* The URL and contents are subject to change without prior notice. In this "F-01E INSTRUCTION MANUAL", "F-01E" mobile terminal is usually referred to as "FOMA terminal". The images or illustration used in this manual are examples. They may differ from the actual displays.
Part names and functions Part names of F-01E and major functions assigned to each part are as follows.
Page 5
Back cover Silent mode s (Multitask key) Start another function during To access docomo mini UIM card slot and the a call or operation, or activate/cancel Privacy view microSD card slot, remove the back cover and the battery pack.
(Side key) Light sub-display, switch display Z (Side camera key) Activate movie shooting, Open assist button record video during 1Seg watching SD Adjusting volume S stops ring alert, alarm, vibrator or activates The FOMA terminal can be opened easily only by , D conducts mail/message quick message pushing the dedicated button.
Because your FOMA terminal uses radio waves SSL/TLS. to communicate, it is possible that a third party Neither DOCOMO nor the certifier as listed may attempt to tap your calls. However, the W- herein makes any representation and warranty CDMA, GSM/GPRS automatically applies a as for the security in the use of SSL/TLS.
Precautions contain the description below. WARNING may result from Handling FOMA terminal, battery pack, adapter, improper use. desktop holder and docomo mini UIM card (common) ..............7 This sign denotes that Handling FOMA terminal ..........8 minor injury or damage Handling battery pack ..........10...
Use the battery pack and adapter Turn FOMA terminal OFF. Remove the battery pack from FOMA specified by NTT DOCOMO for your terminal. FOMA terminal. May cause fire, burns, injuries, electric shock. May cause fire, burns, injuries, electric shock.
Do not put foreign objects such as liquid May be accidentally swallowed or cause like water, metal pieces or burnable injuries. things into docomo mini UIM card or Don’t Be careful especially when using FOMA microSD card slot. terminal connected to the adapter May cause fire, burns, injuries, electric shock.
Page 11
When you talk by setting handsfree or When the display or camera lens is ring alert is sounding, keep FOMA accidentally broken, be careful of terminal away from your ear. broken glass or exposed internal parts And, when connecting the earphone/ of FOMA terminal.
Handling battery pack If the display part is accidentally broken and the liquid crystal leaks out, do not Check that the battery type matches the type make the substance contact with your Don’t displayed on the battery pack label. skin of face or hands. Display Battery type May cause loss of sight or skin problems.
Do not touch the a sales outlet such as docomo Shop. If your local Don’t charging jack with a part of your body municipality has a battery recycling program, such as your hand or finger.
Unplug Wipe off any dust that accumulates on May cause fire, burns, electric shock. the power plug. Handling docomo mini UIM card May cause fire, burns, electric shock. When you connect the AC adapter to an CAUTION outlet, firmly connect to the outlet.
Handling mobile phones near When electronic medical equipment electronic medical equipment other than implanted pacemakers or defibrillators are in use outside of These precautions are based on the guidelines medical facilities (such as in home care produced at the Electromagnetic Compatibility settings), check with the device Conference Japan, regarding the protection of manufacturer to determine how the...
Page 16
Desktop Holder F33 Surface Part Material treatment Surface Part Material Camera lens, camera Acrylate resin UV hard coating treatment panel Exterior Upper case ABS resin None Light lens part Acrylate resin Engraving case Lower case ABS resin None Side keys PC resin UV hard coating Front hook...
Clean the jack occasionally with a dry cotton swab your FOMA terminal. etc. - If the data is deleted, DOCOMO assumes no - If the jack is soiled, connection gets worse and it may responsibility for the loss of any data.
Do not leave FOMA terminal with the camera in areas Battery pack under strong direct sunlight. - May cause discoloring or burn-in of elements. The battery pack is a consumable part. Use FOMA terminal with the external connection jack - Replace the battery pack if FOMA terminal has cap closed.
To preserve the environment, bring the old docomo regulations of the country/region to use it. mini UIM card to a sales outlet such as docomo Shop. To use in airplane, confirm with airline company in Take care not to scratch, touch accidentally or short advance.
Page 20
To use in airplane, confirm with airline company in Wireless LAN (WLAN) advance. Wireless LAN (WLAN) exchanges information using Cautions on using 2.4GHz devices radio waves, and allows you to freely establish LAN In the bandwidth used by WLAN devices, in addition to connection if you are within an area where radio wave home electric appliances such as a microwave oven and reaches.
Page 21
FeliCa reader/writer CAUTION FeliCa reader/writer function of FOMA terminal uses Do not use a remodeled FOMA terminal. Using a weak waves requiring no licenses for radio stations. remodeled terminal violates the Radio Law. It uses 13.56 MHz frequency band. When using other FOMA terminal is certified according to technical reader/writers in your surroundings, keep FOMA standard conformance of specified wireless...
