NTT docomo FOMA N702iS Manual page 442

Confirm the Access point (APN) on "接続先（APN）の選択 " (Select
8
the access point (APN)) and click " 次へ " (Next)
To specify advanced settings (TCP/IP settings)
Clicking "詳細情報の設定 " (Detailed settings) displays the setup screen for "IP address" and
"Name server". If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
Select the user
9
When " すべてのユーザー " (All users) is
selected, the connection setting is applied to all
the users registered in Windows.
Specify a user name and
10
password and click "次へ" (Next)
When setting the user name and password,
input the correct, case-sensitive data provided
by the service provider.
Check " 最適化を行う " (Optimize the setting) and click " 次へ " (Next)
11
Optimize "W-TCP 設定 " (W-TCP settings) required for "Packet communication". If they are already
optimized, this screen does not appear. Proceed to Step 12.
Check the setting information
12
and click " 完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "戻る " (Back).
Click "OK"
13
You need to restart the PC to enable the changes in the settings. If the restart selection screen
appears, click "はい " (Yes).
Execute communication.→ p.24
21