microSD memory card separately.
Page 141 About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data Box] When saved to [Data Box] YYYYMMDDhhmmss YYYYMMDDhhmmss  The recorded year, month, date, hour, minute,  The recorded year, month, date, hour, minute, second is displayed.
Page 142 About Recording Time of Movie The recording time of movie that can be saved in the Data Box or microSD memory card varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■...
Page 143 Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected.  You can use (Display) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
Page 144 Recording Still Images <Shoot by photo> When recording with the Out-camera, you can use the Auto focus function to focus on an object at the center of the display and record still images. You can also record a still image in the TV style (P.27). ...
Page 145 ● When there is not enough memory or the number of saved images exceeds the maximum number, the message appears. Change the place to save the image or delete unnecessary images. ● When you switch to the Shoot by photo mode from the Movie shoot mode, the following items are reset. Item Default setting Item...
Page 146 Recording Images with Frames You can record an image with a frame, which can be selected from the preinstalled frames or downloaded frames.  For Out-camera recording, you can select a frame size of [sQCIF(128×96)], [QCIF(176×144)], [QVGA(240× 320)], [CIF(352×288)], and [Stand-by(480×864)]. For In-camera recording, you can select the frame size of [sQCIF(128×96)], [QCIF(176×144)], and [CIF(352×288)].
Page 147 Recording a Still Image Using the BestPic™ Mode Just by bringing an object into focus using the Auto focus function and pressing the shutter, you can record a total of nine continuous still images in a moment before and after you press the shutter, from which you can select the best shot. ...
Page 148: Recording Movies
Recording Movies <Movie shoot> You can make movie recordings with the built-in camera. You can also record a movie in the TV style (P.27).  The movie recording time varies depending on where to save a movie (P.140). (Func) in the Camera mode display, select [Shoot] → [Switch mode] → Press [Movie shoot], and press The display switches to the Movie shoot display and “...
Page 149: Changing The Camera Settings
● When there is not enough memory or the number of recorded time of saved movies exceeds the maximum number, the message appears. Change the place to save the movie or delete unnecessary movies. Even if recording is possible, the maximum recording time may not be achieved. ●...
Page 150 Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording.  When the Shoot mode is set to [Continuous mode] or [Best Pic™], you cannot switch the camera.  When the Shoot mode is set to [Shoot with frame] and the image size is set to [QVGA(240×320)] or [Stby(480× 864)], you cannot switch the camera from the Out-camera to In-camera.
Page 151 Switching the Direction for Recording Movies You can switch the direction for recording movies of [QVGA(320×240)] size.  When the image size is set to [sQCIF(128×96)], [QCIF(176×144)], or [VGA(640×480)], you cannot select the Change screen. (Func) in the Camera mode display, select [Shoot] → [Switch mode] → Press [Movie shoot], and press The display switches to the Movie shoot display.
Page 152: Adjusting Zoom
Adjusting the Camera during Recording  In the TV style, the Function menu in the Camera mode display cannot be displayed. Adjusting Zoom You can adjust the zoom of an image when you record using the Out-camera. The zoom magnifications that can be adjusted for each image size are as follows. When recording a still image When recording a movie Image size...
Page 153 Select a scene and press The Select scene is set and the icon for the current scene type appears.  No icon appears for [AUTO]. Beach/snow People Party Night scene Landscape Sports Low Light Adjusting White Balance The color balance of the image can be adjusted depending on the lighting condition. If a recording image appears in unnatural colors, set the white balance in accordance with the recording environment.
Page 154: Adjusting Brightness
Adjusting Brightness The image brightness (EV: Exposure Value) can be adjusted according to the ambient condition. The exposure can be adjusted in 13 levels from ‒2.0EV to +2.0EV for recording with the Out-camera and in seven levels from ‒1.0EV to +1.0EV for recording with the In-camera. (Func) in the Camera mode display, select [Adjust] →...
Page 155 Setting the Camera Operation  In the TV style, the Function menu in the Camera mode display cannot be displayed. Selecting Where to Save Images You can set the place to save recorded images. Example: Selecting the microSD memory card to save the recorded still images Press (Func) in the Camera mode display, select [Set] →...
Page 156 Selecting the Image Quality You can select the image quality for recording images.  When the size of a movie is set to [QVGA(320×240)] or [VGA(640×480)], you can only select [Super fine] for the image quality. When the size of a movie is set to [sQCIF(128×96)], you cannot select [Super fine] for the image quality.
Page 157 Setting the Effective Distance of the Auto Focus You can set the effective distance of the Auto focus function when you record still images with the Out-camera. (Func) in the Camera mode display, select [Set] → [Auto focus], and Press press The menu for selecting the Auto focus type appears.
Page 158 Resetting File Numbers When a still image with the file number (P.139) “999-9999” is saved in the microSD memory card, no more still images can be saved even if there is a vacant space in these memories. The Reset file No. allows you to reset the file numbers up to the largest file number saved in the microSD memory card.
Page 159 (Func), select [Set] → [Shoot mode], and press Press The menu for selecting a shoot mode appears. [Image+Sound] : Record a movie with video and sound tracks. [Image only] : Record a movie with video track only. No sound is recorded. [Sound only] : Record a movie with sound track only.
Page 160 Locate the JAN/QR code at the center of the display and press (Scan). The scanning of the JAN/QR code starts. When the scanning is completed, the end sound is heard and the data ＳｃａｎｎｉｎｇＳｃａｎｎｉｎｇ that has been scanned is displayed in the normal display. To save scanned data such as a phone number Move the cursor to data such as a phone number and from the Function menu, select [Add to phonebook] →...
Page 161 i-mode/i-motion/i-Channel ※ i-mode is a paid service that requires a subscription. What is i-mode? ......................... 160 Displaying the i-mode Menu ................. <i-mode menu> ■ Displaying a Site Displaying Sites ........................161 Using Sites ......................... 162 Saving a Site in My Menu ................. <My Menu>...
Page 162 What is i-mode? Displaying the i-mode Menu <i-mode menu> i-mode allows you to use the i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal) to Press (i-mode) in the stand-by display. access various online services such as site (program) connection, Internet connection, and i-mode mail.
Page 163: Displaying Sites
Reconnecting to the Web Page Displaying Sites Displayed Last Various sites offered by IP (information service The site displayed when you last connected to i-mode providers) can be displayed (the subscription is is recorded as the Last accessed URL. You can directly necessary for some sites).
Page 164: Using Sites
Reloading a Page Using Sites The page, which is displayed incorrectly or updated Selecting Links or Other Items of Choice frequently, can be reloaded so that the latest data is displayed. When using a site, you may display a linked site, enter texts (textbox) or select an item from multiple options While displaying a site, press (Func).
Page 165 Displaying a Site Correctly What is Flash? If the display of the text is incorrect on a site, you can Flash is an animation technology that uses animation reload the page after changing the character code. and sound. Flash movies enhance site content for richer expression.
Page 166 Saving a Site in My Menu Displaying Internet Sites <My Menu> <Internet connection> If you save the frequently used sites in My Menu, you can access them easily from next time. Up to 45 sites i-mode compatible Internet site can be displayed from can be saved in My Menu.
Page 167 Displaying a Site Saving a Site to Display It Quickly A site can be displayed using a bookmark. <Bookmark> From the i-mode menu, select [Bookmark] and Up to 200 URLs of the sites you display frequently can press be saved in the Bookmark. The sites can be directly A list of bookmark folders appears.
Page 168: Deleting A Bookmark
Moving a Bookmark to a Different Saving a Site in the Screen Folder Memo <Screen Memo> Bookmarks can be moved to a different folder using You can save sites as your favorite ones in the Screen three methods. Memo. You can also instantaneously call up a saved Example: Moving a bookmark screen memo.
Page 169: Downloading Data From Sites
Select [Save] → a graphic and press Protecting a Screen Memo The selected image is displayed in a frame and the screen You can protect screen memos from being overwritten. for selecting the place to save to appears. [Data Box]: You can protect up to 50 screen memos.
Page 170 Example: Downloading a melody from a related site Using the Phone To/Mail To/ While displaying a site, select a melody and Web To/i- α ppli To/Media To press You can use highlighted information in a site, message, Ｄｏｗｎｌｏａｄ mail main body, i-αppli, ToruCa card, PDF data, ｃｏｍｐｌｅｔｅｄ...
Page 171 Composing/Sending Mail from the Activating One Seg from the Current Current Display Display You can compose/send mail to a mail address currently You can activate One Seg from a program information displayed in the display (Mail To). link currently displayed in the display or set a timer for watching/recording a One Seg program (Media To).
Page 172 Changing the i-mode Host Setting Whether to Use the Saved Data (ISP Connection Communication) for Flash Movies You can set whether to use the saved data (P.163) ※ You do not need to change the Host setting when when you play back a Flash movie displayed on a site using the i-mode service of DoCoMo.
Page 173 Operating the SSL List Setting the FirstPass <SSL certificate> <User certificate> You can set to validate/invalidate the certificate that is You can issue and download the user certificate from required to connect to an SSL site. the FirstPass Center. The user certificate certifies that you are a FOMA From the i-mode menu, select [i-mode setting] →...
Page 174 Precautions on the use of FirstPass Changing the Host for ● The packet communication charge is free when you Certificate Issue <Select host> connect to the FirstPass Center. ● The packet communication performed when connecting to a FirstPass-compatible site is covered by the Pake-Houdai/ ※...
Page 175 Select [Save]/[Save temporary] and press What is i-motion? The screen for selecting where to save appears. [Data Box]: i-motion is movie data that contains both video and Save the i-motion in i-motion of the Data Box of the sound tracks. You can play back an i-motion on the FOMA terminal.
Page 176 Displaying the i-Channel What is i-Channel? The i-Channel service provided by DoCoMo or Press (i.ch) in the stand-by display. another IP (information service providers) distributes news, weather, etc. as graphics-based information to i-Channel-compatible terminals. You can run the latest information updates in the stand-by display as Telop text by automatically getting this information on a regular basis.
Page 177 Changing the i-Channel Settings When You Receive i-Channel Setting the Telop Text You can set the display speed of the Telop text and also turn off the Telop text. From the i-mode menu, select [i-Channel] → [Ticker] and press The Ticker display appears. [Stand-by]: → 最高１５℃ １０...
Page 179 Mail What is i-mode Mail? ......................178 Displaying the Mail Menu ................. <Mail menu> ■ Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail .......... <Compose and send mail> Composing and Sending Deco-mail ........<Compose and send Deco-mail> Using a Template to Send Mail ................... 183 <File attachment>...
Page 180: Displaying The Mail Menu
What is i-mode Mail? Displaying the Mail Menu <Mail menu> When subscribing to the i-mode service, mail can be exchanged with i-mode terminals as well as e-mail over Press (Mail) in the stand-by display. the Internet. In addition to the main body of text, you can attach up to 10 files (JPEG, ToruCa, PDF data, etc.) of up to 2M bytes in total.
Page 181 ● While editing mail, when you change the font size, from Composing and Sending the Function menu, from [Input method] → [Font size], the setting is only applied for the font size in the matching i-mode Mail <Compose and send mail> word list.
