NTT docomo FOMA N702iS Manual page 444

Check the setting information
7
and click " 完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "戻る " (Back).
Click "OK"
8
Execute communication.→ p.24
Easy settings: "Specifying 64K communication settings
using other providers"
Click " かんたん設定 " (Easy settings)
1
Select "64K データ通信 " (64K data communication) and click " 次へ "
2
(Next)
Select " その他 " (Other) and click " 次へ " (Next)
3
Enter the dial-up information
4
and click " 次へ " (Next)
Register the following items in order to connect
to a service provider with ISDN synchronous
64K access points other than mopera U or
mopera when creating a dial-up;
• " 接続名 " (Connection name) (optional)
• " モデムの選択 " (Modem Selection) (FOMA
N702iS)
• Phone number
You cannot use the following reserved
characters: ¥/:＊ ?!<> │ (half-pitch only).
Enter the correct information according to the
provider information. Enter the correct, case-
sensitive phone number in half-pitch.
If "発信者番号通知を行う " (Notify Caller ID) is
checked on, the Caller ID will be notified when
communication is carried out.
To specify advanced settings (TCP/IP settings)
Clicking "詳細情報の設定 " (Detailed settings) displays the setup screen for "IP address" and
"Name server". If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
23