NTT docomo SIMPURE N Foma N600i Manual

page of 225

/ 225
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the SIMPURE N Foma N600i and is the answer not in the manual?

Questions and answers

Summary of Contents for NTT docomo SIMPURE N Foma N600i

Page 2 For Users of SIMPURE N ■ Notifications to users - Please find the following modifications to "SIMPURE N FOMA N600i Manual". - The latest information about the manual is on DoCoMo website. - User's Manual Download (http://www.nttdocomo.co.jp/english/support/manual/download/index.html) * The URL and contents may change without any notice in the future. Where to find Current descriptions Modified descriptions (Page/item) Page 20 How to View the Display (Right The ring tone volume level for Incoming call and mail The ring tone volume level set to "silent" column at the bottom) set to the lowest level Page 21 ● You can check for missed calls and new mails by ● You can check for missed calls and new mails by How to View the Display pressing with the FOMA terminal folded. pressing with the FOMA terminal folded. (NOTE) ・If you have missed calls or new mails, the ・If you have missed calls or new mails, the incoming call lamp flashes in blue. incoming call lamp lights in blue. (Changed the incoming call lamp state to "lights in blue") Page 31 ー ● If your FOMA card in use has no call waiting subscription, Receiving a Call (No descriptions) you cannot hold a call.
Page 3 Where to find Current descriptions Modified descriptions (Page/item) Page 122 4 Enter a command → Enter a response message 4 Enter a command → Enter a response message Adding response message → "YES" ("YES" is deleted) (Step 4) Page 132 ● You do not need to subscribe to the WORLD ● You do not need to subscribe to the WORLD WING International Roaming Service WING to use the international roaming service. to use the international roaming service. However, (Left column at the top) if you subscribed to the FOMA service before August 31, 2005 but have not subscribed to the WORLD WING, you need to subscribe to the WORLD WING to use the service for the first time only. → p.24 Page 158 (Points to check) Malfunction Checklist ・Did you start dialing before hearing the dial tone? (Problem) (The descriptions on the left column deleted) (Refer to) I dialed a number and initiated the call, but all I hear is a busy tone Page 159 (Points to check) Malfunction Checklist ・Is the "Volume" level set to zero? Change the ...
Page 4 Usig the Using the Dial FOMA Service Codes / Comments FOMA SIMPURE N Terminal Using Network Services on the SIMPURE N FOMA N600i Message Terminal Dial pad Service code displayed on What it means screen The following network services can be accessed using the FOMA SIMPURE N. the screen Please refer to the Network Service Operation Guide for more information on Record an network service details and operations. outgoing message for How to interpret the table ーー the → → ● Network services can be operated using one of the following three methods: Announcement ...
Page 5 Usig the Using the Dial Usig the Using the Dial FOMA Service Codes / Comments FOMA Service Codes / Comments Terminal Terminal Message Message Terminal Terminal Dial pad Service code displayed on What it means Dial pad Service code displayed on What it means screen screen the screen the screen Deactivating Activated. Call ○ ー Forwarding Check Set Deactivated. ーー Service Arrival Act Operation Checking denied. your Call ○...
Page 6 Usig the Using the Dial Usig the Using the Dial FOMA Service Codes / Comments FOMA Service Codes / Comments Terminal Terminal Message Message Terminal Terminal Dial pad Service code displayed on What it means Dial pad Service code displayed on What it means screen screen the screen the screen Block your Check the Activated. Phone Caller ID ○ ーー Number (Set Display ー Beforehand) Request Deactivated. Service Display your Settings Phone ...
Page 7 FOMA SIMPURE N * : It is not possible to play the streaming type of i-motion contents. Also it is not Using the i-mode Service/SMS FOMA N600i possible to play the ASF type of i-motion contents. It may not be able to play i- motion files depending on content type. The following i-mode services/ SMS can be accessed using the FOMA SIMPURE N. ※ : Chaku-Uta is a registered trademark of Sony Music Entertainment (Japan) Inc. Please refer to the i-mode Operations Guide and the Network Service Operation Guide for more information on service details and operations. Services Supported Services Supported i-mode Site access service ○ 3D sound × Internet Connection Service ○ i-motion ○ ® Access Restriction Function ○...
Page 8 DoCoMo W-CDMA System Thank you for choosing the FOMA N600i. Please read this manual and the users guides that came with the battery pack and other devices carefully before and during use so that you can use the FOMA terminal correctly. If you have any inquiries regarding this manual, contact the number listed in "For inquiries" on the back cover. FOMA N600i is your efficient partner. Please use it carefully and habitually. Before using your FOMA terminal ● The FOMA network operates using radio waves. In a place where the reception is very poor, such as in a tunnel, in a building and under the ground, or in an out-of-service area, you cannot make a phone call. You may also have difficulty making a phone call from the upper floors of tall buildings, even if there is no obvious physical obstruction. And even if the reception is good (i.e. the signal strength indicator shows 3 bars) and you do not move during the call, you may still find that your call is cut off. ● When you use your FOMA terminal in public places, particularly where it is crowded or quiet, take care not to disturb the people around you. ● Since the FOMA terminal uses radio waves to communicate, there is always a risk that your call is wiretapped by the third party. However, the W-CDMA system automatically supports the tapping prevention for all calls. Even if a third party succeeds in intercepting your call, only incomprehensible noise will be heard.
Page 9: How To Use This Manual
How to Use This Manual Descriptions in this manual (Quick Manual → p.172） This manual presents the information in the following manner. "Overseas Use" describes useful information and cautions on using the FOMA terminal overseas. Refer to "Overseas Use" when you use the FOMA terminal overseas. → p.131 <Photo mode> Function menu (Photo mode screen) Function menu (Photo mode screen) Shooting Still Images Item Description Use the built-in camera to shoot still images. Front camera Switches between the front camera and the rear /Rear camera camera. → p.60 ● You can save the shots in the Camera folder under "My picture". Movie mode Changes to the Movie mode. On the standby screen Select size Select the image size from VGA(640x480), [Left] (Camera) CIF(352x288), Stand-by(176x180), Mail(L)(176x144) and Mail(S)(128x96). "Photo mode" Storage Sets the ﬁle size for shooting a still image. The Photo mode screen appears. setting Unrestricted Shoots without restrictions on the ■...
Page 10: Table Of Contents
Contents How to Use This Manual............1 Checking the Phonebook Storage Status ..... 45 Renaming Groups ..............45 Contents ..................2 Storing Your Personal Data ..........46 Safety Precautions ..............4 Using Dialing Shortcuts ............46 Handling with Care .............. 12 Settings Intellectual Property Right ..........14 Main Components and Optional Equipment....16 Setting the Ring Tone............48 Setting the Date and Time..........49 Getting Started Setting Manner mode............49 Setting the Display and Light ..........50 Component Names and Functions ........18 Setting Talk Functions............51 How to View the Display ............20 Setting Lock/Security ............51 Menu Functions ...............22 Setting Network Functions ..........52 Using the FOMA Card (UIM)..........23 Setting Videophone ...............52...
Page 11 Reading/Replying/Forwarding i-mode Mail......82 Entering Text ................. 128 Setting Up the Mail Functions ...........90 Using Predictive Conversion..........130 Composing and Sending SMS (Short Message) ......92 Overseas Use Reading/Replying to/Forwarding SMS (Short Message) ..93 Specifying SMS (Short Message) Settings......96 International Roaming Service ........132 Checkpoints before Overseas Use........ 133 i-αppli Making/Receiving a Call at the Destination ....136 What is an i-αppli? ..............98 Settings Related to Overseas Use ....... 137 Downloading i-αppli from Sites .........98 Using Network Services Overseas ........138 Running i-αppli.................99 Appendix Pre-installed software............99 Setting i-αppli ...............100 Menu Function List.............. 142 Upgrading i-αppli ..............100 Character Allocation to Keypad........
Page 12: Safety Precautions
Safety Precautions Always follow these instructions ■ To ensure that you use your FOMA terminal correctly, read the Safety Precautions carefully before you use. Keep this manual in a safe place for future reference. ■ The safety precautions must be observed at all times since they contain the information intended to prevent the bodily injuries or the damage to the property. ■ The following symbols indicate the different degrees of injuries and damage that may occur if the information provided is not observed and the FOMA terminal is used incorrectly: DANGER WARNING CAUTION Indicates that the death or Indicates that the death or Indicates that the bodily serious bodily injury may serious bodily injury may injury and/or damage to directly and immediately result from the improper use. the property may result result from the improper use. from the improper use. ■ The following symbols indicate the specific directions: Indicates that it must not be used near the Indicates that it is prohibited. water, which means that you must not wet it. Don t No liquids Indicates that it must not be Indicates that you must do it following disassembled. the instructions. No disassembly Indicates that you must not touch it Indicates that you must unplug the with your hand wet.
Page 13: Handling Foma Terminal, Battery Pack, Adapter (Including Charger) And Foma Card (Common)
1. Handling FOMA Terminal, Battery Pack, Adapter (Including Charger) and FOMA Card (Common) DANGER Use the battery pack and adapter (including the charger) specified by NTT DoCoMo for the FOMA terminal. Using the devices other than those specified by NTT DoCoMo may cause the FOMA terminal, battery pack and other devices to leak, overheat, explode, ignite or malfunction. Battery Pack N12 FOMA AC Adapter 01 FOMA AC Adapter for Global Use 01 For information on other compatible products, contact the DoCoMo service counter. Do not wet the devices. Exposing the FOMA terminal and other devices to liquids such as water or pet urine may cause overheating, electric shock, fire, malfunction, injury, etc. Be careful where and how you use the devices. No liquids Do not try to disassemble or modify the FOMA terminal or other devices. Do not solder them. Doing so may cause fire, injury, electric shock, malfunction, etc. Also, doing so may cause the battery pack to leak, overheat, explode or ignite. No disassembly Do not use or leave the FOMA terminal or other devices in locations subject to high temperatures, such as near fire, near heater, in direct sunlight or inside a car on a hot day. Doing so may cause the battery pack to leak, overheat, explode or ignite, cause the devices to be deformed or malfunction, Don t lower the performance or shorten the life. Also, doing so may cause a part of the case to become hot and burn you. WARNING Do not place the FOMA terminal, battery pack, Keep the conductive foreign matters (metal, pencil adapters (including the charger) in cooking lead, etc.) away from the charge terminal or external appliances such as microwave ovens or in a connector. Do not insert those matters inside. Don t Don t pressure cooker. This may result in the short-circuit causing the FOMA terminal to ignite or malfunction. Doing so may cause the battery pack to leak, overheat, explode or ignite, cause the FOMA terminal or adapter If you notice anything unusual about the FOMA (including the charger) to overheat, smoke or ignite, or terminal or other devices, such as an unusual odor, ...
Page 14: Handling The Foma Terminal
CAUTION If your child uses the FOMA terminal, instruct him/ Do not leave the devices on a slope or unstable her how to use it. Make sure that he/she always surface. uses the FOMA terminal correctly as you instruct. The devices may fall to cause injury or malfunction. Don t Improper usage could result in bodily injury. Keep the devices away from humid, dusty or hot Keep the devices out of young children's reach. places. A young child may swallow a device or suffer from the injury. Keeping them in such a place may cause malfunction. Don t Charging, shooting/playing a movie, talking on a videophone call or using i-mode/i- ppli repeatedly or continuously for a long time may increase the temperature of the FOMA terminal, battery pack or adapter (including the charger). Exposing your skin directly to the high-temperature part for a long time may cause skin irritations such as itch, rashes or eczema. Take great care especially when using the FOMA terminal connected to the adapter (including the charger) continuously for a long time. 2. Handling the FOMA Terminal WARNING Do not use the FOMA terminal while driving a Turn off the FOMA terminal near the electronic vehicle. equipment using the high-precision control or weak From November 1st, 2004, the penalty is imposed on a signals. Don t driver who uses a mobile phone while driving. Even if you This may interfere with the operation of sensitive ...
Page 15 WARNING Turn off the FOMA terminal in a place where it is If you are wearing electronic medical equipment prohibited to use the mobile phone, such as in an on your body, do not put the FOMA terminal in airplane or in a hospital. your breast pocket or in the inside pocket of your Don t Using the FOMA terminal in such a place may affect the jacket. electronic or medical equipment. If your FOMA terminal is The FOMA terminal is a folding type and uses a magnet equipped with the automatic power-on function, make to detect that the FOMA terminal is folded. Using the sure to set OFF to the function before turning off the FOMA terminal in close proximity to electronic medical FOMA terminal. equipment may cause the equipment to malfunction due Follow the instructions provided by the medical facility to the effect of the magnet. about using the mobile phone. If you use the phone in an airplane, which is prohibited, you may be punished by law. If you have a weak heart, you should take extra Hold the FOMA terminal off your ear and keep enough precautions when setting functions such as the distance from it when you talk in the hands-free mode. Vibrator and Ring volume functions for incoming It may affect your hearing or cause interference to your ears. calls. Your heart may be adversely affected. If you hear thunder while using the FOMA terminal Do not put the FOMA terminal on the dashboard, etc. outdoors, immediately turn off the FOMA terminal as a problem may occur due to air bag inflation. and take shelter in a safe location. The air bag inflation may cause the FOMA terminal to hit Don t you or another person, which may lead to injury, ...