Page 182: Mail List
From the Mail menu, select [Compose message] Entering an Address from the Mail List and press You can send mail to several recipients saved in the The Edit mail display appears. mail list. Enter an address and subject. Press (Func) in the Edit mail display. ...
Page 183 ● Even if you delete a decorated character, the data used Decoration Icon Description for decoration may not be erased and the number of menu characters in the mail main body that you can enter could to select a font size be reduced.
Page 184 Specifying Decoration All at Once Entering the Main Body After Specifying Decoration  If you select “ ” from the decoration menu, all the specified decorations are canceled. Press in the main body input display. Press in the main body input display. The decoration menu appears.
Page 185: File Attachment
Using a Template to Send Mail File Attachment <File attachment> A template is a model used for Deco-mail, which is Yo u c a n s e n d i - m o d e m a i l w i t h u p t o 1 0 f i l e preset with decorations for the main body.
Page 186 Select [Add attach file] and press ● It may take time to send mail depending on the size of a file attachment. The Select attach file display appears. ● When you send mail to an i-mode terminal which does [Image]: not support 2M-byte file transmission, you can only attach Select an image from My picture of the Main memory/ files of the supported types and size within the capacity of...
Page 187 ● You can automatically receive up to 100K bytes of data Receiving i-mode Mail <Auto receive> in each mail, including the file attachment. You have to manually obtain a file attachment exceeding 100K bytes When mail is sent to the i-mode center, the FOMA from the i-mode center (P.189).
Page 188 Select [受信/削除] (Receive/Delete) and press Selecting to Receive i-mode Mail １／２ﾍﾟｰｼﾞまで選択したﾒｰﾙ <Receive option> を受信／削除 −−−−−−−− You can check through mail held at the i-mode center, ｉﾓｰﾄﾞｾﾝﾀｰから全てのﾒｰﾙを削除 where you can select mail to receive and delete mail without receiving it based on the information such as To delete all mail Select [削除] (Delete) below [ｉモードセンターから全て...
Page 189 ● A melody or i-αppli To link inserted in the mail main body, Replying to i-mode Mail an image in Deco-mail that cannot be redistributed, and a file not yet downloaded are not forwarded. <Reply to mail> You can compose and send replies to the received Saving the Mail Address/Phone mail.
Page 190 Saving the Phone Number/Mail Playing Back/Saving a File Address in Display in the Phonebook Attachment Received in i-mode Mail The mail addresses or phone numbers currently You can display/play back/save/delete a file that displayed in the site, received mail/sent mail, or ToruCa is attached or pasted in i-mode mail or a message card can be saved in the Phonebook.
Page 191 Select [Save attached] and press Deleting a File Attachment The Save to display appears. You can delete a file that is attached to i-mode mail. [Data Box]:  You cannot delete an i-αppli To link that is displayed in the Save a file attachment in the Data Box.
Page 192 Mail status Select a folder and press Unread mail The received/sent/saved mail list appears. Received mail ) Read mail (Protect ON) ) Replied mail (Protect ON) Ｉｎｂｏｘ１／２５ Received date/time １５：５１ドコモ一郎 Sender ) Forwarded mail (Protect ON) Ｐｈｏｔｏｃｏｎｔｅｓｔ Subject ) Sent mail (Protect ON) １２：３４ドコモ二郎...
Page 193 Select mail and press Storing the Mail at the Data Security Received mail Sent mail Service Center Address type Sent Ｉｎ４Ｏｕｔ１ You can use the Data Security Service to store up to 10 date/time Received ２００７／１１／１２１１：５４２００７／１１／１４２０：１２ Recipient 携帯なつ子 date/time 携帯はる子...
Page 194 Adding/Deleting Folders Moving Mail to a Different Folder In addition to [Inbox]/[Outbox], you can create up to You can move received/sent mail to another folder 20 folders each to manage received and sent mail. using three methods. Besides these folders, additional five folders are ...
Page 195: Deleting Mail
Example: Deleting received mail Protecting Mail From the Mail menu, select [Inbox] and press Received or sent mail can be protected from being To delete all received mail From the Function menu, select [Delete] → [Delete all], overwritten. Up to 500 received mails and 250 sent enter the Security code, and select [Yes].
Page 196 Displaying i-αppli Mail as Regular Mail Sorting Mail i-αppli mail can be displayed as regular mail. If after Received or sent mail in a folder can be sorted for the i-αppli with mail software is deleted, mail saved in display temporarily. the folder of the i-αppli with mail can be displayed in Example: Sorting received mail the same way as regular mail.
Page 197 Setting How to Display a List of Mails Assigning Separate Folders for Mail You can select the display style of Inbox, Outbox, and You can save requirements to sort received or sent mail Draft lists using the following four methods. The set so that they can be automatically assigned to folders.
Page 198 Select a folder to be used for sorted mail at [Folder Adding a Signature Automatically to sort into]. The saved signature can be automatically attached to When no folder is specified the main body when you compose mail. Mail is sorted to [Inbox]/[Outbox]. From the Mail menu, select [Mail setting] →...
Page 199 Setting a Mail List Playing a Melody Automatically from Mail By saving mail addresses in a mail list, you can send mail to all members in the list at the same time. The melody can be set to be played back automatically Up to 10 mail lists can be saved.
Page 200: Receiving A Message
Receiving a Message Enabling the Receiving of a File <Receive message> Attachment When a message is received while in the stand-by You can set whether to automatically receive the file display, the contents of the message are automatically attached to i-mode mail. displayed.
Page 201: Displaying A Message
Setting Auto-display Displaying a Message <Message R/Message F> You can set to display the contents of the message The list of received messages can be displayed. automatically when it is received while in the stand- Fr o m t h e M a i l m e nu , s e l e c t [ I n b ox ] → t h e by display.
Page 202: Deleting A Message
Select a message and press Deleting a Message ＭｅｓｓａｇｅＲ３ Received date/time ２００７／１１／２７０９：５２ You can delete messages using four methods. Subject Ｈｏｒｏｓｃｏｐｅ０７１１２７．ｍｉｄ０．９ＫＢ Example: Deleting Message R Fr o m t h e M a i l m e nu , s e l e c t [ I n b ox ] → t h e Ｓａｇｉｔｔａｒｉｕｓ...
Page 203 What is Early Warning Setting Early Warning “AreaMail”? (to be offered) “AreaMail” <Area Mail setting> Area Mail is a service that allows you to receive mail Setting Whether to Receive Area Mail such as the urgent earthquake news flash delivered by the Japan Meteorological Agency.
Page 204: Composing And Sending Sms
 You can exchange SMS with recipients/senders who Enter the Security code and press (OK). subscribe to an overseas telecommunication company other ＥｄｉｔＡｒｅａＭａｉｌｎａｍｅ than DoCoMo. See the NTT DoCoMo website for information ＡｒｅａＭａｉｌｎａｍｅ about countries and overseas telecommunication companies you can use for sending/receiving SMS. ＭｅｓｓａｇｅＩＤ...
Page 205: Receiving Sms
Receiving SMS Setting SMS <Receive SMS> <SMS setting> The FOMA terminal automatically receives SMS. You ※ Normally, you do not need to change the SMSC, can save up to 1,000 received SMS including i-mode Type of Number, and address settings. mail in [Inbox].
Page 207 i- α ppli What is i-αppli? ......................... 206 Downloading i-αppli from a Site ..................206 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................. <Auto-start> Setting i-αppli for the Stand-by Display ..........<i-αppli stand-by> Managing i-αppli ....................... 214 <i-αppli(microSD)> Displaying i-αppli Data in microSD memory card ......... Using Various i-αppli Functions ..................
Page 208: What Is I-Αppli
Perform the Software setting. What is i- α ppli? ＳＷｉｎｉｔ．ＳｅｔｔｉｎｇＮＷｓｅｔｔｉｎｇ By downloading i-αppli from its site, the i-mode Ｙｅｓ terminal can be made much more useful in many ways. ｐｐｌｉｓｔａｎｄ−ｂｙＮｏ For example, you can enjoy many kinds of games by Ｕｓｅｌｏｃａｔｉｏｎｉｎｆｏ...
Page 209 ● If you have deleted preinstalled software, you can Checking i-αppli Information When download it from “SO@Planet”. Downloading [i Menu] → [メニュー/検索] (Menu/Search) → [ケータイ電話メーカー] (Mobile Phone Manufacturers) → [SO@Planet] The software information can be displayed when (Japanese only) i-αppli software is downloaded from a site.
Page 210: Running I-Αppli
 ( ) : Osaifu-Keitai-compatible i-αppli software Running i- α ppli <Run i-αppli> (While the service is unavailable) : Software downloaded from an SSL site i-αppli software can be set to run manually. : GPS-compatible i-αppli software : Software set for automatic startup Press (i-mode) for over a second in the stand-by ...
Page 211 ● Some software applications start up immediately from the Setting i-αppli Operating Conditions site. This means that the software has been downloaded, but not saved. Also note that you cannot save some  It may not be possible to change some items of the saved downloaded software.
Page 212 ● If you set the NW setting or Stand-by NW setting to [No], Preinstalled Software the software may not be started and information may not be provided in a timely manner. ● スーパーモンキーボールモバイル fo r S O ( S UP E R ●...
Page 213 FOMA ● 通信環境確認アプリ (FOMA communication About timer recording function You can set a timer for recording a One Seg program by environment check i-appli) selecting a program you want to record from the program list provided by this appli.  Booking timer recordings Start this appli, select a program you want to record, select “＃ワンセグ録画予約”...
Page 214 ● ｉアプリバンキング (i-αppli Banking) ● DCMXクレジットアプリ(DCMX credit appli) ※ The display shown is an image for ※ The display shown is an image for explanatory purpose and may be explanatory purpose and may be different from the actual display. different from the actual display. This i-αppli is for using the mobile banking service conveniently.
Page 215: Running I-Αppli Automatically
● 楽オク出品アプリ ( A p p l i fo r s e l l i n g i t e m s a t Select [Auto-start] and press Rakuten) ＡｕｔｏｓｔａｒｔＵｓｅｒｓｅｔＯＦＦＳＷｓｅｔＩｎｖａ [User set]: Set the staring date/time and day of the week for each ※...
Page 216: Setting I-Αppli For The Stand-By Display
Terminating the i-αppli Stand-by Setting i- α ppli for the Stand-by Display Display <i-αppli stand-by> The i-αppli stand-by display is terminated and the Only one supporting software can be set for the i-αppli normal stand-by display is set. stand-by display. The software that supports the From the list of i-αppli software, select the software i-αppli stand-by display is identified by “...
Page 217 Adding/Deleting Folders Deleting i-αppli Folders in which software are saved can be added You can delete software using four methods. or deleted. Up to 10 folders can be used to manage Example: Deleting a software software and folder names can also be changed. Press (i-mode) for over a second in the stand-by ...
Page 218 Setting How to Display a List of Checking Error History and Trace Software Result The error histories for the i-αppli stand-by display and You can select the display style of a software list using the results output by the i-αppli trace feature can be the following three methods.
Page 219: Displaying I-Αppli Data In Microsd Memory Card
Using Infrared Communication from Displaying i- α ppli Data in i-αppli microSD memory card <i-αppli(microSD)> You can use the infrared communication (P.295) from You can display i-αppli data saved in the microSD the software running on the FOMA terminal. memory card, using a folder name. ...