3 minutes using water nozzle in 6.3 mm inner diameter. swimming pool or soak in water of swimming *2 For F-01E, IPX8 means that a phone keeps pool, wash it in specified procedure ( P23). You can use FOMA terminal in a bathroom.
Page 23
DOCOMO takes the FOMA terminal to replace the parts as a chargeable service. Bring FOMA terminal to a sales outlet such as a DOCOMO-specified repair office. After using the external connection jack, close the cap as the direction shown in the illustration, and make sure that the cap is completely closed without slack by pushing the tabs in.
Page 24
( P20) (e.g., such water flow that gives you pain when applied to your skin directly from a damaged or deformed, replace it at DOCOMO- faucet or shower). F-01E provides IPX5 specified repair office.
Page 25
Washing FOMA terminal Draining water from FOMA terminal With pressing and holding the external connection jack cap not to open, wash the When FOMA terminal is wet, water may flow out terminal in tap water without rubbing hard after wiping it off; drain the water in the following steps.
Page 26
c Press lightly the FOMA terminal against dry, Charging clean cloth etc. about 10 times to wipe off water remaining in the microphone, earpiece, Check the following before and after charging. speaker, keypad, hinges or charging jack, etc. Check if FOMA terminal is not wet. Never try to charge the battery pack when FOMA terminal is wet.
Page 27
UIM card With facing IC side of the docomo mini UIM card down, Slide the lever in the c insert to the slot slowly and push it until it clicks...
Page 28
Before Using Charging The battery pack does not have a full charge at time of purchase. Use AC adapter for FOMA terminal to charge the battery before using FOMA terminal. Charging using desktop holder Insert the connector of AC adapter AC adapter AC 100V horizontally to the accessory desktop...
Before Using Before Using Power ON - Default setting Caller ID notification Initial setting is an operation when FOMA terminal Set whether to notify your phone number (caller is turned ON for the first time. ID) to the other party's terminal when making a voice call.
Page 31
bUpdate notification of MyFACE : High-pitched alarm is "ON" : Kid-safe mode ON cPedometer/ACT monitor : During i-αppli operation : i-αppli call exists Steps and activity amount of the day are : Communication mode ON (USB cable displayed. connected) d Machi-chara : Alarm is set : 1Seg watching/recording reserved or alarm Characters moving about the screen and giving...
Screen Explanation Basic operations for screen and keys Menu operation Guide area On the stand-by display, press m and then Operations that Guide area perform the functions from the menu. You can can be select a menu item with shortcut operations, performed by pressing m, which use the keypad, etc.
Screen Explanation Screen Explanation docomo Palette UI (Guide) You can check outline of function, operations or MyFACE troubleshooting. (In Japanese only) In the right and left area of the stand-by display, mef Toole# GuideeSelect a up to 12 MyFACEs downloaded from sites, etc.
Character Entry Entering characters Operations during character entry 5-touch input and conversion Returning to the previous character : n 5-touch input is an input method to switch a Deleting characters : c character by pressing a key repeatedly. Adding voiced/semi-voiced sound or switching upper/lower case : * Enter character on the character entry screen...
Entering smileys Text input m [Submenu]ed Quote phrase/ Set a text input method or operation during text datae0 Pict/Symbol/Smileyec entry. SmileyeSelect a smiley typeeSelect a meh Settinged Text display/ smiley inputec Text inputea Text input Copying/Cutting, pasting characters methodeSet required itemseC m [Submenu]ec [Set] Copy/Cut/etc.e...
Sound/Screen Setting Sound settings You can set tones, such as changing a ring alert, Silent mode adjusting the volume, or muting the sound emitted from FOMA terminal. This function mutes the sound emitted from the FOMA terminal such as ring alert, Keypad sound, Ring tone open/close operation sound, Alarm sound, confirmation sound for reading a code with Bar...
Sound/Screen Setting Setting display Stand-by display setting Privacy view You can change the default stand-by display. This function allows the display to be less-visible to the people around you. You can start/cancel on <Example> Setting an image the screen other than the stand-by display. meh Settingea Screen/Display s (1 sec.
Sound/Screen Setting Setting Machi-chara Kisekae Tool You can set a character to be displayed on the stand-by display. A message can be changed to You can set the stand-by display, menu, incoming/ the speech in Machi-chara talk expression. You outgoing call screens, etc. at once with a can also use Friendly message support Machi- predefined combination.
Sound/Screen Setting Sound/Screen Setting Light setting eco mode Save the battery power by adjusting the display Indicator light backlight or sound temporarily. You are notified of missed call or unread mail meh Settingeg Batteryea eco (including SMS) by the indicator light. mode settingea eco mode ON/OFFe meh Settingea Screen/Display...
OFF. (At subscription : 0000) Network security code You can set 2 security codes to the docomo mini (At subscription : Set any code) UIM card: PIN1 code and PIN2 code. The PIN1 code is a security code to be used when...