Page 16: Handling The Battery Pack
CAUTION Do not leave the built-in camera lens exposed to Take care not to pinch your finger in the hinge part the direct sunlight for a long time. when you open the FOMA terminal. The condensing function of the lens may cause fire or This may cause injury. Don t malfunction. Using the FOMA terminal may cause skin irritations such as itch, rashes or eczema. If this occurs, immediately stop using the FOMA terminal and see a doctor. 3. Handling the Battery Pack ■ Refer to the information shown on the battery pack label to check the type of battery pack. Label description Battery type Li-ion Lithium-ion DANGER Do not throw the battery pack into a fire. If battery fluid comes into your eyes, do not rub Doing so may cause the battery pack to leak, overheat, your eyes, but immediately rinse your eyes with explode or ignite. clean water and see a doctor. Don t Battery fluid is harmful to your eyes and may result in loss of eyesight. Do not let wire or other metals come close to the Do not puncture the battery pack, hit it with a terminal. Also, do not carry or store the battery hammer or step on it. pack with metallic necklaces, etc. Doing so may cause the battery pack to leak, overheat, Don t Don t explode or ignite.
Page 17: Handling The Adapters (Including The Charger)
WARNING If the battery pack is not fully charged after the If the battery pack leaks or emits an unusual odor, specified charging time has elapsed, stop charging. stop using it immediately and keep it away from Continuing to charge may cause the battery pack to leak, flame or fire. overheat, explode or ignite. The battery fluid is flammable and could ignite, causing a fire or explosion. If battery fluid comes into contact with your skin or clothes, stop using the FOMA terminal immediately and rinse it off with clean water. Battery fluid is harmful to your skin. CAUTION Do not dispose of used battery packs with ordinary garbage. Throwing battery packs out with ordinary garbage constitutes an environmental hazard and may cause the garbage to catch fire. Apply insulation tape to the terminals of used battery packs and return them to the DoCoMo service counter. Alternatively, Don t if there are separate battery disposal facilities in your area, dispose of the battery packs in accordance with your local regulations. 4. Handling the Adapters (Including the Charger) WARNING Use the specified power supply and voltage. Do not touch the adapter (including the charger) Using the incorrect voltage may cause fire or cable or power outlet with wet hands. malfunction. If you use the FOMA terminal overseas, take Doing so may cause electric shock. No wet hands the FOMA AC Adapter for Global Use 01 with you. FOMA AC Adapter 01: Do not short-circuit the charging terminal when AC Adapter: AC100V the adapter or charger is plugged to a power FOMA AC Adapter 01 for Global Use: outlet or car cigarette lighter socket. Also, take 100V to 240V AC (should be plugged into a power Don t care for a part of your body (hand, finger, etc.) not ...
Page 18: Handling The Foma Card (Uim)
WARNING Do not use the damaged adapter (including the Do not touch the FOMA terminal, adapter or charger charger) cable or power cord. when you hear a crash of thunder. Doing so may cause fire, electric shock or overheat. There is a risk of being struck by the lightning and Don t Don t suffering electric shock. Always unplug the adapter or charger from the Place the charger on a stable surface during power outlet when it will be left unused for a long charging. Take care not to cover or wrap the charger period. with clothing or bedding. Unplug Don t Failure to observe this precaution may result in fire, Failure to observe this precaution may cause the FOMA electric shock or equipment malfunction. terminal to fall off, overheat, catch fire or malfunction. If any water or other liquid gets into the adapter or When plugging the AC adapter into a power outlet, charger, immediately unplug it from the power outlet make sure that no metallic straps or other or car cigarette lighter socket. metallic objects are caught between the plug and Unplug Water in the adapter or charger may cause electric the socket. shock, smoke emission or fire. Failure to observe this precaution may cause electric shock, short-circuit or fire. CAUTION Always pull the plug out of the power outlet or Do not charge the wet battery pack. socket before cleaning the adapter or charger.
Page 19: Handling The Foma Terminal Near Electronic Medical Equipment
6. Handling the FOMA Terminal Near Electronic Medical Equipment ■ The following safety precautions conform to the guidelines drawn up during the Electromagnetic Compatibility Conference, Japan, regarding how to protect electronic medical equipment from radio waves emitted by mobile phones: WARNING If you use an implantable cardiac pacemaker or Observe the following in hospitals or other medical implantable cardioverter-defibrillator, keep the FOMA facilities: terminal at least 22 cm away. ･ Do not take the FOMA terminal into operating rooms, ICUs (Intensive Care Units) or CCUs (Coronary Care ...
Page 20: Handling With Care
Handling with Care General notes Do not wet the devices. ･ The FOMA terminal, battery pack, adapter and charger are not waterproof. Do not use them in humid or steamy locations such as bathrooms or expose them to rain or other forms of moisture. If you carry the FOMA terminal close to your skin, perspiration may cause internal components to corrode and result in malfunction. If the problem is found to be due to moisture, it will not be covered by the warranty and in some cases may be irreparable. Even if it can be repaired, you will be charged since the damage is not covered by the warranty. Clean with a soft, dry cloth. ･ Rubbing the LCD of the FOMA terminal with a dry cloth to clean it may scratch the LCD surface. Handle the FOMA terminal carefully and clean it using a soft dry cloth (of the type used for eyeglasses). The LCD coating may peel off or stain if moisture or soiling is left on the surface for a long period. ･ Never use chemicals such as alcohol, thinners, benzene or detergents as these agents may erase the printing on the FOMA terminal or cause discoloration. Occasionally clean the connectors with a dry cotton bud. ･ Leaving connectors soiled may result in poor connections and loss of power. Also, as it may cause insufficient charging, clean the connectors with a dry cloth or cotton bud when they are soiled. Do not place the FOMA terminal near an air conditioning vent. ･ Condensation may occur due to rapid temperature changes, and this may cause internal corrosion and malfunction. Do not leave the FOMA terminal in locations where it may be subject to excessive pressure or weight. ･ Do not put the FOMA terminal in a bag filled with other objects or in your hip pocket when you sit down. Doing so may cause malfunction or damage to the LCD or other internal components. Such damage is not covered by the warranty. Read the separate manuals supplied with the battery pack, adapter and charger carefully. Handling the FOMA terminal Do not use the FOMA terminal in extremely high or low temperatures. ･ Use the FOMA terminal within a temperature range between 5℃ and 35℃ with humidity between 45% and 85%. The FOMA terminal may become warm while being used or charged. This is normal, and you can continue to use it. Using the FOMA terminal close to home (landline) phone, TV or radio may affect the operation of such equipment. Move as far as possible away from such devices before using the FOMA terminal. It is your responsibility to keep a separate record of all data stored on your FOMA terminal. ･ Under no circumstances shall NTT DoCoMo be held liable for any loss or damage to the data stored on your FOMA card (UIM). Do not put the FOMA terminal in your hip pocket when you sit down. Also, do not put the FOMA terminal at the bottom of a bag where it may be subject to excessive pressure or weight. ･...
Page 21 Make sure to charge the battery when you use the FOMA terminal for the first time or if you have not used it for a long period. The available operating time of the battery pack depends on the conditions under which you use it and the condition of the battery pack itself. Keep the battery pack in a cool and dry place away from direct sunlight. ･ If you do not use the battery pack for a long period, use up the battery, remove the battery pack from the FOMA terminal or adapter (including the charger), and keep it in the plastic bag where it was in. Handling the adapter (including the charger) Do not charge the battery pack: ･ In a place where the ambient temperature is lower than 5℃ or higher than 35℃ ･ In a humid, dusty or shaky place ･ Near your home phone, TV or radio The adapter or charger may become warm while being charged. This is normal, and you can continue to use it. Do not use the DC adapter to charge battery packs when the car engine is not running. ･ Doing so may drain the car battery. If you use an outlet that provides pull-out prevention, follow the instructions of the outlet manual. Do not shock the adapter or charger. Do not deform the charging terminal or terminal guide. ･ Doing so may cause malfunction. Handling the FOMA card (UIM) When inserting the FOMA card (UIM) into the FOMA terminal, do not apply unnecessary force. The FOMA card (UIM) may become warm while being used or charged. This is normal, and you can continue to use it. Always keep the IC part clean. Clean with a soft, dry cloth. It is your responsibility to keep a separate record of all data stored on the FOMA card (UIM). ･ Under no circumstances shall NTT DoCoMo be held liable for any loss or damage to the data stored on your FOMA card (UIM). To preserve the environment, take used FOMA card (UIM) to the DoCoMo service counter. Do not use the FOMA card (UIM) in extremely high or low temperatures. The warranty does not cover damage caused by inserting the FOMA card (UIM) into some other type of IC card reader/writer. It is your responsibility. Do not scratch, touch or short-circuit the IC carelessly. ･ Doing so may cause loss of data or malfunction. Do not drop or shock the FOMA card (UIM). ･ Doing so may cause malfunction. Do not bend the FOMA card (UIM) or put something heavy on it.
Page 22: Intellectual Property Right
Intellectual Property Right Copyright and portrait right It is prohibited to duplicate, modify or publicly transmit contents such as text, images, music or software that were photographed using the FOMA terminal or downloaded from Internet website, which are under third-party copyright, without the permission of the copyright holder, although it is permitted under copyright law to duplicate or quote the contents for personal use. It may be prohibited to shoot or record the stage performance, entertainment or exhibition even if you only want to enjoy it. Shooting a photo of someone with the FOMA terminal without his or her permission, or displaying a photo of someone shot with the FOMA terminal on the website without his or her permission may be a breach of portrait right. Trademarks and registered trademarks All brand names and product names are trademarks or registered trademarks of the respective companies. ･ "FOMA", "mova", "i-mode", "i- ppli", "WORLD CALL", "WORLD WING", "Public mode", "i-motion", "Message F", "mopera", "mopera U", "i-motion mail", "i-shot", "sigmarion", "musea", "Short mail", "FOMA" logo and "i-mode" logo are trademarks or registered trademarks of NTT DoCoMo, Inc. ･ Java and all Java-related trademarks and logos are trademarks or registered trademarks of US Sun Microsystems, Inc. in the United States and other countries. ･キャッチホン (Call Waiting) is registered trademark of Nippon Telegraph and Telephone Corporation. ･ Microsoft and Windows are registered trademarks of the Microsoft Corporation in the U.S. and other countries. ･ NetFront and are registered trademarks of ACCESS CO., LTD. in Japan and/or other countries. ･ JV-Lite2 and are trademarks or registered trademarks of ACCESS CO., LTD. in Japan and/or other countries.
Page 23 Description of Windows ･ Windows 98 stands for Microsoft Windows 98 operating system. ･ Windows 98SE stands for Microsoft Windows 98 Second Edition operating system. ･ Windows Me stands for Microsoft Windows Millennium Edition operating system. ･ Windows 2000 Professional stands for Microsoft Windows 2000 Professional operating system. ･ Windows XP stands for Microsoft Windows XP Professional operating system or Microsoft Windows XP Home Edition operating system. ･ This manual describes Windows 98 and Windows 98SE as Windows 98. ･ This manual describes Windows Millennium Edition as Windows Me. ･ This manual describes Windows 2000 Professional as Windows 2000. ･ This manual describes Windows XP Professional and Windows XP Home Edition as Windows XP.
Page 24: Main Components And Optional Equipment
Main Components and Optional Equipment Main components FOMA N600i FOMA N600i CD-ROM Manual for FOMA N600i (Including the warranty and Back Cover N11) (This manual) ※The Quick Manual starts on p.172. Battery Pack N12 (Including the manual) Optional equipment FOMA AC Adapter 01 FOMA AC Adapter for Global Use 01 (Including the warranty and manual) (Including the warranty and manual) Other options and accessories → p.157...
Page 25: Getting Started
Getting Started Component Names and Functions............18 How to View the Display................. 20 Menu Functions ..................22 Using the FOMA Card (UIM) ..............23 Inserting/Removing the FOMA card (UIM) ............23 PIN codes for the FOMA card (UIM) ..............23 FOMA card (UIM) operational restriction function ........... 23 FOMA card (UIM) functional differences ............. 24 Inserting/Removing the Battery Pack............24 Inserting the battery pack ..................24 Removing the battery pack ..................25 Battery life ........................25 Charging ....................... 26 Charging the FOMA terminal ................... 26 When the battery runs out ..................
Page 26: Component Names And Functions
Earpiece speaker ・Allows you to hear the other party's voice. Component Names and Functions Display ・How to View the Display→p.20 This manual uses the following icons for each keys: Front camera ・Used to send your video to the other party during a Earpiece speaker Function key Right videophone call. →p.38 ・Used to shoot your pictures (still images) and movies. →p.61, Display Power/End key 4 Multi-function keys Front camera Up/Phonebook key ・Moves the cursor upward. Multi-function keys ・Converts the entered characters into kanji, katakana, alphabets and Dial keys numbers.→p.128 ・Displays the volume screen by holding down for 1 second or longer. You...
Page 27 6 Function key Left $ Back cover [Left] % Through-hole for strap ・Executes an operation displayed on the software key at the ^ Rear camera bottom-left of the screen.→p.21 ・Displays i- ppli menu by holding down for 1 second or longer. ・Used to send images such as scenery to the other party → p.97 during a videophone call. → p.38 7 Send key ・Used to shoot pictures (still images) such as scenery and ・Makes a voice call. →p.30 movies.→ p.61, 63 & Speaker ・Answers a voice call.
Page 28: How To View The Display
Icon Description Refer to How to View the Display (orange) You have a MessageR (Request) at the i-mode Center The following items are displayed on the display. (red) Your MessageR (Request) storage at the i-mode Center full Icon display area (yellowish green) You have a MessageF (Free) at the i-mode Center (red) Your MessageF (Free) storage at the i-mode Center full (orange) You have an unread SMS (Short Message) (red) SMS (Short Message) full SMS space in FOMA card (UIM) full − Schedule or alarm clock set to on 111, 112 Information notiﬁcation icon display area Connected to the FOMA network 132, 135 Connected to the 3G network 132, 135 Software key display area Connected to the GSM/GPRS network 132, 135 Icons displayed in the icon display area i-mode active − (red and green) i-mode communication in progress −...