Page 221 Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ......................220 What is the iC transfer service? ..................220 Starting an Osaifu-Keitai-compatible i-αppli ..............220 What is ToruCa? ......................... 221 Obtaining a ToruCa Card ..............<Obtain a ToruCa card> Displaying a ToruCa Card ................. <Display ToruCa> Managing ToruCa Cards ....................
Page 222: What Is Osaifu-Keitai
What is Osaifu-Keitai? What is the iC transfer service? “Osaifu-Keitai” provides convenient i-mode functions The iC transfer service※1 is a service provided for (i-mode FeliCa) that can be performed using the IC transferring all data stored on the IC card at once※2 card inserted in an i-mode terminal.
Page 223: What Is Toruca
● Reading/writing of data on the IC card from the software What is ToruCa? is interrupted in the following cases. Partially read/written data may be discarded. ToruCa is an e-card that can be obtained using - When the time preset for the Schedule alarm, Booking alarm, or Alarm occurs Osaifu-Keitai.
Page 224: Obtaining A Toruca Card
Select a folder and press Obtaining a ToruCa Card Obtained date/time ＴｏｒｕＣａ１／８ <Obtain a ToruCa card> Index １２：４５赤坂炭火・焼肉レストラン Category icon １１／１３築地 You can hold up and show the FOMA terminal to a 江戸前 ○○○ reading device to obtain a ToruCa or ToruCa(detail) １１／０８銀座...
Page 225: Managing Toruca Cards
Deleting a ToruCa Card Managing ToruCa Cards You can delete ToruCa cards using four methods.  You cannot move, sort, or search a ToruCa card in the [Used] folder. Example: Deleting a ToruCa card From the Menu, select [Osaifu-Keitai] → [ToruCa] Adding/Deleting Folders and press To delete all ToruCa cards...
Page 226: Setting The Toruca Details
Searching a ToruCa Card Assigning Separate Folders for ToruCa Cards You can search for ToruCa cards by genre. You can save requirements to sort ToruCa cards Press (Func) in the ToruCa folder list. obtained from a reading device so that they can be The Function menu appears.
Page 227: Setting Whether To Notify That Within The Communication Range
● If a ToruCa card satisfies several sorting requirements, Setting Whether to Check the the sorting requirement with a lower number in the list has Duplication of a ToruCa(Detail) Card higher priority. ● If you delete a folder for which the sorting requirement is You can set the FOMA terminal to check if the set, [ToruCa] is used as a sort destination folder.
Page 228: Locking The Ic Card Function
Locking the IC Card Function <IC card lock> You can lock the IC card function to prevent others from using it. Press ( ) for over a second in the stand-by display. The IC card function is locked and “ ” appears. To cancel the IC card lock Press ( ) for over a second in the stand-by display,...
Page 229: Gps Function
GPS Function Precautions on the Use of GPS Functions ................. 228 <Position location> Checking Your Location ................Using the GPS-compatible i-αppli ................. <i appli> Providing Your Current Location Information upon Request ....<Location provision> Notifying Your Current Location Information ..........<Location notice>...
Page 230 Precautions on the Use of GPS Checking Your Location Functions <Position location>  You may need i-mode subscription for the use of the GPS You can measure your current location to determine where function. you are. You can display a map based on the location ...
Page 231 To save the location information in the Phonebook Basic Service and Additional Service Select [Add to phonebook] → [New]/[Add].  Follow the same steps as in the Add to FOMA terminal There are the basic services and additional services for phonebook (P.91, step 3 to 6).
Page 232 Menus and Operations of the Top Display of “地図 Display and Operations of a Map アプリ” (Map appli)  The display shown is an image for explanatory purpose and may be different from the actual display.  When you use “地図アプリ” (Map appli) for the first time, the Terms of Use and precautions are displayed.
Page 233 While activating the software, press (メニュー) Display and Operations of the Search Result of (Menu), select [ナビをする] (Navigation) → [ナビを Neighboring Information する] (Navigation), and press  It explains only for the display and operations of the search result displayed on the map, and it does not apply for the Select [出発地] (Departure point), press , and display and operations selected from the list.
Page 234 Key operations while using the navigation Select [ で検索]/[ のみで検索] and press Key operation Action You can search a route by using the total navigation: [ メニュー(Menu) End the navigation and display the Top で検索] and the car navigation: [ のみで検索].
Page 235 When the settings for using each service is set to “毎回確認” Providing Your Current Location Information (Check every time) upon Request <Location provision> You can provide your current location information when Ｌｏｃ．Ｒｅｑ．ｆｒｏｍ: イマドコサーチ there is a request from another party. ドコモ一郎...
Page 236 Operations When the Period to Permit for Setting Whether to Provide Your Providing Location Information is Set Location Information Example: When the current date and time is “2007/11/23 14:00” You can set whether to accept or reject the request to Starting time: 15:00 Ending time: 22:00 provide your current location information.
Page 237 Starting time: 15:00 Ending time: 10:00 Setting the User-defined Host Settings Period for providing location Repeat ※ Normally, you do not need to change this setting. information Valid period type You can set one host for using the GPS service besides None From 2007/11/23 15:00 to −...
Page 238: Notifying Your Current Location Information
● When 2in1 is used, the location information is notified by Performing Settings for Using the GPS Number A, regardless of the 2in1 mode. Service ● The location information may be sent depending on the timing of cancellation. You can connect to the GPS service settings site and ●...
Page 239 Select [Phone number] → [Direct input], press Select a location history and press (Detail). and enter a phone number. Positioning date/time Ｌｏｃ．ｈｉｓｔｏｒｙ Type: E i t h e r P o s i t i o n l o c a t i o n , Enter the phone number within 26 half-width numeric ２００７／１１／１４１０：２０：１０...
Page 240 To save the location information in the Phonebook Select [From position loc.], press , and press Select [Add to phonebook] → [New]/[Add]. (OK).  Follow the same steps as in the Add to FOMA terminal The screen for confirming whether to paste the location phonebook (P.91, step 3 to 6).
Page 241 One Seg About One Seg ........................240 Before Using One Seg ....................... 241 Setting Channels ..................<Set channel list> Watching One Seg ..................<Activate 1Seg> <Program guide> Using the Program Guide i-αppli .............. <Booking list> Setting a Timer for Watching/Recording a One Seg Program ......Using Data Broadcasting ....................
Page 242 Display When Using One Seg for the First Time About One Seg After the purchase, when you use One Seg for the What is One Seg? first time, the display for confirming the notabilia of the service appears. Check the contents and press One Seg is a digital terrestrial broadcasting for mobile (OK).
Page 243 ■ The display that appears when One Seg is used for Before Using One Seg the first time When One Seg is activated for the first time, the display Step to Watch One Seg for confirming the notabilia of the service appears. When the FOMA terminal is in the TV style, switch to Example: When you watch One Seg for the first time the Normal style, and then check the contents and...
Page 244: Setting Channels
● When the multiple broadcast stations which have the same Setting Channels <Set channel list> remote-control number are retrieved, the message to the effect that the remote-control number is doubled appears. To use One Seg, you need to perform the channel Press and select the current location you are in from the Select service area display.
Page 245: Watching One Seg
Selecting a Channel List to be Used Watching One Seg <Activate 1Seg> You can select a channel list suitable for your current Using the Display for Watching One Seg location. Also, you can edit the saved channel lists. Normal style (Watching) Normal style (Recording) From the Menu, select [1 Seg] →...
Page 246 Data broadcasting mode Watching One Seg in the Normal Style Operation Key operation You can watch One Seg in the Normal style. Display the previous/ while using the data next page broadcasting site. From the Menu, select [1 Seg] → [Activate 1Seg] S w i t c h t h e d a t a Press (TV/DATA) for over a...
Page 247 Watching One Seg in the TV Style Setting While Watching One Seg When you switch the FOMA terminal to the TV style, Watching One Seg with Subtitles you can watch One Seg in the horizontal orientation. You can display subtitles while watching a program. ...
Page 248 to select [Display light] and press Adjusting the Image Quality The Display light menu appears. You can set the image quality of the video portion. to select brightness and press  You can set it either in the Normal style or in the TV style. Select brightness from [1 to 5].
Page 249: Using The Program Guide
Using the Sleep Timer Setting a Timer for Watching/Recording You can set to terminate One Seg automatically after a One Seg Program <Booking list> the certain period of time.  You can set it either in the Normal style or in the TV style. You can set a timer for watching or recording a One Seg program.
Page 250 Save each item. Press (Complete). ○: Allowed to be saved −: Not allowed to be saved A timer for watching/recording a program is saved.  To play back a recorded video, see “Displaying/Playing Booking Timer Icon Setting data Back One Seg” (P.277). program recording To set a timer for recording a program...
Page 251 ● You can also set a timer for watching/recording a program ● If you set an i-motion with video and sound tracks to the using a program information provided by the program alarm tone, a movie in the i-motion is displayed. guide i-αppli, site, mail, etc.
Page 252 When the timer recording star ting time comes while Select an alarm tone from MUSIC/i-motion/Melody watching One Seg of the Data Box at [Alarm tone]. The Preparing to Rec display appears. To cancel  You can set the following files. You can select a Chaku- recording, press and select [Yes].
Page 253: Using Data Broadcasting
Select a vibration type at [Vibrator]. Using Data Broadcasting [Pattern1]: Set short intermittent vibration. One Seg allows you to use the data broadcasting in [Pattern2]: addition to the video and sound broadcasting. Various Set long intermittent vibration. kinds of information including still images and movies, [Link melody]: Vibrates in accordance with the alarm tone.
Page 254: Using Tvlink
Using Displayed Information Recording One Seg While Watching Some data broadcasting or data broadcasting sites <Record One Seg> allow you to use displayed information to activate You can save a program as a video and a scene of a Phone To, Mail To, or i-αppli To function, download program as a still image while watching One Seg.
Page 255 Example: For the TV style ● A file name of a recorded video appears in the format of the recorded year, month, date, hour, and minute. For Press (Func) while watching One Seg. example, when a video is recorded at November 1, 2007, The Function menu appears.
Page 256 ■ When the Mail disp set is set to [Display telop] Receiving Mail While Watching When you receive mail, the Telop text is displayed. When One Seg you receive i-mode mail from the sender who is saved in the Phonebook, the name of the sender and subject are added to the Telop text.
Page 257 Setting Not to Hear Sound Effect of Various Settings for One Seg Data Broadcasting Site <Sound effect> <1Seg setting> You can set whether to hear sound effect provided by You can set functions regarding One Seg, reset the data broadcasting/data broadcasting sites. settings, etc.
Page 258 Setting the Operation for Incoming Mail Resetting the One Seg Settings to the While Watching One Seg Default Settings <Mail disp set> <Reset 1Seg set> You can set whether to display contents of the received You can reset the settings of the functions regarding mail or telop when you receive mail while watching One the One Seg video and sound to the default settings.
Page 259: Full Browser
Full Browser Displaying a Website Designed for PC ................258 Key Operations While Viewing a Website ................258 Managing a Bookmark ......................262 Setting the Full Browser Functions ..................262...
Page 260: Displaying A Website Designed For Pc
Displaying a Website Designed Key Operations While Viewing for PC a Website You can view websites designed for PC on the FOMA You can operate Full Browser both in the Normal and terminal using Full Browser. TV styles. The following key operations can be performed while ...