Page 41
(a drivers license etc.) to [Save] identify your subscription, the FOMA terminal and the docomo mini UIM card to a docomo Point Shop. For details, contact "General Inquiries" To display the PIN1 code entry screen when turning on the last page of this manual.
Each time the FOMA terminal is folded, keys are locked. But the side key operations are available * Omakase Lock can be set/canceled from My when the FOMA terminal is folded. docomo site using a PC etc. (in Japanese only) mehfaaaeAuthenticatee Activate : Set required itemseC...
Lock/Security Lock/Security Incoming call restriction Resetting to default Call rejection setting Reset Call reject setting allows you to reject calls from You can restore functions in red characters on the phone numbers not saved in phonebook and menu list to the default settings. reject or accept calls from the specified numbers.
Page 44
From Show all names : meaaeIn the Call type field bea Point From other search : I DOCOMO videophone specifications conform to "3G-324M, an international standard prepared by 3GPP". The connection with the videophones of different specifications cannot be established.
It is set to on by CALL" at the time of subscription to the FOMA service (Unless you request not to subscribe to it). default). For details, refer to NTT DOCOMO No subscription or monthly charges apply. website.
Call Telephone Call Telephone Operation during a call Receiving a call/videophone call Receive You can use useful functions during a call. You are notified of an incoming call with ring On hold alert, light alert, etc. On the display, the phone number appears when caller ID is sent, and A melody is played while on hold.
Call Telephone When you cannot answer a call Record message Public mode When Record message is set to "ON", a greeting Public mode is an automatic answering service message is played and the caller can record message putting emphasis on manners in a highly public when you cannot answer the call.
Call Telephone Network Services Setting network service Monthly Service Application charge The operations for major network services are as Voice Mail Service Required Charged follows. Missed Call Notification Not required Free Service Operating procedure Service meg TEL functione* Voice Voice Mail Call Waiting Service Required Charged Service...
Call Telephone Emergency call You can make the following emergency calls from When calling to 110, 119 or 118 from the FOMA the FOMA terminal. terminal, inform them that you are calling from a mobile phone and give your phone number Police and your current location precisely since the Fire and ambulance...
× Packet communication (PC mode using network of telecommunications connection) carriers affiliated with DOCOMO overseas. Before *1 International settings of i-mode are required. using this service, check its subscription status. *2 When you send SMS to FOMA terminal, enter For details, contact "General Inquiries" on the last the party's phone number as well as in Japan.
When you enter a number within 2 digits to call Making a call from the country overseas, a screen asking for selecting "Quick dial" or you stay "Call" appears. If you select "Quick dial", the call is made to the other party in memory No. If you select You can make a voice call or videophone call from "Call", the call is made as it is (used for emergency overseas using international roaming service.
Adding addresses : On the mail creation screen, select countries and overseas network operators "<No address>" available, refer to "Mobile Phone User's Guide [International Services]" or DOCOMO Attachments International Services website. You can attach up to 10 files and up to 2 MB of aeg Compose new SMSeEnter a image or moving picture/i-motion, etc.
Page 53
Mail Deco-mail/Decome-Anime Deco-mail Decome-Anime You can change a font size or background color, or You can create more expressive Deco-mail using insert still images, Deco-mail picture or Deco-mail templates made with Flash graphics. pict. aee Create new Decome- <Example> Specifying decoration before entering Animee"Edit"...
Mail Receiving i-mode mail No specific operations or settings are required for Point receiving mails (mail automatic reception). By selecting a mail and then pressing C, you can Receive i-mode mails reply easily using stored common phrases (Quick reply). Blinking Checking new mail/message You can make inquiry for any i-mode mail or MessageR/F delivered while you were out of service...
Mail Phonebook Early warning "Area Mail" Phonebook new entry This is a service that you can receive emergency There are two phonebooks: the FOMA terminal earthquake flash report etc. delivered by the phonebook and the UIM phonebook. Meteorological Agency. i-mode subscription is <Example>...
"English". If you attach a docomo mini UIM card except yours or turn ON the FOMA terminal without Displaying web pages docomo mini UIM card, still images/i-motion/...
Viewing and operating screen Bookmark You can bookmark frequently visited sites or Status, title/URL websites to quickly display them the next time you want to visit. Saving : When a site or website is displayed, m [Submenu]eabe"OK"eSelect a saving Pointer folder Displaying : mebbeSelect a foldereSelect a bookmark...
The site is connected and the detail channel list. information appears. Basic Channel The channel is provided by DOCOMO, and the Point packet communication fee for automatically When the detail information of i-channel is updating the distributed information is not displayed, the same operations as the ones when i- charged.