Page 29 NOTE Icons displayed in the information notification area Clock is not displayed while an information notification icon is The icons displayed in the information notification area indicate selected. receiving/activation status of various functions. You can move the You can check for missed calls and new mails by pressing cursor to an information notification icon by pressing . If more with the FOMA terminal folded. than one information notification icon is displayed, use to ・If you have missed calls or new mails, the incoming call lamp select one of them. Pressing will activate the selected flashes in blue. function.
Page 30: Menu Functions
Menu Function Refer to Menu Functions Change the settings to customize your FOMA terminal To set or check various functions with the FOMA terminal, you can ・ Incoming/Volume ・ Lock/Security call up each function from the main menu. On the standby screen, ・ Clock ・ Connection setting press [Left] to display the main menu. The structure of the menus is as follows: ・ Manner mode ・ Video-phone Settings ・ Display ・ Other settings ・ Talk Enjoy picture, movie, music, etc. ・ My picture ・ Melody Data box ・ i-motion ・ Memory info Take pictures and movies ・...
Page 31: Using The Foma Card (Uim)
PIN codes for the FOMA card (UIM) Using the FOMA Card (UIM) You can set two PIN (Personal Identification Number) codes, PIN1 and PIN2, for the FOMA card (UIM). The FOMA card (UIM) is an IC card that contains private The PIN1 code is a 4 to 8 digit PIN code to be entered every time information such as your phone number. the FOMA terminal is turned on to prevent any unauthorized use by third parties. Inserting/removing the FOMA card (UIM) The PIN2 code is a 4 to 8 digit number that is required as personal authentication for access to online services such as Internet ● Before inserting or removing the FOMA card (UIM), turn off the connection and site access. (The FOMA terminal provides no power, remove the battery pack, and close the FOMA terminal.
Page 32: Inserting/Removing The Battery Pack
FOMA card (UIM) functional differences Inserting/Removing the There are 2 versions in the FOMA card (UIM). Please note that there are the following functional differences when you use Battery Pack different FOMA cards (UIM) on the FOMA terminal. Feature FOMA card (blue) FOMA card (green) ● Be sure to turn the FOMA terminal off before inserting/removing the battery pack. Max number of digits for 20 digits max. 26 digits max. ● It is recommended to hold the FOMA terminal in your hand when p h o n e n u m b e r t o b e inserting/removing the battery pack.
Page 33 ● The standby time in stationary is the average usage time when Removing the battery pack the FOMA terminal is folded and standing still while radio waves can be normally received. ● The standby time in moving is the average usage time when the FOMA terminal is folded under condition of "stationary", "moving" within the area where radio waves can be normally received, and ① ② "out of service area". ● Performing data communication or multi access or using the camera will also shorten the talk (communication) and standby times. Battery life Remove the back cover. Press the tab of the battery pack in direction ① To maintain full performance of the FOMA terminal, use the Finger tab and then lift in direction ②.
Page 34: Charging
Unplug the AC adapter from the outlet Close the external connector cap of the FOMA Charging terminal Charging the FOMA terminal NOTE ● The standard charging time is approximately 180 minutes. When the charge lamp of the FOMA terminal (Phone) flashes, ● The procedure for charging the FOMA terminal using the FOMA disconnect the AC adapter from the FOMA terminal and remove the AC Adapter 01 is taken as an example here. battery pack. Then set them again for recharging. If the charge lamp flashes again, there may be a problem or fault on the AC adapter. Contact a NTT DoCoMo shop or service counter. You can charge with the If the phone is turned off when charging starts, the charge lamp FOMA terminal folded.
Page 35: Turning The Foma Terminal On/Off
Setting the default Turning the FOMA Terminal On/Off When you turn on the FOMA terminal for the first time, the initial setting confirmation screen appears. If you select "YES", you can ● When you start using the FOMA terminal for the first time (or if set "Date setting", "Time setting", "Security code" and "Keypad it has been left unused for a long period), charge the battery. volume". ● Before turning the FOMA terminal on, make sure that the FOMA card (UIM) is inserted correctly. "YES" on the initial setting screen Turning the FOMA terminal on Set the date ･ Date setting→p.49 (1 second or longer) The FOMA terminal turns on and the standby screen appears. Set the time ■ When " 圏外" appears ･ Clock setting → p.49 You are outside the FOMA service area or in a place where radio waves do not reach. Move to a place where the radio Change your security code reception level indication such as " " ...
Page 36: Switching Between Japanese And English
"Activate" "ON"/"OFF" Enter the network <Select language> security code Switching between Japanese The Notify caller ID settings is set to on or off. and English ■ To check the Notify Caller ID setting "Status request" You can switch between Japanese and English for displaying the function names or messages on the screen or image display. <Own number> ● When you have the FOMA card (UIM) inserted, the setting of "Select language" is stored in the FOMA card (UIM). Checking Your Own Phone Number You can display and check your phone number (own number) On the standby screen [Left] (Settings) stored in your FOMA card (UIM). ...
Page 37: Making/Receiving Phone Calls
Making/Receiving Phone Calls Making a Call....................30 When you make a mistake dialing a number............30 Receiving a Call..................31 Using Public Mode (Driving Mode) ..<Public Mode (Driving mode)> If the Public mode (Driving mode) is set ............. 32 Using Public Mode (Power off) ......<Public Mode (Power off)> If the Public mode (power off) is set..............33 Notifying/Withholding Your Caller ID for Individual Calls... 34 Making International Calls ............. <WORLD CALL> Dialing a Previously Dialed Number ..........<Redial> Using the Received Calls Record ........<Received calls>...
Page 38: Making A Call
Function menu (phone number entry screen) Making a Call ● While the phone number entry screen is displayed, press [Left] to display the function menu. Dial the other party's number, Item Description starting with the area code Notify caller Sets whether to notify the other party of your caller ID. The phone number entry screen Does not notify the other party of appears. your caller ID. ･ A number of up to 57 digits can be Notifies the other party of your entered for making a call. caller ID. Cancel Prefix Notifies your caller ID according to Press the setting in "Notify caller ID" (p.28). When the other party answers the call, Prefix Select the specific numbers as phone number prefixes. the in-call screen is displayed, and you numbers You can store the specific numbers in advance.→p.51 can talk. Add to Adds the dialed phone number to the phonebook. → ■ To switch to hands-free operation phonebook p.42 during a call...
Page 39: Receiving A Call
NOTE This FOMA terminal cannot put the unanswered call on hold Receiving a Call (pressing while ringing ends the call). When you receive a call from a caller who withholds his/her A call comes in caller ID, who is unable to provide the caller ID, or who dials from a pay phone, the caller's phone number is not displayed, The FOMA terminal rings, the incoming call lamp flashes, and but the reason for not providing ID is displayed. the receiving screen appears. Unless the vibrator is set to When the call is forwarded, the number forwarding the call and the "OFF", the FOMA terminal also uses the vibration to notify you of the incoming call. number making the call are displayed. However, the number forwarding the call may not be displayed depending on the phone. ■ To turn off a ring tone Press [Left] <Public mode (Driving mode)> ■ To reject an incoming call Using Public Mode (Driving Mode) Press ...
Page 40 NOTE When a voice call is When a videophone call Service received is received The following tones do not sound in Public mode: ・ Callers from barred ・ Callers from barred ・ Ring tone for voice/videophone calls numbers hear numbers see a movie nuisance ・ Ring tone for mail/SMS message saying that announcement call ・ Ring tone for MessageR/MessageF the call could not be notifying that the call ・...
Page 41: Using Public Mode (Power Off)
● Receiving a call when network services and Public <Public Mode (Power off)> mode (power off) are set Using Public Mode (Power off) If the FOMA terminal is set to Public mode (power off) while network services are activated, voice calls or videophone calls Public mode (power off) is an automatic answering service that are handled as shown in the table below. allows you to keep good manners in public places. If you set the When a voice call is When a videophone call Public mode (power off) and then receive a call with the power Service received is received...
Page 42: Notifying/Withholding Your Caller Id For Individual Calls
<WORLD CALL> Making International Calls Notifying/Withholding Your Caller ID For Individual Calls ● For details of overseas use, refer to "Overseas Use"→ p.131 For additional information regarding WORLD CALL, refer to "The If the other party's phone supports caller ID display, you can Contact Information" provided on the back of the manual. provide your phone number (caller ID) for the other party's phone (display) when you make a voice or videophone call. Since the caller ID is important information, take care when you notify your caller ID. Dial the number in the following order: There are three types of Caller ID Notification settings. 009130→ 010→ Country code→ Area code Function Description →The other party's phone number Notify caller ID Sets whether your caller ID is provided or with - Press held when you make a call. → p.28 The international call is made to the dialed number. "186"/"184"...
Page 43: Using The Received Calls Record
Item Description On the standby screen, press Compose Composes an i-mode mail from the address The Redial list screen appears. stored in the Redial and sends it. message →p.78 ･ On the standby screen, you can also display the Redial list screen by Compose Composes an SMS from the phone number pressing [Left]→ "Phonebook" stored in the Redial and sends it.→ p.92 → "Call data" →"Redial" Delete Deletes the selected redial record. Select the desired redial Delete all Deletes all the redial records. record ※ This function is available only for the redial details screen. The Redial details screen appears.
Page 44 Item Description Select the received call entry you want to check V-phone Makes a videophone call to a phone number The Received calls details screen appears. dialing stored in the Received calls record. → p.38 On the details screen, the date and time, type of calls, call duration (ring time), caller's name and phone number are Compose Composes i-mode mail from the address stored displayed. message in the the Received calls record and sends the mail. → p.78 Press Compose SMS Composes SMS from the phone number stored The call is made to the selected number of the received calls in the Received calls record and sends it.
Page 45: Making/Receiving Videophone Calls
Making/Receiving Videophone Calls What is Videophone?................38 Videophone screen...................... 38 Making a Videophone Call ..............38 Receiving a Videophone Call ..............39 Changing Videophone Call Settings........... 40...
Page 46: What Is Videophone
Videophone call icons What is Videophone? ：A camera image is being sent ： Sent image by ×4 magnification ：A substitutive image is being sent ： Sent image by ×2 magnification You can use the videophone call function between terminals that ：An image from the front ： Sent image support the DoCoMo videophone system. camera is being sent by ×1 magnification ● DoCoMo videophone conforms to "the 3G-324M※ 1 standard set down in the international 3GPP※ 2 standards". Your FOMA ：Hands-free OFF ：An image from the rear ：Hands-free ON camera is being sent terminal cannot connect to a videophone terminal that uses a different system from the DoCoMo videophone. ※ 1： 3G-324M An international standard for 3rd-generation mobile videophones. Making a Videophone Call ※ 2： 3GPP (3rd Generation Partnership Project) A regional standardization body established to develop ...
Page 47: Receiving A Videophone Call
● If a videophone call is not connected Item Description If a videophone call was not connected, a message of the Prefix Select the specific numbers as phone number connection failure reason appears. However, in some numbers prefixes. You can store the specific numbers in circumstances, the message may not be displayed. Also, advance.→ p.51 depending on the type of phone used by the called party and Add to Adds the dialed phone number to the phonebook. the possible lack of a network service subscription, the reason phonebook →...
Page 48: Changing Videophone Call Settings
■ To send video from the rear camera Item Description Press [Right] Color mode set Select the image color from "Normal", "Sepia" and "Monochrome". ･ Each time you press , the video switches between the Front camera Switches between front camera and rear camera front camera and the rear camera. /Rear camera to send the image. ･ When you switch cameras, it may take a few seconds. ・ When you switch cameras, it may take a few seconds. ■ To switch between camera image and substitutive image Substitutiv image/ Switches the sending image between camera Press Camera image image and substitutive image ･ Each time you press , the sending image switches Own number Displays own number.→p.28 between the camera image and the substitutive image. To end the call, press ...
Page 49: Using The Phonebook
Using the Phonebook Phonebooks of the FOMA Terminal............ 42 Adding Information to the Phonebook ....<Add to phonebook> Searching the Phonebook ..........<Search phonebook> Checking the Phonebook Storage Status ..<No. of phonebook> Renaming Groups ................<Group setting> Storing Your Personal Data ............ <Own number> Using Dialing Shortcuts .............<Quick dialing>...
Page 50: Phonebooks Of The Foma Terminal
<Add to phonebook> Phonebooks of the FOMA Terminal Adding Information to the Phonebook Your FOMA terminal contains two phonebooks. One is the phonebook in the FOMA terminal (Phone) itself, for which you can set a range of functions, and the other is the UIM phonebook, On the standby screen "Add to phonebook" which can also be used in other FOMA terminals. The table below shows the data storage capabilities. "Phone"/"UIM" Enter a name A name can contain up to 16 full-pitch, 32 half-pitch in the FOMA terminal (Phone) ...
Page 51 Item Description NOTE Enter an e-mail address and select a cate - E-mail address If you delete the original data of an image that is stored in the gory icon. phonebook, the data stored in the phonebook is also deleted. The settings of the image stored in the phonebook will be ・ An e-mail address can be up to 50 digits enabled when the "Disp phonebook img" in the settings menu both in the Phone phonebook and UIM is set to "ON". →p.48 phonebook respectively. The "Call rejection" setting of each phonebook entry will be ・ No category icon in the UIM phonebook. enabled when the "Call rejection" in the phonebook menu is Once you have stored the e-mail address, set to "ON".
Page 52: Searching The Phonebook
Select the phonebook you want to check <Search phonebook> The phonebook detail screen appears. Searching the Phonebook ■ To make a call from the phonebook list screen Select a phonebook On the standby screen "Search phonebook" If the selected phonebook entry contains multiple phone numbers, the call is made to the first number Select a search method from the list below and search Check the phonebook details When the search ends, the phonebook ■ To make a voice call from the phonebook detail screen list screen that meets the search Select a phone number criterion appears. " " appears for the ■ To make a videophone call from the phonebook detail Phone ...