Page 261 To change the function assigned to a key Function Menus While Viewing a From the Function menu, select [Short cut], select a key, Website press (Edit), select a function to be assigned to the key, and press (Complete). To restore the default settings, press (Reset) in the Short While viewing a website, press (Func) to display...
Page 262 Action Menus While Viewing a Website Displaying Websites in the Multiple Windows While viewing a website, press (Action) to display the Action menu, and from the Action menu, the You can view several websites by switching windows. following operations can be performed. ...
Page 263: Changing The Display
Displaying a Frame Page Dragging You can display a website consisted of multiple frames. You can select an area or move a display using the Select a frame from the frame selection display to dragging operation in the Full Browser display. display a page.
Page 264: Managing A Bookmark
Uploading an Image Managing a Bookmark You can upload an image saved in the Data Box or Up to 200 URLs can be saved as bookmarks of Full microSD memory card to a website which allows you to Browser. upload an image. ...
Page 265 Setting Cookie Setting the Display Mode Cookie is the mechanism for temporarily saving You can set the display mode when activating Full information such as the user name, date and time you Browser. accessed the website, and number of accesses in the From the Full Browser menu, select [Full Browser FOMA terminal when you accessed a website.
Page 266 Displaying the Entire Page While Setting Whether to Use the Full Scrolling Browser Function You can set whether to display the entire page You can set whether to use the Full Browser function. automatically while scrolling. From the Full Browser menu, select [Full Browser From the Full Browser menu, select [Full Browser setting] →...
Page 267 Data Display/Edit/ Management ■ Using Still Image Displaying the Saved Image ................<My picture> Editing Still Images ................... <Edit photo> ■ Using Movie <i-motion> Playing Back Movie/i-motion ................Editing Movies ....................<Edit movie> ■ Using Chara-den What is Chara-den? ..................<Chara-den>...
Page 268: Displaying The Saved Image
Select an image and press Displaying the Saved Image Display quality <My picture> You can display images saved in My picture of the Data Box or microSD memory card. Press ) in the stand-by display, select [My picture], and press My picture folder list appears.
Page 269: Editing Still Images
Example: Pasting a frame and saving by overwriting ● When the file list of images in the microSD memory card is displayed, you cannot perform the Rcv loc. info or Delete From My picture file list, select an image, press loc.
Page 270 Pasting Text Trimming Part of an Image After Zoom In Text can be pasted to an image of [sQCIF(128×96)], You can specify a part of an image after zooming [QCIF(176×144)], [QVGA(240×320)], [CIF(352× in on it and trim it into a size of [sQCIF(128×96)], 288)], and [Stby(480×864)].
Page 271 Rotating an Image Storing an Image at the Data Security Service Center An image of [sQCIF(128×96)], [QCIF(176×144)], [QVGA(240×320)], [CIF(352×288)], [VGA(640× You can use the Data Security Service to store up to 480)], and [Stby(480×864)] can be rotated. 10 GIF/JPEG images at one time at the Data Security Service Center.
Page 272 Playback restrictions Playing Back Movie/i-motion Icon Playback restrictions Movie/i-motion with playback restrictions <i-motion> Movie/i-motion whose time limit on playback You can play back movie/i-motion that is saved in has expired i-motion of the Data Box or microSD memory card. To play back movie in a folder repeatedly From the Function menu, select [Continuous play].
Page 273 Press (Play). Playing Back i-motion by Each Chapter Display quality You can play back i-motion by each chapter. From the i-motion file list, select a movie/i-motion, press , and press (Func). The Function menu appears. Select [Chapter list] and press Ｃｈａｐｔｅｒｌｉｓｔ１／４...
Page 274: Editing Movies
Select a playlist to be saved and press Deleting/Editing the Name of the Playlist The screen for selecting the saving method appears. You can delete a playlist or edit its name. [Add]: Newly add selected movie/i-motion to the movie/i-motion Example: Deleting one playlist saved in a playlist.
Page 275 Select [Attach to mail(S)]/[Attach to mail(L)] and Converting the Image Size press You can convert a [QVGA(320×240)] or [VGA(640 ×480)] image size movie into the [QCIF(176×144)] image size. Example: Converting the image size and saving by overwriting From the i-motion file list, select a movie, press , and press (Func).
Page 276 Displaying and Operating Chara-den What is Chara-den? <Chara-den> You can display Chara-den characters saved in the You can send an avatar of your choice instead of your Chara-den folder of the Data Box. own image when you use the videophone function. You can make this avatar move by pressing the keys on the Press ) in the stand-by display, select...
Page 277: Playing Back A Melody
Select music data and press Playing Back Music Data <Music> You can play back music data saved in MUSIC of the Data Box and microSD memory card. Press ) in the stand-by display, select [MUSIC], and press ＭｕｓｉｃＯｒｉｇ．ｐｌａｙｌｉｓｆｏｌｄｅｒ１ＷｈａｔＣａｎＵＤｏ（Ｍ...
Page 278: Kisekae Tool
Select a folder and press Displaying/Playing Back Ｐｒｅｉｎｓｔａｌｌ１／２１ Kisekae Tool <Kisekae Tool> 着信音１ Management title 着信音２着信音３ You can display/play back a Kisekae tool that is saved 着信音４ in Kisekae Tool of the Data Box or microSD memory 着信音５Ｓｙｍｐｈｏｎｙ card.
Page 279 Press Displaying/Playing Back One The number of videos Where the playing back data is from <1Seg> You can display a One Seg recorded still image or play △ back a One Seg recorded video that is saved in 1Seg ○ の不思議...
Page 280 To set the image quality microSD memory card From the Function menu, select [Image quality] → [Normal]/[Sharp]/[Dynamic]. You can save Phonebook, mail, Bookmark, and other To adjust the display brightness From the Function menu, select [Display light] → data in the FOMA terminal to the microSD memory card, brightness.
Page 281: Memory Card
Inserting and Removing the microSD Displaying Data on the microSD memory card memory card ■ Inserting the microSD memory card Data saved in the microSD memory card can be  When inserting the microSD memory card, make sure to insert displayed and checked.
Page 282 Folder Setup of the microSD memory card When Displaying the Folders on the FOMA Terminal ○: Allowed to be saved ×: Not allowed to be saved △: Only allowed to be moved Data you can/cannot save in the FOMA terminal Category Contents of data One file...
Page 283 When Displaying the Folders on a PC When you save data of the FOMA terminal to the microSD memory card, a corresponding folder is created automatically.  The maximum number of files that can be saved is an estimated number, assuming the blank memory is used. FOMA terminal Estimated max.
Page 284 Data you can/ Data That Can Be Written/Read to cannot save from Data you cannot save from the and from the microSD memory card the FOMA terminal Category FOMA terminal and other information Selected file files files  It may take time to save data depending on the data size. ...
Page 285 Saving Data from the FOMA Terminal Saving Data from the microSD to the microSD memory card memory card to the FOMA Terminal You can copy data from the FOMA terminal to the You can copy data from the microSD memory card to microSD memory card.
Page 286 Saving a Melody and Image Checking the Usage Information You can save My picture, i-motion, Melody, My You can check the usage information of the microSD document, and MM File data to the FOMA terminal. memory card. Example: Saving data ...
Page 287  You can check the current USB mode and connection Using the FOMA Terminal with status by the following icons. a PC Icon Mode/Connection status <USB mode setting> Communication mode When you connect the FOMA terminal to a PC using microSD mode the FOMA USB Cable with Charge Function 01 MTP mode (Connected)
Page 288 Terminating the microSD Mode Copying Data from the FOMA Terminal to the UIM To remove the FOMA terminal from a PC, perform the procedure to safely remove the hardware on the PC in You can copy up to 50 FOMA terminal phonebook advance, which is slightly different for each OS.
Page 289: Managing Data Box
Copying Data from the UIM to Managing Data Box <Data Box> the FOMA Terminal Data handled by the FOMA ter minal, such as downloaded data and data recorded using the You can copy UIM (FOMA card) phonebook data and camera, are saved in the categories of the Data Box: SMS from the UIM to the FOMA terminal.
Page 290 Example: Displaying the file list in the [Preinstall] folder in My Category Folder name Contents of data picture Melody i-mode Melodies obtained from a site, Press ) in the stand-by display. i-mode mail, or i-αppli Preinstall Preinstalled melodies Type of memory being displayed ＤａｔａＢｏｘ...
Page 291 To change a folder name Select [Preinstall] and press Move the cursor to the folder and from the Function Ｐｒｅｉｎｓｔａｌｌ１／２０ menu, select [Edit folder] → [Edit folder name]. Enter Management title ＣｏｌｏｒＰｅｎｃｉｌｓ a name within 10 full-width or 20 half-width characters (seven full-width or 15 half-width characters in case of ＭｏｄｅｒｎＬｉｖｉｎｇ...
Page 292: Sorting Data
Select data and press (Func). Sorting Data The Function menu appears. Data in a folder can be sorted for display. Select [Move] → [Move one] and press  You cannot sort data in MUSIC. The screen for selecting where to move appears. From the Data Box, select a category →...
Page 293 Displaying/Editing Data Information Displaying the Data Box/Data Information You can change the data management title and file Displaying the Data Box Information name, and set file restrictions. The management title is displayed in the file list. Press (Property) in the Data Box. ...
Page 294 ■ List of display items and items that can be edited ◎: Can be edited ○: Display only −: Not displayed Music&Video My picture 1Seg Channel Chaku- Movie/ Chara- Kisekae Display item Chapter Chapter Melody Description ® Uta Full i-motion document Tool JPEG...
Page 295 Music&Video My picture 1Seg Channel Chaku- Movie/ Chara- Kisekae Display item Melody Description Chapter Chapter ® Uta Full i-motion document Tool JPEG Program (Chaku- (Movie/ Video Image ® Uta Full i-motion) Rec finish time Time on which the recording is −...
Page 296 In Case of Insufficient Memory Checking the Memory of the FOMA Terminal If there is not enough memory when you save or <Storage information> download data or software in My picture, MUSIC, You can display the memory use status of the FOMA i-motion, melody, My document, Chara-den, and terminal.
Page 297 What is the Infrared Communication? <Infrared communication> You can send and receive the Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, PDF data, and ToruCa card to/from a mobile phone equipped with the infrared communication function. To send/receive all entries, you need a 4-digit authentication password preset with a communication target recipient/sender.
Page 298 Data That Can Be Sent/Received via Infrared Communication You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, PDF data, and ToruCa card between mobile phones and other devices equipped with the infrared communication function.
Page 299 Receiving Data Using the Infrared Sending Data Using the Infrared Communication Communication <Receive Ir data> <Send Ir data> Receiving Data Sending Data From the Menu, select [LifeKit] → [Receive Ir data] Select data to be sent and press (Func). → [Receive] and press The Function menu appears.
Page 300: Using The Infrared Remote Control
Enter the Security code and press (OK). Using the Infrared Remote The Authentication password screen appears. Control Enter the authentication password. The screen for confirming whether to begin the infrared Once infrared remote control software is downloaded communication appears. from a site and saved in the FOMA terminal, the FOMA terminal can be used as the TV or DVD player remote Select [Yes] and press control.
