NTT docomo FOMA N702iS Manual page 278

● Adding frames
● You can use the downloaded frames in addition to the
pre-installed ones (P.166).
Edit image screen (P.275)
1
(FUNC) "Frame"
The image is displayed in the selected frame.
Use v to change to another frame.
■ To cancel the selected frame
o(Cancel)
N
The orientation of the downloaded frame is portrait or
landscape. The image can be framed only if the size and
orientation of the frame are the same as those of the image.
If the size of the image that has been trimmed or resized is the
same as that of the frame, the image can be framed. The
quality of the resized and framed image may deteriorate.
● Pasting marker stamps
● You can use the downloaded marker stamps in
addition to the pre-installed ones.
● You can rotate, enlarge or reduce marker stamps.
● Refer to P.362 for the pre-installed "Marker stamps".
Edit image screen (P.275)
1
(FUNC) "Marker stamp"
marker stamp
■ To edit a marker stamp
p(FUNC) Select any item:
90° to right ......Rotates the marker stamp 90°
clockwise.
......Rotates the marker stamp 90°
90° to left
counterclockwise.
180°......Rotates the marker stamp 180°.
Scale up......Doubles the size of the marker stamp.
Scale down......Reduces the size of the marker stamp
half.
Adjust the marker stamp with b
2
d (Put)
■ To paste another marker stamp
o(Add) Repeat steps 1 to 2
276
p
Select a frame
p
Select a
Ｃａｎｃｅｌ Ｐｕｔ ＦＵＮＣ
N
You can only use downloaded stamps of 240 dots wide × 240
dots high or smaller. Larger stamps are handled as GIF
images.
You can repeatedly enlarge or reduce a marker stamp.
You cannot enlarge the marker stamp bigger than the edited
image size. You also cannot reduce the width or height of the
marker stamp to less than 1 dot.
● Pasting character stamps
Default setting Character color: Black Font: Gothic style
Character size: Standard size
● You can enter up to 3 to 15 full-pitch or 6 to 30 half-
pitch characters as a stamp. The number of
characters that can be entered differs depending on
the image size and character size.
● You can change the character stamp color, font and
size.
1 Edit image screen (P.275)
(FUNC) "Character stamp"
the text
■ To edit a character stamp
p(FUNC) Select any item:
Character input......Enters the text.
......Sets the color of the character
Character color
stamp.
Use b to select the color
To use another color palette, press o(Change).
Font......Selects the font form "Gothic style/Pop style".
......Selects the character size from
Character size
"Enlargement size/Standard size/Reduction size".
Adjust the character stamp with b
2
d (Put)
N
The font thickness is specified in the "Font" setting (P.130).
p
Enter
Ｍｙ ｄｏｇ
Ｐｕｔ ＦＵＮＣ