Page 53: Checking The Phonebook Storage Status
Function menu (phonebook detail screen) <No. of phonebook> Checking the Phonebook ● While the phonebook detail screen is displayed, press [Left] to display the function menu. Storage Status Item Description Notify caller Select whether or not to notify the other party of On the standby screen "No. of phonebook" your caller ID. Each number of entries, available (Free) and stored (Used) on Does not notify the other party. the UIM (phonebook stored on the FOMA card (UIM)) and the Phone (phonebook stored on the FOMA terminal) appears Notifies the other party. respectively. Cancel prefix Notifies the other party of your caller ID according to the "Notify <Group setting> caller ID" (p.28) setting Renaming Groups Prefix Select the specific numbers to add to the phone numbers number. The specific numbers can be stored in ● You cannot rename the group name of "Group 0". advance.
Page 54: Storing Your Personal Data
<Own number> Storing Your Personal Data You can register your personal data (name, reading and e-mail address). On the standby screen "Own number" [Left] Enter your security code Set the following items Item Description Name Enter your name. Reading Enter the reading of the name. ・ Entering your name does not set the reading automatically. Mail address Enter an e-mail address. [Left] <Quick dialing> Using Dialing Shortcuts By assigning memory numbers "002" to "009" to phone numbers in the Phone phonebook, you can quickly make a voice call to those phone numbers simply by pressing one of the number keys ...
Page 55: Settings
Settings Setting the Ring Tone ............<Incoming/Volume> Setting the Date and Time ..............<Clock> Setting Manner mode ..............<Manner mode> Changing the manner mode..................49 Setting the Original manner mode ................ 49 Setting the Display and Light ............<Display> Setting Talk Functions ................<Talk> Setting Lock/Security ............<Lock/Security> Setting Network Functions ........<Connection setting> Setting Videophone ............... <Video-phone> Setting Other Functions ............<Other settings> ...
Page 56: Setting The Ring Tone
Item Description <Incoming/Volume> Setting the Ring Tone Answer Sets the functions that enable you to answer a setting call immediately. You can set the incoming call related functions such as ring tone, Any key Y o u c a n a n s w e r a n i n c o m i n g its volume and vibration pattern. answer voice call by pressing not only , but also , , ...
Page 57: Setting The Date And Time
<Clock> <Manner mode> Setting the Date and Time Setting Manner mode You can set the clock related functions such as date, time and the You can change the manner mode type or set details for the clock display pattern. original manner mode. Pressing (Manner) on the standby screen more than one On the standby screen [Left] (Settings) second will set the manner mode selected in this feature. ● You can also switch the manner mode on or off by pressing "Clock" for more than one second during voice call or videophone call. Set the following items Selecting the manner mode Item Description On the standby screen ...
Page 58: Setting The Display And Light
Item Description Item Description Ring tone Sets the ring tone for incoming calls, videophone Stand-by Sets the image for the standby screen. calls, mail, SMS (Short Message), MessageR and display Sets whether to display the calen - Calendar MessageF during manner mode. dar with the selected image as ・ Press [Left] to replay the ring tone while the background on the standby selecting the ring tone. screen. Vibrator Sets a vibrating pattern for incoming voice calls, My picture Selects from the images pre- videophone calls, mail, SMS (Short Message), installed, downloaded i-mode site, MessageR and MessageF during original manner etc., or shot by the camera in the mode.
Page 59: Setting Talk Functions
<Talk> <Lock/Security> Setting Talk Functions Setting Lock/Security You can set the talk related functions such as automatic redial, You can set the security related function such as locking the specifying certain numbers and displaying the call duration. FOMA terminal and changing the security code. On the standby screen [Left] (Settings) On the standby screen [Left] (Settings) "Talk" "Lock/Security" Set the following items Set the following items Item Description Item Description Automatic Sets whether to redial a number automatically redial when a call was not answered, All lock "Preventing Others from Using Your Terminal"...
Page 60: Setting Network Functions
<Connection setting> <Video-phone> Setting Network Functions Setting Videophone You can set the network related functions such as the search You can set the videophone related functions such as the display method of operators within the network and priority setting of contents of the main screen, image quality and color mode. operators. On the standby screen [Left] (Settings) On the standby screen [Left] (Settings) "Video-phone" "Connection setting" Set the following items Set the following items Item Description Item Description Disp. set V-phone...
Page 61 Item Description NOTE Charge sound Sets whether to sound an alarm when starting or There will be no alarm for the start/completion of charging in completing to charge. the following cases, despite the Charge sound setting: CHR input Sets the method to use the input text. ・ When a screen other than the standby screen is displayed method Prediction Sets whether to display the predicted ・ While in Public mode candidates when you input text. ・ While in Manner mode ・ When the phone is turned off Clear learned Returns the learnt text in the FOMA ・ When the Ring volume is set to Level 0 terminal to the default setting. Illumination Sets the incoming call lamp flashing mode while receiving calls. Sets the color and flashing pat - Illumination tern for incoming call lamp, while receiving voice call, videophone call, mail, SMS (Short Message), MessageR and MessageF. Illumination Sets the flashing color during talk voice call and videophone call.
Page 63: Security Settings
Security Settings Security Codes Used on the FOMA terminal........56 Changing Your Security Code ......... <CHG security code> Changing PIN Code ................<PIN setting> Preventing Others from Using Your Terminal ....<All lock> Preventing Unwanted Mail Display ........<Mail security> Enabling Call Rejection ...............<Call rejection>...
Page 64: Security Codes Used On The Foma Terminal
● Network security code The security code is a 4-digit number that you specify when you Security Codes Used on the apply to use DoCoMo e-site or use various network services. You FOMA Terminal can change your security code. If you have "My DoCoMo ID/Password" for "My DoCoMo" a total Some functions in the FOMA terminal require a security code to support website for PC access, you can apply for change to a new make is useful. The code includes the ones for various operations, network security code from a PC. network security code for network service, i-mode password, etc. From i-mode, you can also apply for change to a new network Make ...
Page 65: Changing Your Security Code
When the PIN1 code or PIN2 code entry <CHG security code> screen appears, enter a 4-to-8-digit PIN1/ Changing Your Security Code PIN2 code, and press ● The entered PIN1/PIN2 code is shown in "★" on the display, and the actual numbers On the standby screen [Left] (Settings) are not shown. "Lock/Security" ● If you enter your PIN1/PIN2 code incorrectly 3 times, PIN1/PIN2 code is locked and you "CHG security code" Enter your security code are unable to use the code (the remaining Enter a new security code Enter ...
Page 66: Preventing Others From Using Your Terminal
● Releasing PIN lock <Mail security> If you enter your PIN1 or PIN2 code incorrectly 3 times in total, a Preventing Unwanted Mail message appears notifying you that the respective PIN1 or PIN2 code has been locked, and when PIN lock is set, the PUK code entry screen Display then appears. If this occurs, you must enter the 8-digit PUK code and This function enables you to apply security measures to your Inbox, unlock the locked PIN1 or PIN2 code and then set a new PIN1 or PIN2 Outbox, or Draft so that their contents cannot be viewed by other code. people without your approval. Mailboxes with security set cannot ● For your PUK code, refer to the FOMA terminal contract be opened unless the security code is entered. (customer copy) that you received when you subscribed to the FOMA terminal. If you enter your PUK code incorrectly 10 times On the standby screen ...
Page 67: Camera
Camera Before Using the Camera............... 60 Shooting Still Images ..........<Photo mode>61 Shooting Movies ............<Movie mode>63...
Page 68: Before Using The Camera
● Image quality may be adversely affected if the FOMA terminal is left in a warm location for a long time. Before Using the Camera ● Do not leave the camera under direct sunlight for a long time or shoot directly the sun or a powerful lamp. Doing so may lead to You can use the built-in camera on the FOMA terminal to shoot still the discoloration of the photographed images or cause the images and movies. camera to malfunction. ● Using the camera Notes on using the camera ・ Shooting Still Images→p.61 ・ Shooting Movies→p.63 ■ Notes on shooting To switch between the front camera and the rear camera, press ● The color and brightness in still images or movies shot with the [Left] on the shooting screen, then select "Front camera" or built-in camera may differ from those of the actual object. "Rear camera" from the function menu. ● Note that shooting directly the sun or a powerful lamp may lead to the photographed images looking dark or blurred. ■ Rear camera ■ Front camera ●...
Page 69: Shooting Still Images
<Photo mode> Guide to the shooting screen Shooting Still Images The shooting screens display the icons of the camera settings. Photo mode shooting Movie mode shooting On the standby screen [Left] (Camera) "Photo mode" The Photo mode screen appears. ④ ④ The incoming call lamp lights in blue ⑦ ③ ③ while the photo mode screen ⑧ ② ② ⑤ ⑤ ① ① ⑥ appears. ⑨ ■ To adjust the brightness to adjust the brightness ① Indicates the camera mode. ④ ■ To use the zoom :Photo mode Indicates the brightness of the to adjust the zoom...
Page 70 Item Description Function menu (Photo mode screen) Brightness Chooses the brightness among 5 levels from "-2" ● While the Photo mode screen is displayed, press [Left] to to "+2". display the function menu. CHG camera- Shoots the continuous images or uses the auto Item Description mode timer. Front camera Switches between the front camera and the rear Photo mode Returns to the Photo mode screen. /Rear camera camera. →p.60 Continuous Shoots still images continuously. Movie mode Changes to the Movie mode. mode Set the number of shots. Select size Select the image size from VGA (640 × 480), Auto timer ...
Page 71: Shooting Movies
<Movie mode> Function menu (Movie mode screen) Shooting Movies ● While the Movie mode screen is displayed, press [Left] to display the function menu. Use the built-in camera to shoot a movie with voice. Item Description On the standby screen Front camera Switches between the front camera and the rear /Rear camera camera. → p.60 [Left] (Camera) Photo mode Changes to the Photo mode. "Movie mode" Select size Select the image size for shooting a movie from The Movie mode screen appears. Large (176 × 144) or Small (128 ×96). The incoming call lamp lights in blue File size Sets the file size for the movie shooting. while ...
Page 72 Item Description Brightness Chooses the brightness among 5 levels from "-2" to "+2". Zoom Select the zoom setting for shooting. Movie type Normal Records video and voice. Video Shoots a movie without any voices. Voice Records a voice without movies. Function menu (movie checking screen) ● While the Movie checking screen is displayed, press [Left] to display the function menu. Item Description Play Plays the movie you shot. Save Saves the movie in the Camera folder under "i- motion". Compose Composes an i-mode mail message with the message movie attached. → p.78 NOTE Note that if you press any keys to perform a function during the shooting, the sound may be recorded.
Page 73: I-Mode
i-mode What is i-mode? ..................66 Viewing Sites/Websites................67 Viewing sites ......................... 67 Viewing websites ......................68 Adding bookmarks ....................... 69 Saving site content..................... 70 Using the Phone To, Mail To and Web To functions ........71 Downloading Data from Sites ............... 72 Using Message Service Functions <Message R/Message F>73 Viewing messages ...................... 73 Checking for messages..................... 75 Specifying Your i-mode Settings ....<i-mode settings>76...
Page 74: What Is I-Mode
i-mode is a charged service to which you must subscribe. For information on subscribing to i-mode, What is i-mode? refer to the back cover of the manual. The i-mode service enables you to use an i-mode-compatible FOMA terminal (i-mode terminal) display to access online services such NOTE as i-mode mail and connection to the Internet and i-mode sites (programs). New subscribers to FOMA services can access all the ■...
Page 75: Viewing Sites/Websites
Item Description "Downloading Images from Sites and Mes - Viewing Sites/Websites Save graphics sages" → p.72 Viewing sites Display Displays the URL of the property displayed page. You can access the services provided by an IP (information service Page Displays the detail information provider). (You may need to subscribe.) properties on the displayed page. On the standby screen "iMenu" Certificate Displays the SSL certificate details when the displayed page "Menu List" Select a site supports SSL. The Site screen appears. Bookmark Displays the Bookmark folder list screen. You When SSL pages are displayed, " " appears. can display an i-mode site or website using a ■ To cancel viewing bookmark. → p.69 During the site viewing, Go to location Enter a URL to connect to the website.
Page 76 Viewing websites NOTE Some websites may not be displayed correctly except for This function enables you to view any website simply by entering i-mode-compatible websites. its URL. Some websites may not be displayed correctly on the FOMA ● The number of the characters you can enter is up to 256 (half- terminal. pitch) including "http://" or "https://". On the standby screen "Go to location" Function menu (URL history screen) ● While the URL history screen is displayed, press [Left] to "Enter URL" Enter URL display the function menu. Reconnecting to the last displayed page <Last URL> Item Desctiption When you end an i-mode session, the URL of the last website Go to location Connects to the website with selected URL.
Page 77 Adding bookmarks Function menu (Bookmark list screen) Adding frequently visited sites to your Bookmark folders enables ● While the Bookmark list screen is displayed, press [Left] to you to access those sites quickly and easily. display the function menu. ● You can bookmark up to 100 sites. Item Description ● The number of the characters per a URL you can add to your Go to location Connects to the website with selected bookmark is up to 256 (half-pitch). You cannot add to your bookmark. bookmark if a site exceeds 256 (half-pitch) characters.
Page 78 Saving site content Item Description Protect ON/ Protects or unprotects the highlighted screen You can save the displayed page on your FOMA terminal as a memo. screen memo for later reference. ● You can save up to 10 screen memos. However, the number you Function menu (Screen memo detail screen) can actually save varies depending on the amount of data on each saved page. ● While the Screen memo detail screen is displayed, press [Left] to display the function menu. "Sites screen" (p.67) [Left] Item Description "Screen memo"...