Page 301 Performing iC Communication Receiving All Data  Place the FeliCa mark “  It is necessary that you and the sender determine the 4-digit ” of the FOMA terminal over that of the other terminal. Do not move either of the FOMA terminals authentication password beforehand.
Page 302: Displaying Pdf Data
Sending Data Using iC Displaying PDF Data <My document> Communication You can display PDF data saved in My document of the Data Box or microSD memory card. You can also Sending Data download PDF-compatible data from a site to the FOMA terminal and display/save it.
Page 303: Page Number
Operating method Setting How to Display PDF Data Operation Key operation Display the data in original Press (Fit/Tr img). Press (Func) in the PDF data display. size or by adjusting the page The Function menu appears. width to the display size Scroll Select [Detail info disp] and press Zoom in...
Page 304 Displaying the i Bookmark/Mark List Using a Bookmark/Mark Example: Displaying the i bookmark list Once you save a bookmark or mark in pages that you Press (Func) in the PDF data display. use frequently, you can display the linked page by The Function menu appears.
Page 305: Music Playback
Music&Video Channel/ Music Playback Handling the music data  Chaku-Uta Full ® and WMA (Windows Media Audio), ATRAC, and MP3 files which are played back on the MUSIC Player are stated as “music data” in this manual.  The FOMA terminal can play back WMA, ATRAC, and MP3 files and Chaku-Uta Full ®...
Page 306: What Is Music&Video Channel
Setting a Program What is Music&Video Channel? Music&Video Channel is a service that a music When you set a desired program in advance, the program of up to one hour is automatically distributed program data is automatically distributed at night. during the night only by setting your favorite channel From the Menu, select [MUSIC] →...
Page 307: Playing Back A Program
After Setting a Program Downloading a Program Manually “ ” appears in the stand-by display 12 hours before When failed to download a program automatically, you the downloading starts. can download it manually. A program is automatically downloaded at night From the Music&Video Channel menu, select a and the notification icon “...
Page 308 Operating method Select a program and press Operation Key operation Play Pause  Volume adjustment Use Beginning of the   next chapter  Beginning of the  current chapter  ○○ライブ  イントロダクション Beginning of the repeatedly.  △△△ previous chapter ＶＯＬ１６...
Page 309: Playing Back A Program From The Data Box
Checking the Program Chapter Playing Back a Program from the Data Box By displaying the program chapter list, you can check a title of each chapter, name of artist, and playback You can play back a program saved in Music&Video time.
Page 310: Transferring Music Data
■ Format supported for playback Transferring Music Data Format Description A sound compression technology developed You can transfer music data from a PC to the microSD by Microsoft Corporation, which is employed memory card inserted in the FOMA terminal using as the Windows standard sound compression ®...
Page 311: Downloading Chaku-Uta Full
® About Napster appli Transferring Music Data to a PC Using SonicStage ® You can also transfer music data using Napster appli.  You can download Napster ® appli from the website below. Music data such as music data (ATRAC format) bought http://www.napster.jp/ (as of October 2007) at the music distribution sites such as mora or a music ...
Page 312: Playing Back Music Data
 If you receive a voice, videophone, or PushTalk call or mail, Select [Save] and press or the Alarm/Schedule alarm/Booking alarm is activated while Ｓａｖｅｔｏ you are playing back music data on the MUSIC Player, the ＤａｔａＢｏｘ playback is interrupted and one of the above operations is ｍｉｃｒｏＳＤ...
Page 313 [Playlists]: Operating method Display the playlist. Select [Original playlist]/[Imported Operation Key operation playlist]/[WMA playlist] → a playlist → music data. Play Press (Play). [Songs]: Stop Press (Stop). Display the list of all music data. Select the music data. Volume adjustment Use [Top50]: Display up to 50 tracks in the order of the number of the Beginning of the...
Page 314 ® ■ Chaku-Uta Full to select [Artists] and pat When you play back music data with playback restrictions, the The artist list appears. followings are displayed. to select an artist → an album and pat Playback restriction Display The music data list appears. Playback time left “This data can be replayed XX times.
Page 315: Managing The Playlist
Deleting/Reordering Music Data of the Managing the Playlist Playlist There are three types of playlists that can be played You can delete music data from a playlist or reorder it back using the FOMA terminal. within a playlist. Even if you delete music data from a Original playlist playlist, the files of the music data are not deleted.
Page 316: Changing The Music Player Settings
Select a playlist and press (Func). Select whether to boost the bass sound at [CLEAR BASS]. The Function menu appears. To edit the name of a playlist [+2]: Move the cursor to the playlist and from the Function Boost the bass sound to more extent. menu, select [Edit name].
Page 317: Other Convenient Functions
Other Convenient Functions Multiaccess Feature ..................<Multiaccess> Multitask Feature ....................<Multitask> <Lifetime Calendar> Using the Lifetime Calendar ..............<Alarm> Starting the Alarm at a Specified Time ..............Saving Schedules ..................... <Schedule> Performing Frequently Used Functions Quickly ........... <My Selection> Setting a Function to Be Activated in the TV Style ......<Display rotated appli>...
Page 318: Multiaccess Feature
Placing a Voice Call during i-mode/Packet Multiaccess Feature <Multiaccess> Communication Multiaccess is a function that enables you to use a Example: Placing a voice call during i-mode voice call, packet communication, and SMS functions Press (MENU) dur ing i-mode or packet at the same time.
Page 319: Switching Functions
Icon Function name Icon Function name Using the Display during the Multitask Operation Data Security Service Text Memo Alarm setting Calculator / / : One/two/three or more tasks are being executed. changes to while playback is Alarm Data Box in progress on the MUSIC Player, changes to while watching One Seg, Schedule...
Page 320: Using The Lifetime Calendar
 When there are mail, the color defines the number of Stopping All Functions Currently mail. Activated Number of mail display Background color Number of mail Press (MENU). Cream 1 to 4 Beige 5 to 9 Press (Quit all). Orange 10 to 19 Select [Yes] and press Silver...
Page 321 ■ Typical display examples ● The Phonebook, Own number, and Schedule saved as Secret are not displayed in the Lifetime Calendar. Set the  When the image attached to mail cannot be displayed, “ ” Secret display to [ON] to display the data. appears.
Page 322 Select the display for each item. Setting the Display of Lifetime Calendar Press (Complete). You can set the data to be displayed in the Lifetime The LTC setting display appears. Calendar and set whether to automatically display the items to remember. Set the time before the item to remember is automatically displayed at [Memory auto display].
Page 323 Select an alarm to be set and press Set the volume at [Alarm volume]. Select from [OFF] and [1 to 5]. Ａｌａｒｍ１ To set the volume to [OFF] ＳｅｔＯＦＦＴｉｍｅ００：００ Press at level 1. ＲｅｐｅａｔＯＦＦＡｌａｒｍｔｏｎｅ Select an alarm image from My picture/i-motion of Ａｌａｒｍ（ｓｔｄ）...
Page 324 ● W h e n t h e A l a r m a n d S c h e d u l e a l a r m a r e s e t ● If you set an i-motion with video and sound tracks to the simultaneously, “...
Page 325 Select the schedule repeat type at [ Saving Schedules <Schedule> [OFF]: Do not repeat the schedule. Go to step 12. Up to 300 schedules, such as date and events/ [Eyd]: appointments can be saved for management. When a Repeat the schedule every day. Schedule alarm is set, the FOMA terminal activates the [Week]: alarm at the scheduled time.
Page 326 At the Schedule Alarm Time Setting the Schedule Alarm Operations The alarm sounds for about 30 seconds with the You can set the details of the operations of the indicator flashing and the schedule data is displayed. Schedule alarm. If there are several overlapping schedules with the Press (Func) in the calendar.
Page 327 Select an alarm image from My picture/i-motion of Displaying the Schedule the Data Box at [Alarm image]. The saved schedule can be checked using the  You can set the following files. calendar. File Category File size Image size format From the Menu, select [LifeKit] →...
Page 328 Deleting a Schedule Setting Holiday You can delete schedules using the following five You can set a day or a day of the week as a holiday methods. and cancel the holiday settings. A day set as a holiday is displayed in red. Delete one Delete a schedule.
Page 329 Performing Frequently Used Checking the Number of Schedules Saved Functions Quickly <My Selection> The number of schedules saved can be checked as You can save frequently used functions in My Selection well as the number of schedules still available to be and select a saved function directly.
Page 330 ● If there is an incoming call/mail or the Alarm/Schedule Setting a Function to Be Activated alarm/Booking alarm time comes while recording a voice memo during stand-by, the recording stops and the voice in the TV Style <Display rotated appli> memo recorded until then is saved.
Page 331 ● When you place a call to a toll-free number such as Automatically Resetting the Total Call NTT Free Dial or Directory Assistance (104), “0YEN” or Charge ＊＊＊＊＊＊ “ YEN” indicated for the call charge. ● The accumulated call charges are stored in the UIM. You can set to automatically reset the total call charge Therefore, if you switch the UIM, the accumulated total call at 00:00 a.m.
Page 332: Using A Memo
Enter numbers and operators to display the result. When the Call Charge Exceeds the Limit Press , and in this order. When the upper limit value of 0 to 9 the call charge you have set is exceeded during a call or data Add (+) communication, the notification icon Subtract (−)
Page 333: Videophone Message (P
Displaying a Memo Displaying the Settings of Various Functions The contents of a saved memo can be checked. <Application> From the Menu, select [LifeKit] → [Text Memo] and You can directly display the settings of each function press and set each item. For more information about settings, see the relevant pages.
Page 334 Using the Switch to Receive a Call Using the Earphone/Microphone with Switch <Earphone/microphone with switch> When receiving a call, press the switch on the Earphone/Microphone for over a second. When you connect the Flat-plug Earphone/Microphone The beep sounds and the call is connected. with Switch (optional), etc.
Page 335 Receiving a Call Automatically Setting Which Mic to Use with Earphone <Auto answer setting> <Headset microphone> You can set to automatically answer a voice or You can set to use a microphone during a call when the videophone call when the Flat-plug Earphone/ Flat-plug Earphone/Microphone with Switch (optional), Microphone with Switch (optional), etc.
Page 336: Deleting All Saved Data
Setting Whether to Vibrate the Deleting All Saved Data Touch Key When Used <Force reactor> <Reset all data&set> You can set whether to vibrate the Touch Key when you You can delete saved data and reset the settings of pat it. each function to the default settings.
Page 337: List Of Reset Items
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Reset all data&set are as follows. For functions that can be accessed through the menu display, see the list of menus (P.374).
Page 339: Character Entry
Character Entry For kuten codes, see the “Kuten Code List” (PDF format) included in the supplied CD-ROM. You need ® ® Adobe Reader (Version 6.0 or later is recommended) to read the “Kuten Code List” (PDF format). If ® ® Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the...
Page 340: About Entering Text
■ Changing the character mode or pictograph/symbol About Entering Text mode Character mode for half-width The overview of the text entry is described here. Every time you press (Mode), the character mode  Characters including JIS level 1 and level 2, 6,355 kanji are changes in the order of [漢] →...