You can start GPS compatible i-αppli to display high-precision location surveying GPS. maps after positioning location or navigate. DOCOMO is not liable to any purely economic mei Map/Overseasea Map damages including troubles, if any, caused by b Navigation...
Page 60
To use AUTO-GPS services that work with i- (approximately once in every 5 minutes), which concier or services provided by DOCOMO, set allows you to services that deliver information whether to send your location information to about the weather or shops around where you DOCOMO on a regular basis.
Camera Shooting still images/moving pictures Fast-Mo Viewing shooting screen Smile-finder Tracking focus Skew correction Shooting type (Switch img/voice) Shooting still images Point the camera at an object, g [ When Auto save mode is "OFF", a confirmation screen for saving appears. <Still image shooting screen>...
Page 62
If the inside temperature of the FOMA terminal To do Operation becomes high because of heat during camera Continuous On the still image shooting operation, the recording or camera function may be screen, m mode Auto [Setting]efde deactivated before the maximum recording time to m [Close]ePoint the camera protect the FOMA terminal.
Page 63
1Seg Watching 1Seg "Auto setting", make sure to register them to the channel list. For details on rearrangement of Using 1Seg Digital Terrestrial Television Broadcasting, refer 1Seg is a service provided by TV broadcasting enterprises (stations), etc. A communication fee for to the following websites.
Page 64
Select an areae"Yes" Watching/Recording reservation Watching 1Seg med CAMERA/TV/MUSICeb T (1 sec. or more) 1Seged TV timer list Viewing and operating the m [Submenu]ea Set new timere watching screen Select timer optioneC [Save] You can watch 1Seg in full screen, or divide the When selecting "Manual reception"...
Link lyrics & song. The following operations are available on the * For details of MUSIC Player, refer to NTT player screen. DOCOMO website. For Windows Media Player, Pausing/Playing : g [PAUSE/PLAY] contact the manufacturer of your PC. Adjusting volume : j Rewinding/Fast forwarding : h (1 sec.
I (1 sec. or more)eSelect a foldere A packet communication fee for overseas use Select i-αppli differs from the one in Japan. DOCOMO assumes no responsibility for the Point information set in Osaifu-Keitai compatible i- αppli (IC card). Starting Osaifu-Keitai compatible i-αppli : #aeSelect i-αppli...
i-motion/Movie Playing i-motion/movie You can obtain i-motion/movie (images, sound, Downloading i-motion/Movie etc) from sites or websites. ✜ Select i-motion/Movie while site or Playable i-motion website is displayed Type Playing action Playback starts while data is downloaded or Standard While the i-motion data is when the download is completed.
Page 68
Osaifu-Keitai compatible service such as malfunction or Point model change, DOCOMO assumes no If IC card is not detected successfully when you hold responsibility for the loss of data. mark of the FOMA terminal over IC card reader,...
Convenient tools Convenient tools Shabette-Kensaku Voice quick start You can use i-mode search by speaking a When you do not know a desired menu of function keyword. (In Japanese only) or you want to activate the function quickly, the A packet communication fee is charged for function can be activated by voice sound input using.
Convenient tools Convenient tools Schedule Alarm Manage memos by Schedule or check a You can also set to activate 1Seg after sounding downloaded i-schedule. (In Japanese only) alarm. The view and function of schedule varies by the mef Toolec AlarmeSelect a schedule type.
Page 72
Convenient tools Bluetooth You can establish a wireless connection between Registering Bluetooth devices FOMA terminal and a Bluetooth device. For operations of the Bluetooth device, refer to the Set a Bluetooth device to registration stand-by operation manual of your Bluetooth device. mode in advance.
Page 73
(main)ef Access point settings Set required itemseC [Save] Wi-Fi compatible device Select other than "None (open)" in F-01E (AP mode) Authentication type field and press "Set advanced", and then you can set encryption key according to the authentication type or MAC address filter.
Setting Access point (APN) Client mode (Sub unit) Set an access point to use for external connection With connecting the access point for small scale in AP mode. network such as home network or Public wireless mef Toole"Wi-Fi"eb Access LAN service as a client (Sub unit), you can view point (main)ec Access points (APN) websites or download/upload data in high-speed.
FOMA schedule, etc. in microSD card. terminal. And the data saved from FOMA terminal The F-01E supports commercially available may not be displayed or played in other device. microSD card of up to 2 GB, and microSDHC card of up to 32 GB (As of November, 2012).
Page 76
Data Management Exchanging data between FOMA terminal and microSD card Select image to copy selected itemeC, Copying images to microSD authenticate to copy all data in a folder. card Move to the cursor to a foldereC mee Data Boxea My picturee [Confirm]e"Yes"...
Data Management Infrared communication/iC transmission You can send/receive data to/from devices such as To do Operation FOMA terminal supporting infrared Sending an item Move the cursor to a communication function or iC transmission via infrared phonebook entryem function. or be communication/ [Submenu]ehea ae"Yes"...