Page 79 Using the Phone To, Mail To and Web To functions NOTE These functions provide quick and simple procedures for making You may be unable to use the Phone To, AV Phone To, Mail voice/videophone calls or sending mails and viewing websites To or Web To functions on some websites. using information (phone numbers, e-mail addresses and URLs) You may be unable to use the Phone To, AV Phone To, Mail displayed on a site or in the body of an e-mail message. To or Web To functions with some mails sent from a PC, etc. Phone To function You can make a voice call or videophone call to a phone number displayed on a site or in the body of an e-mail message. ● When used for videophone calls, this function is called the AV Phone To function. <Example: Making a voice call to a number displayed on a site> "Sites screen" (p.67) Select a phone number "Voice phone" ■ To make a videophone call "Video-phone" Mail To function You can send a mail to a mail address displayed on a site or in the body of an e-mail message.
Page 80: Downloading Data From Sites
Downloading Data Files from Sites Downloading Data from Sites You can set and use your favourite melody as a ring tone on your FOMA terminal by downloading and saving a data file such as melody file. Downloading Images from Sites and Messages ● To set the melody as a ring tone→p.48 You can save an image displayed on a site, screen memo, <Example: Downloading melodies from sites> MessageR or MessageF and then set the saved image on the standby screen or other screen.
Page 81: Using Message Service Functions
<Message R/Message F> How to view the Message R and Message F screens Using Message Service Functions The Message R and Message F screens appear as shown below. ● Some of the icons displayed on the Message R and Message F Viewing messages list screens are also shown on the Message R and Message F detail screens. Some icons are not displayed. When You Receive a Message ③ ① When the FOMA terminal is in an i-mode service area, MessageR ④ and MessageF are automatically sent to the FOMA terminal from ④ the i-mode Center. ② ● The FOMA terminal will save up to 20 received MessageR and 10 MessageF respectively. When a message is received, the " (orange)" List screen List screen Detail screen or " (yellowish green)" icon flashes and the (2 lines display) (1 line display) "Message R Receiving..." or "Message F ①...
Page 82 Function menu (message list screen) Function menu (message detail screen) ● While the message list screen is displayed, press [Left] to ● While the message detail screen is displayed, press [Left] to display the function menu. display the function menu. Item Description Item Description Delete Deletes the highlighted MessageR/MessageF. Delete Deletes the MessageR/MessageF displayed on Delete Deletes multiple MessageR/MessageF. the message detail screen. selected Select a check box of the message to delete Protect ON/ Protects or unprotects the MessageR/MessageF [Left] "Delete" "YES" displayed on the message detail screen. Delete Deletes all the stored MessageR/MessageF. Add to Highlights the mail addresses or phone numbers Enter your security code "YES"...
Page 83 Checking for messages ● MessageR and MessageF delivered to the i-mode Center are automatically sent to your FOMA terminal. However, your messages are held at the i-mode Center when the FOMA terminal is turned off, " " is displayed or Message boxes are full. ● Use "Set check new msg." (p.76) to specify which items are checked for.
Page 84: Specifying Your I-Mode Settings
● Certificate setting <i-mode settings> Checks SSL certificates details or sets the certificate to be Specifying Your i-mode Settings valid/invalid. ● Home URL setting "i-mode settings" "Certificate" You can set the home URL and whether or not to enable the home URL display (Default setting: "Invalid"). Highlight the certificate to be Valid/Invalid On the standby screen "i-mode settings" [Left] "Valid/Invalid" The i-mode settings screen appears. ■ To check the details of the certificate "Home URL" "Valid" Highlight the certificate to check ■ To invalidate the home setting [Left] "Certificate info" "Invalid" ● Other settings Select Home URL box Enter the home URL "OK"...
Page 85: Mail
Mail What is i-mode Mail?..................78 Composing and Sending i-mode Mail ......<Compose message/Send> Attaching files to i-mode mail ................. 80 Sending draft i-mode mail ..................81 Reading/Replying to/Forwarding i-mode Mail....<Receive/Reply/Forward> Displaying i-mode mail ....................82 Receiving i-mode mail selectively ................83 Checking for i-mode mail ................... 83 Replying to i-mode mail....................84 Forwarding i-mode mail to other recipients ............84 Playing and saving data attached in i-mode mail ..........85 Displaying i-mode mail in the Inbox and Outbox..........86 Setting Up the Mail Functions ............ <Mail settings> Composing and Sending SMS(Short Message) ....<Compose SMS/Send> Sending draft SMS (Short Message) ..............93 Reading/Replying to/Forwarding SMS (Short Message)..
Page 86: What Is I-Mode Mail
・ How to send an i-mode mail → p.78 ・ How to receive an i-mode mail →p.82 What is i-mode Mail? <Compose message/Send> Subscribing to i-mode, as well as allowing you to exchange mail Composing and Sending i-mode with other i-mode terminals (including mova phones), also lets you send and receive e-mail messages via the Internet. Mail For details, refer to the "i-mode User's Manual" provided when you subscribed to i-mode. On the standby screen Your mail address when you subscribe to i-mode is determined as described below. [Right] "Compose ■ New i-mode subscribers message" The part before the @ symbol in your e-mail address is randomly The New mail screen appears. created using a combination of alphanumeric characters. You "...
Page 87 NOTE Item Description Add receiver You can enter up to 5 addresses in the You can store up to 100 mails in total for sent mails and "To," "Cc" and/or "Bcc" field(s). stored mails. If the total number of sent mail and stored mail items stored Quote A d d s a n e - m a i l a d d r e s s b y on the FOMA terminal exceeds the limit on the number or the phonebook searching the phonebook.→p.44...
Page 88 Attaching files to i-mode mail "New mail screen"(p.78) [Left] The table below shows the files that can be attached to i-mode "Attach file" mail. Item Description Max. files File type attached to 1 Comments Attach file Select a file from a folder of "My picture", mail "i-motion" or "Melody". Melody You can attach up to 10 image Delete attached Deletes the attachment file. or melody files in all, up to a ※ 1 Image Check attached Displays an attached image or plays an t o t a l ...
Page 89 Sending draft i-mode mail Item Description Sort Sorts mail according to the specified criteria. This feature enables you to edit and resend a message that you have saved earlier. By subject ↑ Sorts by ascending order of the subject. On the standby screen By subject ↓ Sorts by descending order of the subject. [Right] "Draft" By address ↑ Sorts by ascending order of the The Draft mail list screen screen address of the sender. appears. By address ↓ Sorts by descending order of Select a mail Edit the the address of the sender. address, subject or message Chronological ↓ Sorts in chronological order. body, and then send the mail Chronological ↑...
Page 90: Reading/Replying/Forwarding I-Mode Mail
<Receive/Reply/Forward> Displaying the new i-mode mail Reading/Replying/Forwarding On the standby screen " " i-mode Mail Displaying i-mode mail When you receive i-mode mail When the FOMA terminal is in a service area, i-mode mail is automatically sent to the FOMA terminal from the i-mode Center. ● The FOMA terminal will hold up to 200 received i-mode mails. When you receive an i-mode mail, the " "(gray) icon flashes and the "Mail Receiving..." message appears Select a received mail Select "Mail" to display the received mail list screen. NOTE Characters that cannot be displayed appear as spaces. If the number of characters in the i-mode mail message body exceeds the maximum number of characters permitted, either "/" or "//" is inserted at the end of the message and the remaining portion is automatically deleted.
Page 91 Receiving i-mode mail selectively Checking for i-mode mail You can check information such as the subject lines of mail held ● i-mode mail held at the i-mode Center is automatically sent to at the i-mode Center and then select the mail you want to receive your FOMA terminal. However, when the FOMA terminal is turned or delete items of mail at the i-mode Center before receiving your off, when you are outside the service area, or when the Inbox is mail. full, your mail is held at the i-mode Center. ● To use this function, you must first select "ON" in "Receive ● Use "Set check new messages"(p.90) to specify which items are option setting" (p.90). checked for. On the standby screen [Right] On the standby screen [Right] "Receive option" "Check new message" For further procedure, refer to "i-mode User's Manual". Check for each count of the i-mode mails or the ● When an i-mode mail arrives MessageR and MessageF messages which were When the i-mode Center notifies you of mail reception, the newly received "...
Page 92 Replying to i-mode mail Forwarding i-mode mail to other recipients ● A reply has "Re:" automatically inserted at the beginning of the subject. ● Forwarded mail has "Fw:" automatically inserted at the beginning of the subject. "Received mail detail screen"(p.86) [Left] "Reply" "Reply" Edit the subject "Received mail detail screen"(p.86) [Left] and message body and send it "Forward" Enter an e-mail address For details of the subsequent procedure, see steps 3 to 5 on For detailed information on entering addresses →p.79 p.78. You can edit the subject and/or message body before ■ To send a reply to all the broadcast addresses forwarding i-mode mail. "Reply" "Reply all" [Left] "Send"...
Page 93 The image is automatically saved to the "INBOX" folder in My Playing and saving data attached in picture. i-mode mail ■ When there is no more space for saving images Delete unnecessary images and then save images. Playing and saving a melody in i-mode mail ■ To save a large still image Use this procedure to save a melody attached to or pasted into When you receive an i-mode mail, the large still image is not received i-mode mail on your FOMA terminal. saved to the FOMA terminal. This function downloads the ● If the sender was not using a FOMA N600i, the received melody image from the i-mode Center and saves it on your FOMA may not play correctly. terminal. <Example: To save an attached melody> "Received mail detail screen" Select a URL "Received mail detail screen"(p.86) Highlight a "YES" [Left] "Save graphics" file name of the melody Playing and saving i-motion from i-motion mail [Left] "Save melody" "YES" When you receive an i-motion data sent as i-motion mail, the data A title of the melody to be saved is displayed, and you can edit is not downloaded to the FOMA terminal when you receive mail. the title.
Page 94 ● Guide to the folder list screens Displaying i-mode mail in the Inbox and Outbox ① : Contains no unread mail. ② ② : Contains unread mail. The FOMA terminal will hold up to 200 i-mode mails for received ① mails and up to 100 i-mode mails in total for sent and draft mails. The number of mail messages that can be saved and protected varies depending on the amount of data in each message. <Example: Reading a received mail message> Inbox folder screen On the standby screen [Right] "Inbox" ● Guide to the mail list screens Select a folder Select a mail ① : Unread mail ② ② : Read mail : Replied-to mail ①...
Page 95 ● Guide to the mail detail screens : Attached or pasted file or data cannot be used because a different ①:Receive ① FOMA card (UIM) was used when the : Received mail ② mail was sent or received. ③ ⑩: Transmission : Replied-to mail ④ : Mail sent successfully : Forwarded mail ⑤ ⑥ ② :Protected mail : Mail sent unsuccessfully ③: Shows the sender/recipient. ⑦ ⑧ ④: Shows the sender type/recipient type. Function menu (Inbox folder screen) ⑨ : Sender who addressed the mail ● While the Inbox folder screen is displayed, press [Left] ...
Page 96 Function menu (received mail list screen) Function menu (sent mail list screen) ● While the received mail list screen is displayed, press [Left] ● While the sent mail list screen is displayed, press [Left] to to display the function menu. display the function menu. Item Description Item Description Move Moves the highlighted mail to another folder. Edit Edits the highlighted mail and sends it. Select the destination folder Edit the address, subject or message body [Left] "Send" Delete Deletes the highlighted mail. Delete Deletes the highlighted mail.
Page 97 Function menu (received mail detail screen) Function menu (sent mail detail screen) ● While the received mail detail screen is displayed, ● While the sent mail detail screen is displayed, press [Left] to press [Left] to display the function menu. display the function menu. Item Description Item Description Reply "Replying to i-mode mail" →p.84 Edit Edits a mail and sends it. Edit the address, subject or message body Forward "Forwarding i-mode mail to other recipients" [Left] "Send" →p.84 Delete Deletes the displayed mail. Move Moves the currently displayed mail to another folder. Protect ON/ Protects or unprotects the displayed mail. Select the destination folder Delete Deletes the currently displayed mail. Save address Adds the e-mail address of a recipient specified in a sent i-mode mail to your phonebook.
Page 98: Setting Up The Mail Functions
● Edit settings <Mail settings> "Mail settings screen" "Edit settings" Select Setting Up the Mail Functions any item ● Communication settings On the standby screen [Right] Item Description "Mail settings" Signature Stores your name or other information to be added at the end of an i-mode mail message "Receive settings" body (signature) (Default setting: Not insert). Select the "Insert" checkbox Select the The Mail settings screen appears. signature box Enter your signature "OK" Select any item To compose mail without adding a signature automatically D e s e l e c t t h e " I ns er t " c h e c k b o x f o r t h e Item Description signature "OK"...
Page 99 Item Description Mail security Enables you to apply security measures to your Inbox, Outbox or Draft so that their contents cannot be viewed by other people without your approval. Mailboxes or folders with security set cannot be opened unless the security code is entered (Default setting: None). Enter your security code Select a checkbox of the mailbox you want to apply security measures "OK" To cancel security measures Enter your security code Select a checkbox you want to deselect "OK" Automatic play Se ts whether to automatical ly play the attached or pasted melody when opening an i-mode mail (Default setting: "ON"). Pasted data Sets whether to enable the melody pasted to a received i-mode mail (Default setting: "Pasted melody").