Page 341: Entering Text
Press to select [健闘] and press Entering Text ＩｎｐｕｔＴｅｘｔＭｅｍｏ健闘 Entering Text in the Prediction Conversion Mode Example: Entering “健闘” (けんとう) ＰｈｒａｓｅＩｔｅｍ Check the character mode in the text input display. のはをにでとですもねしたてから Check that the kanji/hiragana mode is selected. するしただかが...
Page 342: Entering Common Phrases
Press Setting the Movement Method for the ＩｎｐｕｔＴｅｘｔＭｅｍｏ Cursor in the Matching Words List 検討 You can select a movement method for the cursor in the matching words list. From the Menu, select [Settings] → [Application] ＵｓｅｒＣｏｎｖｅｒｓｉｏｎＩｔｅｍ → [Input method] → [Operation in item] and press 健闘見当健投拳闘...
Page 343: Entering Pictographs/Symbols
Select [Input phrases] → a category → a common Editing/Saving Common phrase and press Phrases <Edit common phrases> ＣａｔｅｇｏｒｙＩｎｔｅｒｎｅｔ The preinstalled common phrases can be edited Ｅｍｏｔｉｃｏｎ１Ｅｍｏｔｉｃｏｎ２ according to the intended use. Your own common Ｅｍｏｔｉｃｏｎ３ phrases can also be added as new entries. For the list Ｇｒｅｅｔｉｎｇｓ...
Page 344: Cutting/Copying/Pasting Text
Pasting Text Cutting/Copying/Pasting Text Select the position to paste in the text input display The entered characters can be pasted to the other and press (Func). input display by cutting or copying. The characters cut or copied are saved in the clipboard The Function menu appears.
Page 345: Restoring The Default Settings
Example: Saving a word in the Prediction dictionary Using the Downloaded From the Menu, select [Settings] → [Application] → Dictionary [Input method] → [Edit prediction] and press <Download dictionary> The Prediction dictionary display appears. Up to 20 dictionaries can be downloaded using i-mode To add a word to the User dictionary for use with the FOMA terminal.
Page 346 Sorting the Downloaded Dictionaries When you download several dictionaries, you can change the order of the dictionaries in the list to display words of a frequently used dictionary by priority. Press (Func) in the Dictionary folder display. The Function menu appears. Select [Reorder] and press Select a dictionary and press The Reorder display appears.
Page 347: Network Services
Network Services Available Network Services You can use the following DoCoMo network services on the FOMA terminal. For details on the outline and how to use each service, see the relevant pages indicated in the table below. Monthly Monthly Service name Application Page Service name...
Page 348 Set each item. Using the Voice Mail Service Menu item Operation The Voice Mail Service takes messages for you, as Select [Activate] → [Activate]/[Ring+Activate] Activate※ (→ Enter the ring time) → [Yes]. long as it answers a call with the answering message, ...
Page 349 Notes on the service for the videophone Using the Call Forwarding ● When the Voice Mail Service takes a videophone message Service for you, it is notified to you by SMS. ● To change the settings of the Voice Mail Service for The Call Forwarding Service forwards a voice or videophone support, press the stand-by display and operate as instructed by the...
Page 350 ● To set on/off of the Call Forwarding guidance, press Using the Caller ID Display in the stand-by display and operate as instructed by the guidance. Request Service When you receive a voice or videophone call without Using the Nuisance Call a caller ID, the Caller ID Display Request Service Blocking Service answers the call with a guidance requesting the...
Page 351 Select a language for the guidance played during Using the Dual Network Service incoming calls and press [Japanese]: The Dual Network Service enables you to use a Mova Set the guidance to Japanese. terminal using the phone number of the FOMA terminal [Japanese+English]: you use at present.
Page 352: Setting Remote Control
Selecting an Operation for an Setting Remote Control <Remote Control> Incoming Call during a Call <Arrival Call Act> You can set to be able to operate the Voice Mail or Call Forwarding Service, etc. from a general push-button If you are subscribing to the Voice Mail, Call Forwarding, telephone, public phone, DoCoMo mobile phones, etc.
Page 353 Set each item. ● If you do not yet subscribe to the Multi Number Service, use the FOMA terminal with the Multi Number call set to Item Description [OFF]. Multi Select [ON]/[OFF] of the Multi Number call. ● If the Multi Number call is set to Ｃａｌｌｉｎｇ...
Page 354 Setting 2in1 Using 2in1 You can set the operations such as the Stand-by You can separately use two phone numbers, 2 mail display and Receive avoid. setting by setting the ON addresses, and exclusive modes for each on your for 2in1. FOMA terminal as if you have two terminals.
Page 355 Menu Selecting a Phone Number When Operation item Placing a Call Set call/ To identify the call placed or received using Number receive B, set the font color and ring tone of the incoming/ When the Dual mode is set, you can select a phone receiving call display.
Page 356 Functions Available for Each Mode The funcions which only differ from each mode are listed (the functions which are common with the A mode are excluded). Service A mode B mode Dual mode Voice/video- Call Number A Number B Selectable when placing a call※1 phone call Receive Phonebook Display...
Page 357 Using OFFICEED <OFFICEED> “OFFICEED” is a fixed-rate service within a group provided by IMCS (Indoor Mobile Communication System). You may need to apply separately to use this service.  For more information, see the DoCoMo’s website for business customers (http://www.docomo.biz/d/212/). Saving a New Service to Use It <Additional service (USSD) registration>...
Page 359 PC Connection For detailed information on Data Communication, see the “Manual for PC connection setting” ® ® (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is ® ® recommended) to read the “Manual for PC connection setting” (PDF format). If Adobe Reader ®...
Page 360: About Data Communication
Data Transfer About Data Communication This type of communication is used to exchange data You can use the FOMA terminal for three types of data using the infrared or iC communication or the FOMA communication, packet communication, 64K data USB Cable with Charge Function 01 (optional) and no communication, and data transfer.
Page 361: Before Using Data Communication
Access Authentication for the Use of a Browser Before Using Data Communication When a FirstPass-compatible site that you access through the Internet browser on your PC requires the About the Operating Environment FirstPass (user certificate) as an access authentication, Operating environment of a PC to be used for data install the FirstPass PC software from the supplied communication is as follows.
Page 362: Preparations And Flow Of Data Communication
■ Definition of terms Preparations and Flow of Data ● Administrator Communication An administrator is authorized access to all Windows XP, Windows 2000 Professional, and Windows Vista systems. At least one user with Administrator privilege is set for each The preparations required for performing packet and PC.
Page 363: At Commands
AT Commands Introduction of DoCoMo keitai datalink AT commands are the commands (instructions) that “DoCoMo keitai datalink” software is used to make are executed on a PC for setting and changing the backup files of the Phonebook and mail, etc. to a PC functions of the FOMA terminal.
Page 365: Overseas Use
Overseas Use Overview of International Roaming (WORLD WING) ............364 Services Available Overseas ....................364 Before Using the FOMA Terminal Overseas ..............365 Placing a Call from Your Overseas Location ..............367 Receiving a Call ......................... 368 <3G/GSM setting> Setting the Network to be Used ..............<Network search mode>...
Page 366: Services Available Overseas
Overview of International Services Available Overseas Roaming (WORLD WING) Communication services that you can use overseas are described in the following table. The international roaming (WORLD WING) is a service  Some of the communication services may not be available that enables you to use the same phone number depending on the carrier or network to which you connect.
Page 367 ■ About setting the network services Before Using the FOMA When you are subscribing to the network services, you Terminal Overseas can perform the network service setting/cancellation from overseas, except for some functions. You must check the following items before departure, ...
Page 368 ■ International prefix number for the universal number (Table2) Checks in the Location of Stay The international prefix number for the universal number of each country is as follows (as of August 2007). The FOMA terminal works in a 3G Roaming Area and Area Number Area...
Page 369 If a recipient uses “WORLD WING”, place a call to the  If the Network search mode is set to [Manual], manually recipient as an international call to Japan. switch to the FOMA network (NTT DoCoMo, Inc) or change Press the setting to [Auto].
Page 370: Receiving A Call
Placing a Call to a WORLD WING Setting the Network to be Used Overseas User <3G/GSM setting> If the recipient is a “WORLD WING” overseas user, You can set a communication method to be supported enter the country code “81” and place the call as an in an area or by a carrier you use.
Page 371 [Delete] → [Delete one] → [Yes]. To delete ● As of October 2007, you cannot select a carrier other than all carriers, from the Function menu, select [Delete] → NTT DoCoMo in Japan. [Delete all], enter the Security code, and select [Yes]. ● If “...
Page 372 Setting the Display for International Rejecting an Incoming Call Roaming during Roaming <Operator name display> <Bar Incoming call> You can set whether to display the name of the You can set whether to reject incoming calls during connected carrier in the stand-by display while you are roaming.
Page 373 Using the Network Services Operating the Roaming Guidance Service from Your Overseas Location during Roaming <Oversea service> From the Menu, select [Settings] → [Management] You can use network services such as the Voice → [NW Services] → [Int’l roaming] → [Roaming Mail and Call Forwarding Services from an overseas guide(Int.)] →...
Page 375 Appendix/External Devices/Troubleshooting List of Menus ........................374 Characters Assigned to Keys ..................... 382 Special Symbols ......................... 383 Pictographs ........................383 Emoticons .......................... 384 Common Phrases ......................385 Multiaccess Combinations ....................386 Multitask Combinations ...................... 387 Services Available on the FOMA Terminal ................. 388 Optional and Related Devices ....................
Page 376: List Of Menus
List of Menus  You can press a key on the keypad of the number or symbol next to some menu names listed below in the menu display to execute the associated function. ■ Standard menu ○: The default setting/s is/are restored. ●: Items deleted Reset Reset all...
Page 377 Reset Reset all Menu Default Setting Page settings data&set − i-mode Full Browser Full Browser Check settings P.264 [20] setting − Reset settings − ● Mail Inbox [31] P.189 − ● Outbox [32] − ● Draft [33] − Compose message [34] P.179 −...
Page 378 Reset Reset all Menu Default Setting Page settings data&set Phone Phonebook [51] − ● P.96 Call record [52] − ● P.53 PushTalk phonebook [53] − ● P.82 Record Play rec msg − ● P.72 message Play Vphone msg − ● [54] Set rec msg ○...
Page 379 Reset Reset all Menu Default Setting Page settings data&set LifeKit GPS [9#] GPS settings Loc. request menu Location request: OFF, Host P.234 setting: Initial host, Service ○ ○※1 settings: − Sound/Color setting Position location: P.106 Volume: OFF, Vibrator: OFF, Color: ON Location notice: Volume: 4, Vibrator: OFF, ○...
Page 380 Reset Reset all Menu Default Setting Page settings data&set Settings Call Incoming set Incoming V.phone Link incoming call: OFF, Ring P.102 tone: 着信音1, Ring volume: 4, Incoming image: Kisekae ○ ○ tool※7, Vibrator: OFF, Color: C9:Color9 PushTalk R i n g t o n e : 着信音1 , R i n g volume: 4, Vibrator: OFF, ○...
Page 381 Reset Reset all Menu Default Setting Page settings data&set Settings Application Lifetime Cal. Display setting Photo: P.320 Disp: All, Select folder: i-mode Received mail/Sent mail: ○ ○ D i s p : A l l , S e l e c t m a i l address: None Schedule/Birthday: Disp: All...
