NTT docomo FOMA N702iS Manual page 94

Table of Contents

Advertisement

Select the image to be sent
2
Pre-installed......Sends only a message.
Original......Sends an image and a message.
■ To change the setting
p
(FUNC) "Change setting" Select a folder Select an image
1
......Sends the image selected in "Substitute image".
Chara-den*
Chara-den list screen → P.284
Priority order for Chara-den setting → P.102
■ To change the setting
p
(FUNC) "Change setting" Select an image
*1 : This setting appears only when "Substitutive image" is selected.
■ Messages to be sent
The messages sent are as follows:
For answer hold
For holding
For sending the substitute image : "Camera Off"
For recording message
For preparing
For voice calls
N
<Visual preference>
This can also be set from the function menu during a videophone call. However, when the videophone call ends, the settings revert to
the values set using this function.
If the signal quality deteriorates during a videophone call, the image may become grainy or patchy regardless of the settings in "Visual
preference".
<Select image>
Some GIF images may not be set in "Original".
You can switch between the camera image and substitute image during a videophone call.
To check an image, highlight the item you want to check and press o (Play).
Changing the setting from "Original" to "Pre-installed" or "Chara-den" does not delete the stored image.
The set still image is displayed both on your own FOMA terminal and the other party's phone. However, the answering message for a
recorded message is only sent to the other party's phone.
Even when you delete the still image selected in "Original", the image is displayed (sent) to the other party.
A "Pre-installed" substitute image is sent when PIM lock is set.
When the Chara-den character set as the substitute image is deleted and the "Chara-den" substitute image cannot be displayed, the
pre-installed "Dimo" is sent. If you delete the pre-installed "Dimo", the "Pre-installed" substitute still image is sent.
<Voice call auto switch>
When a videophone call is switched and redialed as a voice call, the call is charged as a voice call and digital communication charges
are do not applied.
When a call is redialed, only the voice call records are logged in the "Redial/Dialed calls" record.
Even if "Voice call auto switch" is set to "ON", it may not be possible to redial due to the circumstances of the network or the other
party, such as busy.
Checking your appearance during a videophone call <Visual check>
Videophone in-call screen (P.85) p(FUNC) "Visual check"
1
You can use the image from the front camera to check your appearance.
"
" is displayed during a visual check.
A substitute image is sent to the other party.
p(FUNC) "Visual check off"
2
Visual check ends and the screen returns to the state before the visual check.
92
: "On Hold"
: "Holding"
: "Recording Voice only"
: "Preparing"
: "Recording Voice only"

Advertisement

Table of Contents
loading

Table of Contents