Page 100: Composing And Sending Sms (Short Message)
● SMS (Short Message) report <Disp. SMS report> <Compose SMS/Send> If "ON" is selected in "SMS report request" (p.93), you receive an Composing and Sending SMS SMS report after you send an SMS. SMS reports are saved in the Inbox, enabling you to check whether the message (Short Message) successfully reached the recipient. To view an SMS with an SMS report, select the SMS report ● This service allows you to exchange text messages with icon) in the received mail list screen. subscribers to overseas carriers other than DoCoMo.
Page 101: Reading/Replying To/Forwarding Sms (Short Message)
Item Description <Receive/Reply/Forward> SMS report Sets whether to request an SMS report Reading/Replying to/Forwarding request after sending an SMS. SMS (Short Message) Sending draft SMS (Short Message) Displaying SMS (Short Message) You can edit and send the draft SMS. When you receive an SMS (Short Message) On the standby screen [Right] "SMS" When the FOMA terminal is in a service area, SMS is automatically "Draft" sent to the FOMA terminal from the SMS Center. The draft SMS list screen appears. ● The FOMA terminal will hold up to 200 SMS (total of received SMS, sent SMS and draft SMS). Select an SMS ● Short mail sent from the phone such as a mova terminal is Edit the address or message received on the FOMA terminal as SMS. body and then send the mail When ...
Page 102 Displaying SMS (Short message) in the Viewing received SMS (Short Message) Inbox and Outbox On the standby screen " " The number of SMS that can be saved and protected varies depending on the amount of data in each message. <Example: Reading a received SMS> On the standby screen [Right] "SMS" "Inbox" Select an SMS Select a received SMS NOTE Characters that cannot be displayed appear as spaces. SMS report is sent to you only when the FOMA terminal is set SMS menu screen Mail menu screen to "ON" in "SMS report request" (p.93). Checking for SMS (Short Message) ● SMS that arrive at the SMS Center are automatically sent to your ...
Page 103 ● Guide to the SMS list screens Function menu (received SMS/sent SMS list screen) ① : Unread SMS ● While the received SMS/sent SMS list screen is displayed, ① : Read/sent SMS press [Left] to display the function menu. : Unread SMS in the FOMA card (UIM) Item Description : Read SMS in the FOMA card (UIM) ② Read Displays the highlighted SMS detail screen. : Unread SMS report : Read SMS report Delete Deletes the highlighted SMS. : Unread SMS report in the FOMA card Delete all Deletes all the received SMS/sent SMS. (UIM) Enter your security code "YES" Received SMS list screen :Read SMS report in the FOMA card (UIM) ② :Shows the sender/recipient. Function menu (received SMS detail screen) ①...
Page 104: Specifying Sms (Short Message) Settings
NOTE <Set SMS> Since you cannot protect SMS, be careful when you delete an Specifying SMS (Short Message) SMS or all the SMS. Settings You cannot reply to an SMS when the sender has withheld his or her caller ID (User unset) or is sending from a payphone (Payphone) or a phone that does not support Caller ID On the standby screen [Right] "SMS" Notification (Not support). "SMS settings" Select any item You cannot reply to or forward an SMS report (p.92) and Voice Mail notices. For more details of Voice Mail notices, refer to the "Network Services Operation Guide".
Page 105: I-Αppli
i-αppli What is an i-αppli? ..................98 Downloading i-αppli from Sites............98 Running i-αppli ................... 99 Pre-installed software................99 Setting i-αppli..................... 99 Setting αDisplay light .................... 100 Setting αVibrator ..................... 100 Viewing the info on Auto start failure ............... 100 Upgrading i-αppli..................100...
Page 106: What Is An I-Αppli
What is an i-αppli? Downloading i-αppli from Sites By downloading i- αppli from sites, you can make your i-mode- You can download software from an i-mode site and run the software on your FOMA terminal. compliant FOMA terminal (i-mode terminal) even easier to use. For ● The FOMA terminal will hold up to 50 downloaded software example, you can download a range of games to an i-mode terminal applications. However, depending on the application data, the and play them or download an i-αppli that provides stock market actual number of downloadable i-αppli programs varies. information and allows you to automatically check stock prices at set intervals. There are also mapping i-αppli that allow you to While a site is displayed Select software download only the information you need so that scrolling is quick...
Page 107: Running I-Αppli
Item Description Running i-αppli Auto start If the software can be launched automatically, sets whether or not to allow the software to start automatically at the interval specified by the soft - On the standby screen [Left] ware. (i-αppli) "Software list" ・ As for the interval of Auto start set, refer to its software information. The Software list screen appears. Sets whether or not to display the software infor - Disp. Select a software to launch soft info mation when downloaded. ● Quitting i-αppli Trace info Displays the software trace information. To delete the trace information "YES" [Left] "YES" Function menu (Software list screen) Displays the software storage (Free/Used) informa - System info [Left] tion. ● While the Software list screen is displayed, press to display the function menu.
Page 108: Setting I-Αppli
ボトルレター (Bottle Letter) Setting αVibrator This is a game to connect channels to deliver a letter in bottle from On the standby screen [Left] the start to the goal. (i-αppli) "αVibrator" On the standby screen Select "Depend on system" or "Depend on [Left] (i-αppli) software" "Software list" If you select "Depend on system", the FOMA terminal does not vibrate regardless of the specified settings in "Vibrator" "ボトルレター (Bottle Letter)" (p.48). Select "Depend on software", if you want it vibrate according to the software setting. "ゲーム開始 (Start game)" The game launches. Viewing the info on Auto start failure ■ To display how to play in detail On the standby screen ...
Page 109: Data Box
Data Box Displaying Still Images ..........<My picture> 102 Playing Movies/i-motion..........<imotion> 104 Operation during the i-motion playback ............106 Playing Melodies ..............<Melody> 106 Operation during the melody playback.............. 108...
Page 110: Displaying Still Images
Item Description <My picture> Displaying Still Images Set as Sets the highlighted image as the standby stand-by screen. Still images shot with the built-in camera or downloaded and Image info Displays detailed information of the image such stored from websites or mail are categorized into the folders of My as the file name and file size. picture under the Data box. Compose Composes a mail with the highlighted image message attached. →p.78 On the standby screen [Left] Delete Deletes the highlighted image. (Data box) "My picture" Delete all Deletes all the images in the folder.
Page 111 Function menu (My picture screen) Guide to the Title list and Picture list ● While the My picture screen is displayed, press [Left] to ■ Title list The titles of nine images are listed on select the function menu. the screen. Icons show the image type. Item Description Displays a slide show of the images in the cur - Slide show rent folder. Set as Sets the displayed image as the standby screen. stand-by Image info Displays the detailed information of the image such as the file name and file size. Compose Composes a mail with the displayed image ■ Picture list message attached. →p.78 Four images appear as thumbnail, and the title and the image type (icon) of Delete Deletes the displayed image.
Page 112: Playing Movies/I-Motion
Item Description <imotion> Playing Movies/i-motion imotion info Displays detailed information of the movie such as the file name and file size. Movies that you have shot or i-motion downloaded from i-mode site Compose Composes a mail with the highlighted movie or Internet website can be played in imotion under Data box. message attached. →p.78 ● "Storage capacity and number of items in Data box"→p.102 Reset title Restores the title to the original. ● "Downloading i-motion from sites to play or save"→ p.72 Delete Deletes the highlighted movie. ● "Checking the storage status of Data box"→p.103 Delete all Deletes all the movies in the folder. Enter your security code "YES" On the standby screen [Left] Delete Deletes multiple movies. (Data box) "imotion" selected Select the movie to delete [Left] "Delete selected" "YES"...
Page 113 Function menu (i-motion stopped (pause) screen) Guide to the Title list and Picture list ● While the i-motion stopped (pause) screen is displayed, ■ Title list The titles of the nine movies are listed press [Left] to display the function menu. on the screen. Icons show the movie Item Description type. Play If the playback is paused, the i-motion is replayed from the paused point. Slide show Plays all the movies in the folder continuously. Fast forward Fast forwards the movie. Returning to the normal playback Press to pause [Left] "Play" ■ Picture list Rewind play Rewinds the i-motion. The screen shows a preview screen of Returning to the normal playback a movie, and the title and movie type Press to pause [Left] "Play"...
Page 114: Playing Melodies
Operation during the i-motion playback <Melody> Playing Melodies You can perform the following operations during i-motion playback. The preinstalled melodies, sound effects or the melodies Operation key Action downloaded from sites can be played in the Melody folder under Pauses/resumes playback Data box. ● "Storage capacity and number of items in Data box"→ p.102 Adjusts the volume by five levels from level 0 to 4 (the volume level does not ● "Checking the storage status of Data box" → p.103 appear). Plays the previous or next movie/i-motion On the standby screen [Left] (Data box) [Left] Fast forwards/returns to normal playback...
Page 115 Item Description Function menu (melody list screen) Sorts melodies according to the specified crite - Sort ● While the melody list screen is displayed, press [Left] to ria. display the function menu. Chronological Sorts from the latest saved file. Item Description ↑ Rename Edits the file name or title of the highlighted Chronological Sorts from the oldest saved file. melody. ↓ To edit the file name By title ↑ Displays in order of titles [Number "Edit file name" Edit the file name (123)→Alphabet (ABC)→Hiragana To edit the title (あいう ) → Kanji]. "Edit title" ...
Page 116 Guide to the Melody list ■ Melody list The titles of the nine melodies are listed on the screen. Icons show the melody type. ● Melody type icons Icon Description MFi-formatted melody SMF-formatted melody MFi-formatted melody with file restriction SMF-formatted melody with file restriction Melody to which the FOMA card (UIM) opera - tional restriction applies Operation during the melody playback You can perform the following operations during melody playback. Operation key Action Pauses/resumes playback Adjusts the volume ・ Five volume levels from 0 to 4 are available. ...
Page 117: Other Useful Functions
Other Useful Functions Multi Access ..................<Multi Access> Multi access combination patterns ..............110 Using Schedule Function .............. <Schedule> Viewing the scheduled events................111 Adding schedule entries ..................111 Setting the Alarm Clock ............<Alarm clock> Using Calculator ................<Calculator> Composing Text Memo .............. <Text memo> Using Common Phrases ..........<Common phrases> Storing Frequently Used Words ......... <Own dictionary> Using a Earphone/Microphone with Switch ......... 115...
Page 118: Multi Access
<Multi Access> Receiving a voice call during i-mode communication Multi Access If you receive a voice call while you are using i-mode, receiving or sending i-mode mail, the voice call reception screen appears and Multi Access is a function that enables you to make voice calls, you can answer the call without ending the i-mode session. perform packet communication and use SMS at the same time. ● You cannot answer videophone calls during i-mode session. This enables you to receive SMS messages during a voice call or answer a voice call during the i-mode session. Multi access combination patterns The voice call reception screen appears and you can answer The table shows the possible main combination patterns for the the call. multi access: To end the call Newly established Videophone communi- Voice calls i-mode mail The call ends and the i-mode screen reappears. calls cation Current Making Receiving Making Receiving Sending Receiving Sending Receiving communication Receiving a voice/videophone call during SMS operation ※1...
Page 119: Using Schedule Function
<Schedule> Function menu (Schedule list screen) Using Schedule Function ● While the Schedule list screen is displayed, press [Left] to display the function menu. Setting a schedule sounds the alarm tone at the specified date Item Description and time and displays the alarm message to notify you of the schedule. Stored schedules can be quickly checked on the Details Displays the details of the highlighted event.
Page 120: Setting The Alarm Clock
Item Description <Alarm clock> Setting the Alarm Clock Repeat Sets the repetition of scheduled event. 1 time Sets the event only for the specified ● You can store up to 3 alarm settings. date and time. On the standby screen Daily Sets the event to repeat every day on the specified time. [Left] (Tools) "Alarm clock" Select day Sets the event to repeat every week Select an item to set on the same day (Sun to Sat) and time. Set the following items ・ From the date you set, the event is repeated every week on the same Item Description day and time. Time Sets the time when the alarm will sound. Select date Sets the event to repeat every month When "Time format" is set to "12 h" on the same date and time.
Page 121: Using Calculator Function
<Calculator> "<Not recorded>" Using Calculator Function ■ To check the details of the currently stored text memo Select an item to check in details The FOMA terminal performs the four basic arithmetic operations ･ You can edit the text memo by pressing [Left] while (+ (addition), − (subtraction), × (multiplication), ÷ (division)). viewing. ● Up to 9-digit number can be displayed excluding −（minus) and decimal places. Compose a text memo ● The result number consisting of more than 9 figures is displayed as "E". ■ Important On the standby screen It is recommended to back up the text memos by taking notes. You can also save the data to your PC by using the [Left] (Tools) "Calculator" Data Transfer Software (p.157) and the FOMA USB Cable (optional).
Page 122: Using Common Phrases Function
<Common phrases> <Own dictionary> Using Common Phrases Function Storing Frequently Used Words You can retrieve from the Text entry (edit) screen if you store You can recall those words by entering and converting the reading common phrases in advance. Common phrases are stored in 3 in the Text entry (edit) screen if you store frequently used words in folders. Folder 1 and 2 contain 9 preset fixed common phrases an own dictionary. respectively. You can store phrases created by yourself up to 9 in ●...
Page 123: Using An Earphone/Microphone With Switch
Note <Earphone/microphone with switch> Using an Earphone/Microphone with Switch If you set "Automatic answer" to "ON", you can accept an incoming call automatically without having to press the You can receive a call using a switch of flat-plug earphone/ switch on the earphone/microphone with switch→p.52 microphone with switch. When you have a call, the ring tone sounds for around 20 ●...