Page 382 Reset Reset all Menu Default Setting Page settings data&set Settings Management NW Services Bar Nuisance Calls − P.348 Notify Caller ID − P.44 Caller ID Request − P.348 Call Cost/Duration − P.328 2in1 setting Mode switching: Dual mode, P.352 Stand-by display: B mode: Bモード待受画面...
Page 383 Reset Reset all Menu Default Setting Page settings data&set Settings Management Manner mode ○ ○ P.109 Mode Manner ○ ○ Original manner Vibrator: OFF, Phone volume: S D ( S T E P D O W N ) , M a i l volume/Alar m volume: 4, ○...
Page 384: Characters Assigned To Keys
Characters Assigned to Keys Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys ※ ※ ※ アイウエオあいうえお . @ ／： − ∼ ァィゥェォぁぃぅぇぉか...
Page 385: Special Symbols
Special Symbols  Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■ Full-width symbols ■ Half-width symbols Pictographs  Pictographs may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ...
Page 386: Emoticons
Emoticons When you enter the following words in the kanji/hiragana mode, emoticons are entered.  Some of the following emoticons may be different from those actually displayed.  Emoticons may be displayed in the ImgSym tab rather than in the Pre. tab. Word Emoticon Word Emoticons Word...
Page 387: Common Phrases
Common Phrases Common phrase Category .co.jp .go.jp Internet @docomo.ne.jp .ne.jp http:// .com .or.jp https:// www. .ac.jp Emoticon1 Emoticon2 Emoticon3 Greetings おはようございますお疲れさまでしたおやすみなさいお世話になっております昨日は、どうもありがとうございましたこんにちは行ってきますこんばんはいってらっしゃいよろしくお願い致します直行します本日の会議は中止となりました Business 直帰します出欠をご連絡ください休暇をとります次の指示を待ってください半休します携帯の電源を切ります...
Page 388: Multiaccess Combinations
Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress.  The FOMA terminal may not operate as indicated in the table below depending on its condition. ○: Available ×: Unavailable △: Available depending on the conditions Another event or task Current Voice...
Page 389: Multitask Combinations
Multitask Combinations The table below indicates whether another function is available for each function in the menu.  The FOMA terminal may not operate as indicated in the table below depending on the status of each function.  Some functions may pause temporarily when they are not displayed in the main display even if already activated.
Page 390: Services Available On The Foma Terminal
Services Available on the FOMA Terminal Service Phone number Number guide service (paid: service charge + call charge) (no area code) 104 (Phone numbers of customers who declined to disclose their number information cannot be guided.) Telegram service (paid: telegram fee) (no area code) 115 Time (paid) (no area code) 117...
Page 391: Optional And Related Devices
Optional and Related Devices A variety of commercially available optional devices allows you to expand the FOMA terminal’s capabilities by supporting a wide range of applications, including personal and business uses. Some accessories are only available in some areas. For details, please contact our service counter (DoCoMo shop, etc.).
Page 392: Introduction Of Movie Player Software
Introduction of Movie Player Software To play back a movie (MP4 format file) on a PC, you need QuickTime Player (free) ver. 6.4 or later (or ver. 6.3+3GPP) from Apple Computer, Inc. You can download QuickTime from the following website. http://www.apple.com/jp/quicktime/download/ ...
Page 393 Trouble Cause and Remedy  Check if the Key is locked (P.130). Cannot use the Music Touch Key or Viewing  Check if the Key is available to the function (P.26). Touch Key.  If multiple images are set for the incoming image for voice/ An image other than that you set is displayed for an incoming call.
Page 394: Error Messages
Error Messages  In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Certificate is rejected (tampered)  There are some problems with the certificate.
Page 395 Connection interrupted Could not save Deleted invalid text  The communication is interrupted  Failed to save the image, music  Characters other than digits can- because of an error occurrence data, or i-αppli software. not be accepted for the postal during data communication.
Page 396 Invalid data. Connection cannot be Invalid UIM. Start failed established (400)  Unable to start software because  The host number you set for the information on a UIM inserted ppli stand-by display terminated the Host selection is incorrect. in the FOMA terminal and its cor- due to security error Restore the host number to “iモー...
Page 397 以下の宛先にはメール送信できま Message rejected and cannot be No response せんでした（561） Mails could not sent  Failed to identify a recipient of iC be sent to following address  Failed to send SMS because communication. Check if both △△△ ○○@ .ne.jp sending SMS is rejected.
Page 398 Public mode (Drive mode) Replay period has not yet started  The Public mode is set. Cancel  This file is provided with a time the Public mode and then retry limit on playback. It cannot be Omakase Lock activated the operation (P.66).
Page 399 Set the channel list This certificate has expired. Connect?  Failed to operate because the  The certificate of the site is not yet channel list is not set. Set the valid or has expired. Select [Yes] Same ToruCa exists. Unable to channel list and then retry the op- to connect or [No] to cancel to receive ToruCa...
Page 400 This software is not supported by this Unavailable channel phone  Failed to receive the signal be-  The software you want to down- cause you are in a location without UIM is full load or upgrade does not support the broadcast wave.
Page 401: Warranty And After Sales Services
Warranty and After Sales Services Warranty ● Make sure that the warranty is received with the FOMA terminal upon purchase. Check to be sure that the name of the retailer, date of purchase, and other items have been filled out on the warranty before storing it in a safe place.
Page 402 ◎ Parts stock period The functional parts necessary to repair the FOMA terminal will be basically available for a minimum of six years after the manufacture is discontinued. However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. Note that repair may still be possible depending on the defective portion even if the stock period has expired.
Page 403: Ｉモード故障診断 (I-Mode Trouble Diagnosis) Site
ｉモード故障診断 (i-mode Trouble Diagnosis) Site This website allows you to check by yourself whether some operations, such as sending/ receiving mail and downloading images and melodies, are performed normally on your FOMA terminal. Top page List of test menus page (Only in Japanese) (Only in Japanese) ｉモート゛故障診断...
Page 404: Updating The Software
Updating the Software <Software update> About Updating the Software This function allows you to check if the software update is necessary by connecting to the network for the FOMA terminal and if necessary, download a part of the software using packet communication to update the software. ※...
Page 405 Updating the Software Automatically (Auto-update) Download new software automatically and rewrite old one with it at the previously set time. When the status is changed to be ready to rewrite, “ ” appears. After you check the time of rewriting, you can change the time or select whether to rewrite right away. From the Menu, select [Settings] →...
Page 406 When the Set auto-update is set to [Only notice], the notification icon “ ” (Update notification) appears in the stand-by display. To activate the software update Press (Link) in the stand-by display, select “ ”, and select [Yes]. Ｕｐｄａｔｅｎｏｔｉｆｉｃａｔｉｏｎ ● The notification icon of the SW Update appears only when DoCoMo notifies software update.
Page 407 Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press ＳＷＵｐｄａｔｅＲｅａｄｙｔｏＤｏｗｎｌｏａｄｉｎｇｄｏｗｎｌｏａｄ？Ｎｏｔｉｃｅ：ＣｏｎｎｅｃｔｉｎｇＮｏｆｕｎｃｔｉｏｎｓａｒｅａｖａｉｌａｂｌｅｅｘｃｅｐｔｒｅｃｅｉｖｅｃａｌｌｓ After a while, the software download starts.  When downloading starts, step 2 is performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
Page 408 Reserving a Date/Time for the Software Update (Reserve) If downloading takes too long or the server is congested, you can connect to the server and preset a date/time to start the software update. Example: Reserving the software update on November 14 (Wed) 1:05 a.m. From the screen for selecting the update type, select [Reserve] and press The FOMA terminal connects to the server and displays a list of Ｌｉｓｔｏｆｃｈｏｉｃｅ...
Page 409: Protecting Your Mobile Phone From Harmful Data
Confirming the Reservation From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). Select [Update] and press If the software update is already reserved, the reserved information Ａｌｒｅａｄｙｒｅｓｅｒｖｅｄ...
Page 410 Setting the Scanning Function You can set whether to automatically check data and programs when they are executed. From the Menu, select [Settings] → [Management] → [Scan function] → [Set scan] and press [Scan function] : Set whether to enable the scanning function. Ｓｅｔｓｃａｎ...
Page 411 ● When you update the pattern definitions, your FOMA terminal-specific information (such as model and manufacturer’s serial number) is automatically sent to the server (server for the scanning function under DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than the scanning function.
Page 412 About the Scanning Result Indication If data that can cause a trouble is detected, the warning display appears. ■ Scanning result indication Warning level 0 Warning level 1 Warning level 2 Warning level 3 Warning level 4 ＰｒｏｂｌｅｍｆａｃｔｏｒＰｒｏｂｌｅｍｆａｃｔｏｒＰｒｏｂｌｅｍｆａｃｔｏｒＰｒｏｂｌｅｍｆａｃｔｏｒ...
Page 413: Specifications
Specifications Product name FOMA SO905i Dimensions 110×49×19.7 mm (H×W×D) (when folded) Weight About 134 g (with battery pack attached) Continuous Network 3G/GSM setting stand-by FOMA/ Moving state: About 380 hours time Auto Moving state: About 360 hours Stationary state: About 520 hours Stationary state: About 300 hours Auto Continuous...
Page 414: Number Of Saved And Protected Data Items
Number of Saved and Protected Data Items Number of protected Type Number of saved data items data items Phonebook※1 Up to 1,000 − Schedule Up to 300 − Text memo Up to 10 − Mail Received mail※2 Up to 1,000 Up to 500 (Total number Sent mail※2...
Page 415 ICNIRP: http://www.icnirp.de/ MIC: http://www.tele.soumu.go.jp/e/ele/body/index.htm TELEC: http://www.telec.or.jp/ENG/index_e.htm NTT DoCoMo: http://www.nttdocomo.co.jp/english/product/ Sony Ericsson Mobile Communications Japan, Inc.: http://www.SonyEricsson.co.jp/product/SAR/ (Japanese only) Ministry of Internal Affairs and Communications ** The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment.
Page 416: Fcc Statement
Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population.
Page 417 The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves.
Page 418: Important Safety Information
Important Safety Information AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do “ ” so by airline staff. If your device offers a flight mode or similar feature, consult airline staff as to whether it can be used on board.
Page 419 Index/Quick Manual Index ..........................418 Quick Manual ........................426...
Page 420 Index How to Look up in the Index The index can be used as an “alphabetical table of contents”. Under each headword, terms relevant to it are listed. Not only terms representing function names actually displayed on the FOMA terminal, but also those that are a brief summary about the functions described in this manual. Example: Adjusting the volume of i-αppli software Adjust volume i-αppli ........
Page 421 Adjust EV ......152 Set sub image ...... 274 Compose and send message ... 180 Adjust zoom ......150 Sort ........290 Deco. slcted txt ....181 Attach to mail ....142, 146 Charge ........39 Decorate mail ....... 182 Auto focus ......
Page 422 Image stamp ......267 URL history......260 IC card ........220 Rotate ........269 Window ........ 260 Osaifu-Keitai-compatible i-αppli ... 220 Select size ......269 Window Open Guard ... 264 IC card content ......220 Text stamp ......268 Full Browser setting ... 262, 263, 264 IC card lock .......