From a PC, you can operate data in a microSD card DOCOMO keitai datalink in FOMA terminal. DOCOMO keitai datalink is a software for backing up When USB mode is set to "microSD mode" or "MTP phonebook, mail and other data in your mobile mode", installation of FOMA communication...
Page 79
Charging cannot be completed (Battery level gets The docomo mini UIM card is not recognized. low even while the battery is charged) Is the docomo mini UIM card installed in the right Charging may not be completed during a call or direction? communication.
Page 80
Turn the power off and on, or remove and attach Have you activated Omakase Lock or IC card lock? the battery pack or the docomo mini UIM card. Do you place mark of FOMA terminal over IC Even when the signal meter on your FOMA...
All repairs that are requested are charged. repair is required Replacement parts Take your FOMA terminal to DOCOMO-specified Replacement parts (parts required to maintain the repair office. Be sure to check the opening hours of product functions) are basically kept in stock for at the office before you go.
The following cases may be Make settings to send error information to regarded as modifications. DOCOMO if an error occurs on your terminal. - A sticker etc. is put on the display or keypad Information is sent at night. Packet...
(the server for software update managed update", "Immediate update" and "Reserved by DOCOMO). DOCOMO does not use the sent update". information for purposes except software update. * Software update can be done even when various When software update has failed, "Rewrite failed"...
Support Scanning function (Security Scan) For the data or programs that are imported to Scan result FOMA terminal, this function detects data and deletes data or inhibits activation of applications Warning level Actions that may cause troubles. [0] Operation "OK" : Continue processing of the The Scanning function provides a certain started application may not run...
Some products are Wireless Earphone Set P01 unavailable depending on the area. Wireless Earphone Set 02/03 For details, contact a sales outlet such as docomo Bluetooth Headset F01 Shop. For details about the optional devices, refer AC adapter for Bluetooth Headset F01 to the instruction manual for each device.
Appendix Menu list Menu list for the case Select startup menu is set to "Basic menu" is described. Menus indicated in can be restored to the default by executing Reset (including the menu whose partial sub content menu will be reset to the default). Mail Mail logs Sent msg.
Page 87
i-αppli setting Sound effect volume Melody Software info disp. Content package Auto-start My document i-Widget settings Kisekae Tool AUTO-GPS preferred setting Machi-chara Sort software Chara-den Display light time 1Seg Brightness Home media Vibration mode Other i-αppli shortcuts My collection i-αppli power saver Tool i-αppli call DL set Bar code reader...
Page 88
V.phone dialing img. Store word Videophone receiving Download dictionary Data session arv. Act Voice quick start Operation Shabette-Kensaku Image setting Contact DOCOMO Notify switchable mode External device Call duration/charge Call charge Call duration Reset call cost TEL function Call cost limit...
Page 89
Setting 2in1 2in1 mode switching Ph.book 2in1 setting Screen/Display Kisekae Tool setting Stand-by display setting Stand-by display setting Call/receive settings MyFACE setting 2in1 function OFF Color theme setting Receive avoidance Each display setting Melody call Machi-chara setting Voice mail service Activate Menu preference Ring time...
Page 90
Lock/Security Locks Other setting Self mode Privacy mode Initial setting Code & Fingerprint Delete all data Security indicator Reset Kid-safe mode Software update Scanning function Error info send set. Password manager Check remote setting microSD password setting Memory status UIM setting Side key shortcut Call rejection setting Motion sensor...
Page 91
i-concier Overseas network search 3G/GSM setting Network search setting i-concier PLMN setting Profile Display operator name setting Profile Display area status Re-search icon display setting Osaifu-Keitai Overseas setting Inquiries(overseas) IC card content Barring incoming call when DCMX roaming ToruCa Missed call notification for roaming IC card lock setting IC card lock...
Appendix Main specifications Phone Recording Savable still Up to approx. 1,400 images section images (default) Product name F-01E × Continuous Size Approx. 111 mm (H) 50 mm × shooting of 11.7mm (T) still images (Thickest part : Approx. 16.2mm) File format for...
Page 93
*1 Continuous stand-by time indicates the estimated time when Savable/Recordable/ FOMA terminal is closed and able to receive radio waves normally. Stationary continuous stand-by time indicates the Protectable number average utilization time FOMA terminal is closed and able to receive radio waves normally remains stationary. *2 Call, communication or stand-by time may be reduced to Savable/ about half, or 1Seg watching time may be reduced due to...
This mobile phone can be used in positions other than against your ear. This mobile phone satisfies the The product "F-01E" is declared to conform with the international guidelines when used with a carrying essential requirements of European Union Directive...