Page 125: Network Services
Network Services Available Network Services ............... 118 Voice Mail Service ................<Voice mail> Activating the Voice Mail service ............... 118 Playing recorded messages ................. 119 Checking for recorded messages ............... 119 Changing your Voice Mail service settings using audio guidance..119 Call Waiting ..................<Call waiting> Activating Call Waiting ................... 119 Putting the current call on hold to answer a newly received call ... 119 Ending the current call to answer a newly received call ......120 Putting the current call on hold to make a new call to somone else ..120 Call Forwarding Service ............ <Call forwarding> Activating Call Forwarding service ..............120 Forwarding a call to Voice Mail service center when the forwarding number is busy..121 Bar Nuisance Calls Service ........
Page 126: Available Network Services
NOTE Available Network Services "Deactivate" is not for unsubscribing the services such as Voice Mail, Call Forwading, etc. Your FOMA terminal provides you with access to various DoCoMo network services. <Voice mail> You can use services either from the menus or the dial control Voice Mail Service (entering number) of your FOMA terminal. In this manual, how to use the following services from the menus If you receive a voice call when the FOMA terminal is out of service is described. or turned off, this service sends an answer message to the caller and stores the caller's message on your behalf. Service Sub- Usage Description ● 20 messages of up to three minutes each can be recorded. name scription ●...
Page 127: Call Waiting
Playing recorded messages <Call waiting> Call Waiting On the standby screen [Left] (Service) The Call Waiting enables you to answer a voice call newly received "Voice Mail" while you are talking on another voice call. You can also use this "Play messages" "YES" service to put your current voice call on hold while you make a voice call to someone else. The FOMA terminal calls the Voice Mail service center. Then play your recorded messages by following the audio Activating Call Waiting instructions. On the standby screen [Left] (Service) Checking for recorded messages "Call waiting" On the standby screen [Left] (Service) "Activate"...
Page 128: Call Forwarding Service
<Call forwarding> Function menu (switching calls screen) Call Forwarding Service ● While the Switching calls screen is displayed, select [Left] to display the function menu. If you receive a voice or videophone call when the FOMA terminal Item Description is out of service or turned off, the Call Forwarding service forwards the call to a previously registered forwarding number. Switch Switches between the current call and the call on ● You can register only one forwarding number. hold. Activating Call Forwarding service End current Ends the current call, and returns to the call on call hold. On the standby screen [Left] (Service) End held call Ends the call on hold. "Call forwarding" Mute/ Mutes your voice. Resume "Activate" Refer Select the phonebook operation of the current call ■ To deactivate the Call Forwarding service phonebook from "Add to phonebook" or "Search phonebook"...
Page 129: Bar Nuisance Calls Service
<Additional service> Forwarding a call to Voice Mail service center when the forwarding number is busy Adding and Using Services The forwarding number must subscribe to the Voice Mail serv - When DoCoMo provides new and additional network services, this ice and set "Activate". function allows you to add the new services on your FOMA terminal. On the standby screen [Left] (Service) ● You can add up to 10 new network services. "Call forwarding" ● You can also add a part of the dial control (entering number). "At fwd party busy" "YES" Adding a new service When a new network service is provided, you will be notified of the <Bar nuisance call> "number" and "service code" that you need in order to use the new Bar Nuisance Calls Service service. You can add the new services using the number or code. The Bar Nuisance Calls service enables you to register specific On ...
Page 130: Service Dialing No
Using the newly added service <Service dialing No.> Service Dialing No. On the standby screen [Left] (Service) This function provides a quick and simple way to contact the "Additional service" DoCoMo general help desk and service counter for information on "Additional service" faults, etc. Select a service On the standby screen [Left] (Service) "Service dialing No." Adding response message Select any item When using your "USSD (service code)" to access an added service, you can store response messages for commands posted from the network.
Page 131: Data Communication
Data Communication Data Communication Available for the FOMA......124 Operational environment ..................125 Flow Chart for completing the data communication setup ....... 126...
Page 132: Data Communication Available For The Foma
Data Communication Available FOMA for the FOMA network Base station FOMA packet Packet communication communication You can connect the FOMA terminal to a PC and perform packet compatible access point (mopera U, mopera, data communication. To use the function, refer to the "Manual for Internet service provider) Data Communication" PDF file on the bundled "FOMA N600i CD- ROM". FOMA terminal ● Packet communication FOMA USB Cable Corporate LAN Packet communication is charged according to the amount of data (optional) sent and received, regardless of the time it takes or the distance. The communication charge can become very expensive when large files are sent and received. It is possible to access a corporate LAN connected to the FOMA network and exchange data.
Page 133 ● Notice before using NOTE Internet service provider fees You may download the "FOMA N600i communication setting You may need to pay user fees to an Internet service provider file" (drivers) from the DoCoMo website and install it to use the Internet. These fees must be paid directly to the ● Required devices service provider in addition to the FOMA service fees. Contact your Internet service provider for details. The following hardware and software, in addition to the FOMA DoCoMo Internet service "mopera U" or "mopera" is available. terminal and PC, are required: "mopera ...
Page 134 Flow chart for completing the data communication setup For the details of the setup, refer to the "Manual for Data Communication" PDF file on "FOMA N600i CD-ROM" that comes with the FOMA N600i. Connect the PC with the FOMA terminal using the USB cable. Install the N600i communication setting ﬁle (drivers) Check the COM port. Set up the APN. Set up dial-up network. Dial-up to connect. ※： To use the Internet connecting the FOMA terminal and a PC, "mopera U" (you need to subscribed to) is useful, which supports broadband connection, international roaming, etc.
Page 135: Entering Text
Entering Text Text Entry ....................128 Text entry (edit) screen ..................128 Changing the input mode ..................128 Entering Text ................... 128 Switching between upper case and lower case ..........129 Deleting text....................... 129 Using Predictive Conversion ............. 130...
Page 136: Text Entry
Changing the input mode Text Entry The FOMA terminal has the Kanji/hiragana, Kana, alphabetic, and numeric input mode. You can enter text on the FOMA terminal for various functions ● When you can change the input mode, " " is displayed. such as composing mail, adding information to phonebook, etc. Press in the text entry screen Text entry (edit) screen The input mode changes to the next mode each time you press in the following sequence: "Alphabetic (full-pitch/ half-pitch)"→ "Numeric (full-pitch/half-pitch)"→"Kanji/hiragana"...
Page 137 Go on to Step 6. ■ If [Right] is pressed when there is no character in the cursor location The character to the left of the cursor is deleted. A list of kanji candidates appears. Hiragana, katakana, and ■ If you hold down [Right] for 1 second or longer alphabet are included in the conversion candidates. All the text after the cursor is deleted. Select "時 " ■ If you hold down [Right] for 1 second or longer when "時" is entered. there are no characters after the cursor All the text is deleted. NOTE If you press [Check] before confirming the text, the text Function menu (Text entry screen) changes ...
Page 138: Using Predictive Conversion
Item Description Item Description Deletes the selected range of the characters and Quote own Quotes the text from Own number. stores in the FOMA terminal. number Selects the item to quote To cut a part of the text Prediction ON/ Specifies whether or not to use the predictive Move the cursor to the beginning of the text Prediction OFF conversion function. Move the cursor to the end of the text To cut all the text [Left] Using Predictive Conversion ・ Up to 2,048 bytes can be cut. ・ The copied or cut text is stored in the FOMA If "Prediction" is set to "ON", you can enter the text using the terminal until the FOMA terminal is turned off.
Page 139: Overseas Use
Overseas Use International Roaming Service ............132 International services available for this FOMA terminal ......132 Switching network ....................132 Country codes of major destinations ..............133 Checkpoints before Overseas Use ..........133 Preparation before leaving ..................133 Using the FOMA terminal at the destination ..........135 Setting after returning to Japan ................. 136 Making/Receiving a Call at the Destination ........ 136 Making a call....................... 136 Receiving a call......................136 Settings Related to Overseas Use..........137 Setting the network search method..............137 Searching for available network operators ............137 Setting priorities to network operators ............137 Setting the NW connection switch method............
Page 140: International Roaming Service
● The available network services and functions differ depending on the network operator you connect to. International Roaming Service ● For details on the network services available while roaming internationally, refer to " 国際サービスご利用ガイド". International roaming service (WORLD WING) is a service provided Also, on DoCoMo website you can see the latest information on by DoCoMo to FOMA users, in which you can make calls and use the international service, and you can download the latest "国際 i-mode overseas via other network providers. サービスご利用ガイド". With FOMA N600i, you can use this international roaming service http://www.nttdocomo.co.jp/service/world/ by the usual phone number you use in Japan. Even overseas, voice call, videophone call, i-mode and SMS are available. Also, you can International services available for this FOMA terminal use convenient network services such as Voice Mail service and Call Forwarding service. Service Detail ● You do not need to subscribe to the WORLD WING to use the Voice call ・...
Page 141: Checkpoints Before Overseas Use
● When you move from the first destination to another Region Number Region Number When you move out of the service area of the network operator Singapore Vietnam you were connecting to, the FOMA terminal automatically searches for an available network again, then connects to Switzerland Peru another network operator. Sweden Belgium ● When you return to Japan Spain Hong Kong When you set "Network switch" to "Automatic" or "3G", the Thailand Macaw FOMA ...
Page 142 Region Region Using i-mode and i-mode mail Austria Philippines To use i-mode and i-mode mail services, you need to activate "International Settings" under "Options" of "iMenu" in advance. Netherlands Finland ● For details, refer to " 国際サービスご利用ガイド " and "i-mode Canada France Operation Guide". Korea Brazil 0021 Setting network services Columbia Belgium To use Voice Mail service and Call Forwarding service overseas, Singapore Hong Kong you need to set "remote operation setting" in advance.
Page 143 Region Region Network Japan Overseas Greece Belgium Services FOMA GPRS Singapore Poland Making/receiving voice call ○ ○ ○ ○ ※1 ※1 Switzerland Portugal Making/receiving videophone ○ ○ × × call Sweden Hong Kong Using i-mode ○ ○ ○ × Spain Macaw ※ 2 ※2 Receiving MessageR/F ○...
Page 144: Making/Receiving A Call At The Destination
● Other party's phone number not notified Making a local call at the destination ・ Even if the other party notifies the caller ID, the other party's phone number will not appear if the network or operator does Dial the other party's phone number starting not supply the information. from the area code Setting after returning to Japan The local call is made. When you set "Network switch" to "Automatic" or "3G", the FOMA ■ To make an international videophone call terminal automatically connects to the FOMA network after being switched on (It is recommended to set to "3G"). If you had the setting to "Automatic" while overseas, turn the FOMA terminal off and then turn it back on. NOTE If the other party is a "WORLD WING" user, make an If you cannot connect to FOMA network international ...
Page 145: Settings Related To Overseas Use
● When the other party call you from outside Japan On the standby screen [Left] (Settings) Whether your destination is Japan or overseas, the other party "Connection setting" must dial the international access number + "81" (country code "Network re-search" of Japan) International access number - 81 - 90 (or 80) - XXXX- XXXX The FOMA terminal searches within the connected network, and available network operators appear as a list. Select a network operator to connect to Settings Related to Overseas Use NOTE You can set the settings related to overseas use, such as how to search for operators in the network and priority setting among the If you select a network operator from the search result list after a network search, "NW search mode" will be set to network operators.
Page 146: Using Network Services Overseas
Displaying network operator name while roaming Item Description You can choose whether or not to display the name of the currently UPLMN Registers a network operator which is not listed connected network operator while international roaming. manual in the FOMA terminal to the priority network list. Enter the net - Enter the country code (MCC) On the standby screen [Left] (Settings) work number (MNC) "Connection setting" UPLMN by list Selects a network operator to be listed in the PLMN list from the network operator list regis - "Operator name disp" "ON"/"OFF" tered in the FOMA terminal. Registers the currently connected network oper - Add current ator to the PLMN list. Using Network Services Overseas Setting the NW connection switch method You can use some of the network services overseas such as Voice Mail service and Call Forwarding service. On the standby screen [Left] (Settings) ● You need to subscribe to Voice Mail service and/or Call "Connection setting"...
Page 147 Operating Voice Mail service overseas To operate the Voice Mail functions overseas, dial the following numbers: Dial these numbers Start Voice Mail "+"( One second or longer)-81-90310- service 14110- Stop Voice Mail "＋" ( One second or longer) -81-90310- service 14100- Replaying Voice "＋" ( One second or longer) -81-90310- Mail messages 14170- Change Voice Mail "＋" ( One second or longer) -81-90310- service settings 14160- Operating Call Forwarding service overseas To operate the Call Forwarding functions overseas, dial the following numbers. Dial these numbers Start call " ＋" ( One second or longer)-81-90310- forwarding service 14210- Stop call ...
Page 149: Appendix
Appendix Menu Function List................. 142 Character Allocation to Keypad ............148 Symbols and Special Characters List ..........149 Pictographs Symbols List ..............150 Smiley Face Symbols List ..............151 Kuten Code List ..................152 Common Phrases List ................156 Services Available for the FOMA terminal ........157 Options and Accessories ..............157 Data Link Software ................157 Malfunction Checklist ................158 If Any Error Message Appears ............162 Warranty and After-Sales Service........... 163 Warranty ........................163 After-sales service ....................
Page 150: Menu Function List
Menu Function List indicates that the item returns to the default setting at the time of purchase by "Reset" (p.53). Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page Mail Inbox − Outbox − Draft − Compose message − Check new message − Rcv. option setting SMS center: NTT DoCoMo Select storage: Phone Mail settings Receive settings Refer to "Setting Up the Mail Functions" (p.90). Edit settings Display settings Other settings − i-mode iMenu − Bookmark − Screen memo − Last URL −...
Page 151 Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page i-mode Go to location − Message − Check new message − i-mode settings Home URL Refer to "Specifying Your i-mode Settings" (p.76). Display settings Certificate Other settings i-αppli Software list − α Display light Depend on system α Vibrator Depend on system Auto start failure − Settings Incoming/Volume Volume Ring volume: Level 2 Message ring volume: Level 2 Voice volume: Level 2 Keypad volume: Level 2...