Page 423 Word translate ...... 163 Change display ....291 NW setting ......209 i-mode mail ....... 178 Chapter list ......271 Phonebook/Records .... 209 Add receiver ......179 Continuous play ....270 Preinstalled software .... 210 Add to phonebook ....188 Data security ......
Page 424 Security data display ... 320 microSD info ......284 iC transmission ..... 300 List of default settings ..335, 374 Reset file No......156 i-mode bookmark ....302 List of menus ......374 Save ........283 Mark ........302 List of reset items .....
Page 425 Booking list ......247 Receive a call ....... 368 Plus JOG ........26 Booking program ....248 Own number ....... 44 Power .......... 42 Broadcast Storage Area..240 Attach to mail ....... 183 Power saver ......114 Caption disp set ....245 iC transmission .....
Page 426 Record a video ..... 252 Protect ON/OFF ....167 Icon ........30 Record display ......131 Save ........166 Notification display ....32 Record message ......69 URL ........166 Ticker ........175 Delete ........72 Secret Supplied and optional accessories Play ........
Page 427 Delete ........223 Hands-free ....... 51, 75 3G/GSM setting ......368 Display ......... 222 Holding ........66 Duplication check ....225 Incoming set ......102 Edit folder ......223 Missed call ......69 IC act. notice ......225 On hold ........66 IC card lock ......
Page 428 Quick Manual Using the Quick Manual To bring the Quick Manual provided with this manual, separate it at the tear-off line and fold as shown below. You can conveniently bring the Quick Manual “Overseas Use” with you when you are overseas and using the international roaming service (WORLD WING).
Page 435: Manner Mode (P
Don’t forget your FOMA terminal or your manners! When you use the FOMA terminal, be careful not to disturb others around you. Power off the FOMA terminal in the following cases ● When you are in a place where the use is prohibited In airplanes and hospitals, power off the FOMA terminal.
Page 436 NTT DoCoMo Chugoku, Inc. NTT DoCoMo Shikoku, Inc. NTT DoCoMo Kyushu, Inc. Manufacturer: Sony Ericsson Mobile Communications Japan, Inc. Return all spent battery packs to NTT DoCoMo or a dealer, ’07.11 (Ver.1) or a recycling shop to protect the environment. Li-ion 3-277-725-11(1) Printed with soybean oil ink.
Page 437: The Manual
Manual for PC connection setting About Data Communication ............1 Before Using Data Communication..........2 Preparations and Flow of Data Communication ......3 Connecting the FOMA Terminal to a PC ........3 Installing the FOMA Communication Configuration Files .....4 About the FOMA PC Setup Software ...........6 Setting Communication Using the FOMA PC Setup Software (When Using Windows XP/Windows 2000 Professional) ..7 Setting Communication Using the FOMA PC Setup Software...
Page 438: About Data Communication
Precautions on Use About Data Communication Usage Fee of Internet Service Provider You can use the FOMA terminal for three types of data communication, packet communication, 64K data When you use the Internet, a usage fee is required for communication, and data transfer. your Internet service provider.
Page 439 Other Necessary Items Conditions of Packet and 64K Data Communication Other than the FOMA terminal and a PC, the following The following conditions are necessary to perform hardware and software are necessary. communication using the FOMA terminal.  FOMA USB Cable with Charge Function 01 (optional) or - The FOMA USB Cable with Charge Function 01 (optional) can FOMA USB Cable (optional) be used on your PC.
Page 440: Preparations And Flow Of Data Communication
Preparations and Flow of Data Connecting the FOMA Terminal Communication to a PC The preparations required for performing packet and Connect the FOMA terminal to a PC when they are 64K data communication by connecting the FOMA powered on. terminal to a PC are given below. ...
Page 441: Installing The Foma Communication Configuration Files
When Using Windows 2000 Professional Installing the FOMA Communication Configuration Files Set “FOMA SO905i CD-ROM” in the CD-ROM drive of the PC. To connect the FOMA terminal to a PC using the FOMA USB Cable with Charge Function 01 (optional) and perform data communication, install the FOMA communication configuration files from this CD-ROM.
Page 442 When Using Windows Vista Checking the Installed FOMA Communication Configuration Files Set “FOMA SO905i CD-ROM” in the CD-ROM drive of the PC. Confirm that the FOMA communication configuration files are installed properly.  You need to connect the FOMA terminal and PC using the FOMA USB Cable with Charge Function 01 (optional) beforehand.
Page 443: About The Foma Pc Setup Software
Uninstalling the FOMA About the FOMA PC Setup Communication Configuration Files Software  A user with Administrator privilege can uninstall the software. To connect the FOMA terminal to a PC and perform  Before starting uninstallation, make sure to disconnect the p a c k e t o r 6 4 K d a t a c o m m u n i c a t i o n , v a r i o u s FOMA terminal from the PC.
Page 444: Setting Communication Using The Foma Pc Setup Software
Click [次へ]. Setting Communication Using the FOMA PC Setup Software The Terms of Use for the FOMA PC setup software (When Using Windows XP/Windows 2000 Professional) appears. Check the contents and click [はい] to accept the Installing the FOMA PC Setup terms.
Page 445 Click [スタート] → [設定] → [コントロールパネル] and (P.3, 5). then double-click [アプリケーションの追加と削除]. Example: When using Windows XP Select [NTT DoCoMo FOMA PC設定ソフト] and Click [スタート] → [すべてのプログラム] → [FOMA click [削除]. PC設定ソフト]. Check the name of the program to be deleted and click [はい].
Page 446 Click [OK]. Easy Setup (Packet Communication)  When you performed the optimization in step 7 to 8, you  Note that packet communication could be expensive if you need to restart the PC. exchange large volumes of data such as viewing sites or Internet home pages that contain images or downloading When Using Other Providers files.
Page 447 Click [追加] and set a host (APN) and click [OK]. Easy Setup (64K Data Communication) Set 2 or a number between 4 and 10 for cid. When Using “mopera U” or “mopera”  Note that 64K data communication could be expensive if it is performed for a long period of time.
Page 448 Check the setting information and click [完了]. When Using Other Providers Click [OK]. Start the FOMA PC setup software and click [かんたん設定]. Starting the Communication You Just Select [64Kデータ通信] for the connection type and Finished Setting Up click [次へ]. Select [その他] for the host and click [次へ].
Page 449: (When Using Windows Xp/Windows 2000 Professional)
Select the dial-up connection to be optimized and Disconnecting Communication click [実行]. Sometimes, closing the Inter net browser does not disconnect communication. To ensure the disconnection of communication, perform the following procedure. Click the dial-up icon in the task tray. Click [切断].
Page 450: Setting Communication Using The Foma Pc Setup Software (When Using Windows Vista)
Select [FOMA HIGH-SPEED対応端末（受信最大 ● The host (APN) is information that must be saved in the FOMA terminal. When you use the PC with a different 3.6Mbps） ] or [FOMA端末（受信最大384kbps） ] and FOMA terminal connected, it is required to save it again in click [最適化を行う].
Page 451 Click [続行]. Select [NTT DoCoMo FOMA PC設定ソフト] and click [アンインストール]. Click [次へ]. The Terms of Use for the FOMA PC setup software appears. Check the contents and click [はい] to accept the terms. When you click [いいえ] Installation is canceled.
Page 452 When Using Other Providers Easy Setup (Packet Communication)  Note that packet communication could be expensive if you Start the FOMA PC setup software and click [かん exchange large volumes of data such as viewing sites or たん設定]. Internet home pages that contain images or downloading files.
Page 453 Click [追加] and set a host (APN) and click [OK]. Easy Setup (64K Data Communication) Set 2 or a number between 4 and 10 for cid. When Using “mopera U” or “mopera”  Note that 64K data communication could be expensive if it is performed for a long period of time.
Page 454 Check the setting information and click [完了]. When Using Other Providers Click [OK]. Start the FOMA PC setup software and click [かんたん設定]. Starting the Communication You Just Select [64Kデータ通信] for the connection type and Finished Setting Up click [次へ]. Select [その他] for the host and click [次へ].
Page 455: Setting Communication Without The Foma Pc Setup Software
● The host (APN) is information that must be saved in the Disconnecting Communication FOMA terminal. When you use the PC with a different Sometimes, closing the Inter net browser does FOMA terminal connected, it is required to save it again in the new FOMA terminal.
Page 456 Enter a dummy (nonexistent) phone number (such Setting ON/OFF for the Notify Caller ID as “0”) at [電話番号], select [FOMA SO905i] at [接続方法], and click [OK]. The caller ID is important personal information. Carefully decide whether you want to notify a recipient The connection window appears.
Page 457 Enter a host number at [電話番号] and click [次へ]. Click the [ネットワーク] tab, check each item, and click [設定].  Select [PPP:Windows 95/98/NT4/2000, Internet] for [呼び出すダイヤルアップサーバーの種類].  Put a checkmark only for [インターネットプロトコル (TCP/IP)] at [この接続は次の項目を使用します]. Since you cannot change [QoSパケットスケジューラ], leave it as it is.
Page 458 Check whether [インターネットへの接続に使うモ Select the created host icon and then click the [ファデムを選択する] is set to [FOMA SO905i] and click イル] menu → [プロパティ]. [次へ]. Check each item of the [全般] tab.  This window may not appear on some operating ...
Page 459 Check each item of the [全般] tab. When Using Windows Vista  When multiple modems are connected to a PC, put a Click [スタート]→[接続先]. checkmark only for [モデム - FOMA SO905i] at [接続の方法]. Click [接続またはネットワークをセットアップし  Remove the checkmark from [ダイヤル情報を使う]. ます].
Page 460: At Commands
■ Input mode of AT commands Performing the Dial-up Connection To operate the FOMA terminal using AT commands, set Connect the FOMA terminal to a PC before starting this the PC to the terminal mode. operation. The terminal mode is used for operating a PC as a communication terminal.
Page 461: At Command List
AT Command List AT commands that can be used for FOMA SO905i are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value. Command Outline/Parameter Input example...
Page 462 Command Outline/Parameter Input example AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service) AT+CGEQMIN=2,,64,384 notified from the network when packet communication is established. AT+CGEQMIN=2,,64 AT+CGEQMIN=2,,,384 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGEQMIN= ※1 packet communication AT+CGEQMIN=<cid>...
Page 463 Disconnects packet or 64K data communication. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communication.
Page 464 Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
Page 465 ■ Extended result codes List of Reasons for Disconnection ● &E0 ■ Packet communication Displays the connection speed between the FOMA terminal and the base station. Value Reason Numeric value indication Text indication Connection speed An APN is not found or is incorrect. CONNECT 32000 32,000bps Disconnected from the network.
Page 466: Kuten Code List
Kuten Code List ’07.11 (Ver.1) A-CUB-100-11(1)
Page 467 In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).

NTT docomo FOMA SO905i 07.11 User Manual

Table of Contents

Before Using the Handset

Pushtalk

Sound/Display/ Light Settings

I- Α Ppli

Osaifu-Keitai/Toruca

Full Browser

Music&Video Channel/ Music Playback

Character Entry

PC Connection

Appendix/External Devices/Troubleshooting

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for NTT docomo FOMA SO905i 07.11

Summary of Contents for NTT docomo FOMA SO905i 07.11