This mobile phone complies with the EU requirements Federal Communications for exposure to radio waves. Commission (FCC) Notice Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR limits This device complies with part 15 of the FCC rules. exposure to radio-frequency(RF) energy, which SAR Operation is subject to the following two conditions : value, when tested for compliance against the...
Page 96
Before a phone model is available for sale to the public, * In the United States, the SAR limit for wireless mobile phones used by the general public is 1.6 Watts/kg (W/kg), averaged it must be tested and certified to prove to the FCC that over one gram of tissue.
For other Medical Devices : Important Safety Information Please consult your physician and the device manufacturer to determine if operation of your phone AIRCRAFT may interfere with the operation of your medical Switch off your wireless device when boarding an device.
"FOMA", "i-mode", "i-αppli", "i-motion", "Deco-mail", reserved. "Chara-den", "ToruCa", "mopera U", "WORLD CALL", Powered by JBlend Copyright 2002-2011 "DCMX", "i-area", "WORLD WING", "2in1", "docomo Aplix Corporation. All rights reserved. STYLE series" and logos of "i-mode", "i-αppli", JBlend and JBlend-related trademarks are "Music&Video Channel", "iC"...
Page 99
The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by certification marks of the Digital Living Network NTT DOCOMO, INC. is under license. Other Alliance. trademarks and names are those of their respective OBEX, IrSimple, IrSS...
Page 100
- Playing MPEG-4 Video supplied from the provider Apache License V2.0. and altered as necessary by licensed from MPEG-LA NTT DOCOMO, INC. For further utilizing such as promotion, in-house This product contains software licensed complying use or profit-making business, please contact with GNU Lesser General Public License (LGPL), MPEG LA, LLC in U.S.
Page 101
The HMM-Based Speech Synthesis Engine USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE embedded in this product uses the Simplified BSD POSSIBILITY OF SUCH DAMAGE. License. Attached DVD (Electronic dictionary data DVD) (Sample) contains following dictionary ------------------------------------------------------------------------------------ data (27 dictionaries 6 searches by category).
The SIM unlock service is provided at a docomo (Daily Japanese-Chinese-English/Chinese- Shop. Japanese-English dictionary) A SIM unlock charge is separately required. If you use a SIM other than by DOCOMO, available (Daily services and functions will be limited. DOCOMO is Japanese-Spanish-English/Spanish-Japanese- not liable to any failures or malfunctions.
Page 103
Attachments ........... Displaying web pages........AUTO-GPS............DOCOMO Connection Manager..... Auto-key lock ..........DOCOMO keitai datalink ........ docomo mini UIM card ........docomo Palette UI .......... Back Cover ............Backup at once ..........Bar code reader..........Early warning "Area Mail"......Battery pack ............
Page 104
microSD card ........... Moving picture display ........i-αppli .............. MUSIC Player........... IC card lock............MyFACE iC transmission ..........i-channel ............Icon ..............Navigation ............i-concier ............Network security code ........i-mode fault diagnosis site ......Network service ..........i-mode password..........i-motion/Movie..........
Page 105
Receiving a videophone call ......Troubleshooting..........Receiving i-mode mail........Record message ..........Recording reservation........Unoperated lock set........Redial ............... Updating software .......... Replying to mail..........USB mode............Reset ..............Ring tone ............Vibration mode ..........Voice Mail Service........... SAR ..............Voice quick start ..........
Page 106
* You may not use the services depending on your access from overseas. subscription. * You need "docomo ID/Password" to access the site from * There are cases where the site may not be available to your PC. system maintenance, etc.
Page 107
If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal. If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.
5.7Mbps by using access points that support FOMA packet communication such as mopera U of DOCOMO's Internet connection service. Best effort method which the actual communication speed varies with the environment and the rate of congestion offers.
For the latest information about operating environment, refer to NTT DOCOMO website. DOCOMO will not guarantee operations on upgraded OS or added/changed operating environment. Note that utilization may not be possible in certain operating environments. DOCOMO assumes no responsibility for pertaining to operation under conditions other than that described above.
Page 111
Introduction of DOCOMO keitai datalink DOCOMO keitai datalink is software to back up and edit your phone information such as phonebook and mail. It is provided on NTT DOCOMO website. For details and download of this software, refer to the following website.
Flow of setup for data transfer (OBEX communication) When using USB Cable, install FOMA communication configuration file (driver) in advance. Downloading FOMA communication configuration file (driver) from NTT DOCOMO website and installing Data transfer Flow of setup for data communication This section describes the setup work for performing packet communication or 64K data communication.
(Close)" or " (End)". For installing/uninstalling FOMA communication configuration file (driver) or DOCOMO Connection Manager, make sure that a user with administrator's privilege performs the operation. Installing/ uninstalling the software by other users may produce an error. For details on PC administrator privileges, refer to the PC manual or contact your PC manufacturer or Microsoft Corporation.
