NTT docomo FOMA N702iS Manual page 112

<Utilities/Group utilities>
Setting up Phonebook Utilities
The utilities allow you to specify settings such as which answer message is used by the Record message
function and which ring tones are used for each group or for each phone number or e-mail address in the
phonebook. You can distinguish callers only by the ring tone.
You can set the following Utilities functions:
Receiving To identify calls from specific
callers using tones, vibration, etc.
To change the answer message used when Record message starts up
depending on the caller
To identify mail from specific
senders using tones, vibration,
etc.
To set the "Chara-den" character used for videophone calls depending on
the other party
Sending To set the connection speed used for videophone calls depending on the
other party
● You cannot set the utilities for "Group 00" on the FOMA terminal (Phone) or the phonebook or groups on the FOMA
card (UIM).
● You cannot set the utilities for the phonebook stored as the secret data.
● The "Utilities" functions will only work if the caller provides a caller ID (phone number). You should always use the
"Caller ID request" service. → P.331
Phonebook entry detail screen (P.106), Group setting
1
screen (P.104)
The "Utilities setting screen" appears.
A star " ★ " appears next to the selected function.
■ To deselect the selected function
Select the function indicated by the star " ★ "
The function is deselected and the star " ★ " disappears.
Select any item:
2
tone......"Changing the FOMA Terminal's Ring Tone" → P.114
Ring
Vibrator......"Setting the Vibration to Notify You of Incoming Calls" → P.116
Illumination......"Setting the Flashing Mode for the Incoming Calls" → P.128
Image......"Changing the Display" → P.121
message......"Having the Caller Leave a Message" → P.79
Answer
tone......"Changing the FOMA Terminal Ring Tone" → P.114
Mail ring
Mail vibrator......"Setting the Vibration to Notify You of Incoming Calls" → P.116
Mail illumination......"Setting the Flashing Mode for the Incoming Calls" → P.128
Dialing speed......Selects the connection speed used for videophone calls from "64K/32K".
Chara-den setting......Selects Chara-den to be displayed as the substitute image for videophone calls.
110
Purpose
Identify using ring tones
Identify using vibration
Identify using incoming call lamp color
Identify using image or movie
Identify using ring tones
Identify using vibration
Identify using incoming call lamp color
p(FUNC)
"Utilities"
Default setting
Function
Ring tone
Vibrator
Illumination
Image
Answer message
Mail ring tone
Mail vibrator
Mail illumination
Chara-den setting
Dialing speed
Ｕｔｉｌｉｔｉｅｓ
Ｒｉｎｇ ｔｏｎｅ ★
Ｖｉｂｒａｔｏｒ
Ｉｌｌｕｍｉｎａｔｉｏｎ
Ｉｍａｇｅ
Ａｎｓｗｅｒ ｍｅｓｓａｇｅ
Ｍａｉｌ ｒｉｎｇ ｔｏｎｅ ★
Ｍａｉｌ ｖｉｂｒａｔｏｒ
Ｍａｉｌ ｉｌｌｕｍｉｎａｔｉｏｎ
Ｄｉａｌｉｎｇ ｓｐｅｅｄ
Ｃｈａｒａ−ｄｅｎ ｓｅｔｔｉｎｇ
Utilities setting (Phonebook)
All OFF
Ｓｅｌｅｃｔ