NTT docomo FOMA N702iS Manual page 5

This manual uses illustrations and marks to explain how to operate the function so that you can
use the FOMA terminal correctly.
Describes the
operation on each
step.
Describes the
screen at the time
of the operation.
Compare it with
the screen when
you operate.
Describes the
items displayed on
the screen (some
items cannot be
operated
depending on the
setting).
Describes the
explanation and
operation of each
item.
* The contents and page numbers above differs from
the actual ones in this manual.
• The screens shown as examples in this manual are displayed when "English" is set for " バイリンガ
ル " (Select language). Set "English" for "バイリンガル " (Select language) in advance.→ P.49
• In this manual, "OFF" is set to the "Stand-by display" in order to make the screens clear. Also, the
parts of the operating instruction screens that need an explanation are closed up.
• Various contents including standby screen are set according to the color of the FOMA terminal. In this
manual, "Mineral Water" settings are basically used as examples.
• The contents displayed on the FOMA terminal may differ from those on this manual depending on the
settings you made after purchase.
• The screens inserted in this manual are only the images, which may look different from the actual screens.
Describes the
function name.
<Alarm clock>
Using the FOMA Terminal as an
Alarm Clock
Default setting OFF
● You can store up to 3 alarm settings.
i44
1
The "Alarm clock screen" appears.
If you have set the alarm clock
Ａｌａｒｍ ｃｌｏｃｋ
before, the details of the last
Ａｌａｒｍ ｃｌｏｃｋ１ ＯＦＦ
setting are displayed.
Ａｌａｒｍ ｃｌｏｃｋ２ ＯＮ
１２：００
Ａｌａｒｍ ｃｌｏｃｋ３ ＯＦＦ
Ｅｄｉｔ Ｓｅｌｅｃｔ ＦＵＮＣ
Alarm clock
Function menu P.303
o
2 Highlight an item to be set
(Edit)
Select any item:
3
Time setting ......Enters the time at which the
alarm will sound.
Repeat......Sets the number of alarm clock
repetitions.
1 time......The alarm sounds only once.
Daily ( )......The alarm sounds every day.
Select day ( ) ......The alarm sounds every
week on the specified day.
c o
Use to select a checkbox (□) (Finish)
Alarm tone ......Selects the alarm tone from the
Melody folder or i-motion. → P.266, 277, 288
You can select "Clock Alarm Tone" in the Pre-installed
folder of Melody.
Select "OFF" to disable alarm tone.
Volume......Sets the alarm tone volume.
c
Adjust the alarm tone volume with
"Adjusting the Ring Volume"→ P.73
Snooze setting......Specifies whether a snooze
(repeating) alarm is set or not.
ON ......The alarm tone for 1 minute repeats up to
6 times at about 5-minute intervals.
OFF...... Enter a ringing time (01-10 minutes in
2 digits)
To use the displayed time, press d (Set).
......Specifies whether the FOMA
Auto power ON
terminal is automatically turned on or not when the time
for an alarm is reached.
Describes the settings at the time of purchase
or contact or whether the subscription of the
function or service is required or not.
Alarm stop setting ......Selects how to stop the
alarm. "How to stop the alarm tone"→ P.310
Stop by shaking......The alarm stops by shaking
the FOMA terminal.
* The vibrator is set to "OFF" during the alarm
notification.
Stop by operating ......The alarm stops by
pressing any key.
o(Finish)
4 Set the respective items
N
When the FOMA terminal is automatically turned on to notify
you of an alarm, if you set a melody or i-motion downloaded
from sites for alarm tone, The "Alarm tone" is played due to
the FOMA card operational restriction function.
When an i-motion is selected for the "Alarm tone" and sounds
as a snooze alarm, the video is not played while the alarm
pauses.
Before entering an area such as an aircraft or hospital where
there is electronic equipment that uses extremely precise
control systems or very low signal levels and the use of
mobile phones is prohibited, set the "Auto power ON" setting
to "OFF" and then turn the FOMA terminal off.
Alarm clock screen
p
Alarm clock screen (P.303)
1
(FUNC) Select any item:
Edit......Edits the Alarm clock.
Display detail......Changes to the detail display when
the list display is displayed.
Release this......Disables one Alarm clock.
Release all......Disables all Alarm clocks.
Continued on next page 303
Describes the
necessary
settings, notes or
useful information
about the function.
The function menu
title is described
with the icon of
the function menu
and the screen
name on which the
function menu is
displayed.
You can search
the chapters using
the index.
Indicates that the
descriptions go on
to the next page.
Page number
3