Do not connect FOMA terminal until a message that instructs you to connect FOMA terminal to a PC appears in Step 5. Download FOMA communication configuration file (driver) from NTT DOCOMO website and decompress. http://www.nttdocomo.co.jp/support/utilization/application/foma/com_set/driver/index.html Before downloading, check model name of FOMA terminal.
Page 115
Confirming FOMA communication configuration file (driver) When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed. <Example> Checking on Windows 7 (Start) " (Control panel)" " (System and security)" " (Device manager)" in the " (System)"...
✔INFORMATION When "FOMA F01E USB Driver" is not displayed on the deletion screen, execute the operations in "Installing FOMA communication configuration file (driver)" again and uninstall. Preparing for Bluetooth connection You can make data communication by connecting a PC compatible with Bluetooth and FOMA terminal using Bluetooth.
Also, you can check an estimate of data communication volume or usage fees by the charge counter function. In this manual, the method of installing DOCOMO Connection Manager is explained. Connect/Disconnect button For Internet connection with FOMA terminal, you need to subscribe to flat-rate data plan or FOMA service and Internet service provider (mopera U etc.) applicable to data communication.
FOMA terminal to a PC or another device with a USB cable. Before installing DOCOMO Connection Manager Before installing DOCOMO Connection Manager, check the items below and perform to change setting of software/uninstall as required. Prepare FOMA terminal and FOMA USB Cable with Charge Function 02 (optional) (For Bluetooth connection, USB cable is not required).
FOMA Byte counter To use docomo Wi-Fi by DOCOMO Connection Manager, uninstall the following public wireless LAN connection software. If any of them is installed at the same time, docomo Wi-Fi connection cannot be used by DOCOMO Connection Manager. (U public wireless LAN utility software)
Page 120
Confirm " (Precautions)" and click " (Next)". Confirm the contents of (Software license agreement) and if you agree to the agreement, select " (Agree to the clauses of the agreement)" and click " (Next)". Confirm the installing folder and click " (Next)".
Page 121
When the "InstallShield (InstallShield wizard is completed)" screen appears, click " (Done)". Installing DOCOMO Connection Manager is completed. ✔INFORMATION Installation may take a few minutes. When a message notifying you to reboot Windows is displayed, follow the instruction of screen and reboot.
When booting a PC at first time, the setting wizard screen appears automatically. According to the setting wizard, perform to set for making data communication connecting to Internet. After setting, you can perform communication using DOCOMO Connection Manager. For details, refer to Help of DOCOMO Connection Manager. ✔INFORMATION Just exiting the Internet browser or mail software may not disconnect communication.
Setting communications without using DOCOMO Connection Manager The method of dialup connection setup without DOCOMO Connection Manager is explained. Flow of dialup network setting Flow of setup for data communication Before operating, make sure that a PC and FOMA terminal are properly connected.
Page 124
❖ Setting the dialup connection (APN) <Example> Setting under Windows XP Click " (Start)" Select " (All programs)" " (Accessories)" " (Communication)" and click " (Hyper terminal)". Enter the desired dialup connection name in " (Name)" Click "OK". The following characters (one-byte) cannot be used in "...
Page 125
Confirm that "OK" is displayed and click " (File)" Click " (End HyperTerminal)". When confirming disconnection, click " (Yes)" When confirming saving, click " (No)". Setting Show/Hide caller ID You can set to show/hide call ID for packet communication at once. Caller ID is your important information.
Setting dialup network In this manual, the description takes the case of IP connection to mopera U via packet communication for example. When connecting to mopera U via packet communication, enter the following number in the phone number field. mopera U (PPP connection) : mopera U (IP connection) : 128K communication (PPP connection) : When connecting to mopera U via 64K data communication, enter the following number in the phone...
Page 127
Enter the phone number of the dialup connection in " (Dialup phone number)" (" <cid>#" for packet communication) with one-byte Enter " (User name)" Enter " (Password)" Enter " (Connection name)" and click " (Connect)". <cid> : The number registered in P16 "Setting the dialup connection (APN)" In "...
Page 128
Confirm the setting of each item in " (General)" tab. When multiple modems are connected to a PC, set as follows. For USB cable connection : Select only " FOMA F01E (Modem-FOMA F01E)" at " (Connection method)" field. For Bluetooth connection : Select " Bluetooth ) (Modem- (Standard modem via Bluetooth link you use))"...
Page 129
❖ Setting for Windows XP Click " (Start)" Select " (All programs)" " (Accessories)" " (Communication)" and click " (New connection wizard)". On the " (Start new connection wizard start)" screen, click " (Next)". Select " (Connect to Internet)" and click " (Next)".
Page 130
Enter " (User name)" Enter " (Password)" Enter " (Password confirmation entry)" Select all items as shown below and click " (Next)". In " (User name)" and " (Password)", enter the user name and password specified by your provider or network administrator.
Page 131
Click " (Network)" tab Set each item as shown below Click " (Settings)". When settings of IP and DNS information have been requested from the provider, etc. select " (TCP/IP) (Internet protocol (TCP/IP))", click " (Property)" and set necessary information. Since "QoS (QoS packet scheduler)"...
Page 132
Enter " (User name)" Enter " (Password)" Click " (Dial)". In " (User name)" and " (Password)", enter the user name and password specified by your provider or network administrator. When using mopera U, you do not need to enter "...
Connecting to a Wi-Fi compatible PC Even out of public wireless LAN area, you can perform packet communication with connecting a Wi-Fi compatible PC to use FOMA terminal as an access point. Switch FOMA terminal to AP mode ON in advance. For AP mode settings, refer to "Instruction manual (detailed version) (in Japanese only)"...
AT command AT commands are commands for setting FOMA terminal functions using a PC. FOMA terminals comply with AT commands and support some extended commands and proprietary AT commands. ❖ AT command input format "AT" must be entered before each AT command. Commands must be entered in one-byte alphanumeric characters.
Page 135
Disconnect line when entered during a communication. Execute in online command mode. NO CARRIER ATI<n> Display the confirmation code. n=0 : "NTT DoCoMo" n=1 : Display model name of FOMA terminal ATI0 n=2 : Display version of FOMA terminal n=3 : Display elements of ACMP signals...
Page 136
Upper slot : Command Description Lower slot : Example ATS4=<n> Set the line feed (LF) character. When result code is displayed as alphabetic characters, appends the character after the carriage return (CR) character. ATS4=10 n=10 (fixed value) ATS4? : Display current settings ATS5=<n>...
Page 137
Upper slot : Command Description Lower slot : Example AT&E<n> Set the speed display used when connection is made. n=0 : Display communication speed of wireless zone AT&E1 n=1 : Display communication speed between a PC and FOMA terminal (default) AT&F Reset the current setting to the default.
Page 138
Upper slot : Command Description Lower slot : Example AT+CBST=<n>,1,0 Set the line to use (Setting of bearer service) n=116 : 64K data communication (default) n=134 : 64K videophone AT+CBST=116,1,0 AT+CBST? : Display current settings AT+CBST=? : Display a list of assignable values AT+CDIP=<n>...
Page 139
AT+CREG=? : Display a list of assignable values AT+CUSD=<n>,"<str>" Set Additional service (Register USSD) of Network Services. Enter Service code provided by DOCOMO in <str>. AT+CUSD=0,"012345678" n=0 : Not answer mid result (default) n=1 : Answer mid result in "+CUSD : <m>, "<str>",0" format...
Page 140
Upper slot : Command Description Lower slot : Example AT+GMI Display FOMA terminal manufacturer name. AT+GMI FUJITSU AT+GMM Display model name of FOMA terminal. AT+GMM FOMA F01E AT+GMR Display FOMA terminal version. AT+GMR Ver1.00 AT+IFC=<n,m> Set how to control local flow between a PC and FOMA terminal. n, m=0 : No flow control n, m=1 : Perform XON/XOFF flow control AT+IFC=2,2...
Page 141
Error messages list Text display Description SIM not inserted UIM is not set. SIM wrong Other than DOCOMO SIM (IC card equivalent to UIM) is inserted. incorrect password Incorrect password unknown Unknown error Supplement to AT command <cid> is the number used to control dialup connection (APN) for packet communication to be registered in FOMA terminal.
Page 142
Command name : +CGEQMIN=[parameter] Outline Set the criteria for judging whether to permit QoS (Quality of Service) provisioned by the network when packet communication is established. Format AT+CGEQMIN= [<cid> [,,<Maximum bitrate UL> [,<Maximum bitrate DL>] ] ] Parameter description <cid> : 1-10 <Maximum bitrate UL>...
Result codes When ATV command is set to n=1 (default), the result code is displayed in alphabetic characters. When the command is set to n=0, the result code is displayed numerically. Result codes Text display Meaning Operation performed normally CONNECT Terminal connected to other party RING Incoming call...
Page 144
Display example of result code When ATX0 is set Regardless of the settings of AT V command, only "CONNECT" is displayed upon completion of connection. Text display example : ATD CONNECT Number display example : ATD When ATX1 is set When ATX1, AT V0 (default) is set Upon completion of connection, the result code is displayed in the following format : "CONNECT <speed between FOMA terminal - PC>".
Kuten Code List For entering characters using code, see "Entering characters using code" in the attached manual. Note that some characters in the code input list may look different from actual ones. 4th digit of code 4th digit of code 4th digit of code -3rd -3rd...
Page 146
4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 147
4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 148
4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Need help?
Do you have a question about the Style F-01E and is the answer not in the manual?
Questions and answers