Page 152 Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page Settings Clock Clock setting − Date setting − Time format Clock display Manner Manner mode set Manner mode mode Original Setting for Original 1/2 Volume Ring volume: Level 0 Keypad volume: Level 0 Voice volume: Level 2 Mail ring volume: Level 0 Alarm volume: Level 0 Ring tone Same as the "Ring tone" for normal mode, when manner mode is not set Vibrator: Pattern1 Mic sensitive: Up LVA tone: OFF Display Wake-up display Pre-installed image Stand-by display Calendar: ON My picture: Illuminations Color pattern Gray...
Page 153 Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page Settings Connection NW search mode Automatic setting Network re-search − PLMN setting − Network switch Operator name disp Host selection i-mode (FOMA card (UIM)) User setting: Not stored Video-phone Disp. set V-phone Other image Image quality Normal Color mode set Normal Camera img sending Send camera image Voice auto switch Other Automatic answer settings Side key guard Charge sound CHR input method Prediction: ON Illumination Illumination...
Page 154 Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page Data My picture Sort: Chronological ↑ List display: Picture list imotion Melody Sort: Chronological ↑ Memory info − Camera Photo mode Camera direction: Rear camera Select size: Mail(L)(176 × 144) Storage setting: Mail (S) White balance: Automatic Color mode set: Normal Brightness: 0 Zoom: × 1 Select frame: OFF Shutter sound: Shutter sound1 Movie mode Camera direction: Rear camera Select size: Large (176 × 144) File size setting: Restricted(Mail) Storage setting: Normal White balance: Automatic Brightness: 0...
Page 155 Main Menu No. See Sub item Branch item Default setting at the time of purchase item (Key operation) page Phonebook Add to phonebook − Search phonebook − Call rejection No. of phonebook − Group setting FOMA terminal (Phone):Group 0 to 19 FOMA card (UIM): 0 to 10 Call data Received calls − Redial − Own number − Tool Schedule − Alarm clock − Calculator − Text memo − Common phrases Common phrases: Initialize common phrases (only Folder 1 and 2) Folder name: Folder 1and 2 Own dictionary −...
Page 156: Character Allocation To Keypad
※ 1: You can enter the lower case " ワ" in full-pitch character input mode. Character Allocation to Keypad ※ 2: Pressing more than one second in "Upper case input mode" of "Kanji/hiragana input mode" switches mode to "Kuten code". Kanji/hiragana input mode Kana input mode ※ 3: In "Kanji/hiragana input mode" and "Kana input mode" , "゛" ぁぃぅぇぉ...
Page 157: Symbols And Special Characters List
Symbols and Special Characters List ■ Full-pitch Symbols 2 ■ Full-pitch Symbols 1 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ 、。 , ．・ : ; ? ! ゛゜ ′ Β...
Page 158: Pictographs Symbols List
■ Symbols in Japanese conversion You can enter symbols by entering and converting " きごう" to Pictographs Symbols List display the symbol candidates, and then selecting from the symbol candidates. You can also enter the name of a symbol in ■ List of Pictographs 1 hiragana as follows, and then convert the text into the desired symbol. Symbol name Symbol name (input Symbol (input Symbol characters) characters) あっと、＠さんかく △▲▽▼ あっとまーくしゃせん／＼いこーる＝しかく □■◇◆ えん￥たす＋...
Page 159: Smiley Face Symbols List
Smiley Face Symbols List If you input " かお" or "かおもじ " , or the meaning (input text) and convert, the candidates appear and you can select to input the symbols. ● If you input " かお ", candidates from "Smiley Face Symbols 1" and "Smiley Face Symbols 2" appear. ● If you input " かおもじ", candidates from "Smiley Face Symbols 1" appear. ● If you input the meaning (input text), corresponding "Smiley Face Symbols 1" appear. ■ Smiley Face Symbols 1 Meaning Meaning Meaning Smiley face symbols Smiley face symbols Smiley face symbols (input text) (input text) (input text) (Ha-ha!) (Zzzz...) (Sweat! Sweat!) (Ah ha!) (I’ m sleepy) (Koala) (Wait a minute!) (Thanks!)
Page 160: Kuten Code List
Kuten Code List <Guide to the kuten code table> First enter "First to third digits of the Kuten codes" and then enter "fourth digit of Kuten codes". ● Some kuten codes in the table here may look different from the actually-displayed ones. First to third First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of digits of Kuten codes...
Page 161 First to third First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of digits of Kuten codes Kuten codes Kuten codes...
Page 162 First to third First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of digits of Kuten codes Kuten codes Kuten codes...
Page 163 First to third First to third First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of digits of digits of Kuten codes Kuten codes Kuten codes...
Page 164: Common Phrases List
First to third First to third Fourth digit of Kuten codes Fourth digit of Kuten codes digits of digits of Kuten codes Kuten codes Common Phrases List 覈覊覓覘覡覩覦覬覯覲陝陟陦陲陬隍隘隕隗覺...
Page 165: Services Available For The Foma Terminal
Services Available for the FOMA terminal Options and Accessories By combining various options and accessories sold separately, the Available service Phone number FOMA terminal can support a wide range of applications to meet both your personal and professional needs. Note that some Collect call (Receiver pays for the call) (No area code) 106 products may not be available in some areas. For more information, Directory assistance for general phones and (No area code) 104 contact a DoCoMo service representative. DoCoMo mobile phones (pay) For details of options and accessories, see relevant User's Guide. (Unlisted phone numbers cannot be given) ※ 1 ※1 ・ Earphone/Microphone with Switch P001 /P002 ※1 Telegram (pay) 8:00 am to 10:00 pm (No area code) 115 ・ Stereo Earphone Set P001 ・ Flat-plug Earphone/Microphone with Switch P01/P02 Time (pay) (No area code) 117 ・...
Page 166: Malfunction Checklist
・ Is All lock set? liable, claimed by the third party. Moreover, you shall not make ・ Is the start time of Voice Mail or Call any claim against this company. Forwarding service set to "0"? Inquiries about Data Link Software ・ Is the Ring volume set to "Silent"? NEC (NEC NTT DoCoMo Terminals Marketing and Sales Division) I cannot hear the ・ Is "Mute seconds" of "Set ringing 0120-102-001 (Japanese only) ring tone time" set to longer time (e.g. 99 Business hours: Weekdays 9:00 am to 12 noon and 1:00 pm to 5:00 pm seconds)? Set "Mute seconds" to ...
Page 167 Refer Refer Problem Points to check Problem Points to check The mail ring ・ Is "Msg. notification" set? When The other party's ・ Did you change the "Volume" tone sounds but the number of the new Voice Mails voice is too loud setting? Change the setting until you no mail is increases while the FOMA terminal is during a call can hear the other party clearly. received out of service area or turned off, and The other party ・ Is the mouthpiece obstructed by then you come back into service area cannot hear your something? or turn on the FOMA terminal, the mail voice ring tone sound to notify you of ...
Page 168 Refer Refer Problem Points to check Problem Points to check I t t a k e s s o m e ・ The data checking may take time e.g. − i-mode, i-mode ・ Is "Host selection" set to "i-mode"? time for the if the phonebook is full of data. mail and i-αppli − ・ If you had started using the FOMA power to turn on cannot be terminal before you subscribed to after pressing ...
Page 169 ■ Overseas use Refer Problem Points to check Refer Problem Points to check The other party' s ・ Even if the other party notifies his/her − phone number is identity, in some network or operator " " appears on ・ Are you ourside the service area of − not notified the number may be specified as "Not the screen and international roaming service, or in an A different phone supported" call or a different phone i n t e r n a t i o n a l area where reception is weak? number is notified...
Page 170: If Any Error Message Appears
Refer Error Message Explanation and Solution If Any Error Message Appears "Enter correct ・ Appears when you need to enter the − ● Numbers enclosed in parentheses contained in i-mode error network security network security code for the messages are codes used to distinguish the errors sent from code" function but a wrong number was the i-mode Center.
Page 171: Warranty And After-Sales Service
・ Be sure to take the warranty card with you when having your FOMA terminal repaired. Even during the warranty period, a Warranty and After-Sales Service charge will be made for the repair if you cannot show the warranty card or if the malfunction or damage has resulted Warranty from improper use. ・ Even during the warranty period, a charge will be made for the ● Make sure that the warranty card is included with your FOMA repair if the malfunction has resulted from the use of devices terminal ...
Page 172 Memory dial (phonebook function) and ■ IMPORTANT downloaded information Do not attempt to adapt the FOMA terminal or its ● It is your responsibility to keep a separate record of all data accessories by yourself. stored on your FOMA terminal. NTT DoCoMo disclaims any ･ Doing so may cause fire, injury or malfunction. responsibility for alteration or loss of data. ･...
Page 173: Specific Absorption Rate (Sar) Of Mobile Phones
Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to Specific Absorption Rate (SAR) of Mobile Phones radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines Specific Absorption Rate (SAR) of Mobile Phones and establish permitted levels of RF energy for the general population.
Page 174 Declaration of Conformity Important Safety Information AIRCRAFT The product "FOMA N600i" is declared to conform with the essential Switch off your wireless device when boarding an aircraft or whenever you are requirements of European Union Directive 1999/5/EC Radio and Telecom- instructed to do so by airline staff.
Page 175: Index/Quick Manual
Index/Quick Manual Index ......................168 Quick Manual.................... 172...
Page 176: Index
Index Movie mode Earphone/microphone with switch Photo mode English Accessories Rear camera Adding bookmarks Zoom Fixed common phrases list Additional service Camera img sending FOMA card After service Certificate FOMA card phonebook Alarm clock Character allocation to keypad Inserting/removing All lock Charging Operational restriction function 23 Answer setting Check messages PIN codes Attached file set CHR input method FOMA card functional differences 24 Automatic answer Clear learned FOMA N600i CD-ROM Automatic play Clock FOMA USB cable Automatic redial Clock display Frame Automatic replay Color mode set Color pattern Go to location...
Page 177 Character size Disp. soft info Guide to the Title list Check new messages Downloading from Sites Operation during playback Check settings Network set Storage status Compose message Software info Movie mode Delete folder Trace info Select size Delete received mail Upgrade Multi Access Delete sent mail My picture Edit Kuten code list Edit folder name Filter Network re-search Forward Network Services Language Guide to the folder list screens 86 Network switch Last URL Guide to the mail detail screens 87 Notify Caller ID Guide to the mail list screens Notify caller ID Mail security Mail list display Notifying/withholding caller ID Mail settings Mail security NW search mode...
Page 178 Group setting Software key No. of phonebook Stand-by display Save image Search phonebook Symbols and special characters 149 Schedule Photo mode Screen memo Auto timer setting Certificate Text entry Continuous mode Delete Changing the input mode Select frame Display Delete Select size Edit title Predictive conversion Zoom Protect ON/OFF Text entry (edit) screen Pictographs symbols list Save Upper case and lower case PIN code Screen memo Text memo PIN lock Security code Time format PIN setting Change Turning FOMA terminal on/off PIN1 code entry Security codes PIN1/PIN2 code i-mode password PIN1/PIN2 code change...
Page 180: Quick Manual
Quick Manual ■ How to use the Quick Manual ● The Quick Manual describes the basic operations and displays of the FOMA terminal. The Quick Manual (Overseas Use) also describes the necessary settings and the basic operations for overseas use. ● You can tear it our of this manual and fold it for ease of use. ● Detach one page at a time so that you do not tear other pages. Take care not to hurt yourself. Cut along this line. F i r s p a g...
Page 181 Phonebook Phonebook Phonebook Phonebook Phonebook Phonebook Add to Phonebook 1. → "Add to phonebook" →"Phone" or "UIM" 2. Enter name→Check the reading and edit if required 3. Select items and enter or select items ・Phone number ・E-mail address ※1 ・Group (0 to 19) ※２・Image ※2 ・Call rejection("ON/"OFF") ※3 ・Memory number (001 to 500) ●For inquiries ※1: For FOMA card (UIM), Group 0 to 10 ※2: Cannot register for FOMA card (UIM) ※3: For FOMA card (UIM), number 001 to 050 4. [Left] to save and ﬁnish ■ Add data from the received call/redial record 1. to display the received call/ to display the redial list → Select the number to add to phonebook 2. [Left]→"Add to phonebook" Phonebook Search Phonebook Switch Upper/Lower case Text entry and Full/Half pitch 1. →"Phonebook search"→ Select the search method 2. Search by specifying the criteria 1. While on text edit screen, [Left] ※ ・"Reading search": Enter a part of the reading →...
Page 182 ■ Operation while in videophone call Camera Shoot Movie ：Switch to hands-free/Cancel 1. [Left]→ (Camera)→"Movie mode" [Right]: Switch front/rear camera 2. Display the subject→ or ［］to start shooting Mail Send/Receive Mail 3. or ［］to stop shooting→ → ■ Send mail Camera Make/Receive a videophone call 1. [Right]→"Compose message" ■ Make a videophone call 2. Input address 1. Enter the phone number→ ・Select the To ﬁeld, enter the mail address or [Left], 2. If the other party's phone has videophone function, select "Address menu"→"Quote phonebook" to select the address from phonebook→ talk by videophone→After talking, 3. Input subject/message ■ Receive a videophone call ・Select the Subject/Message ﬁeld, input text→ 1. When there is an incoming call, 4. [Left]→"Send" To answer using substitutive image, ■ Display a received mail 2. After talking, 1. [Right]→"Inbox"→Select a folder→Select the mail to display WORLD CALL (DoCoMo's international call service) Voice Mail service Network services Dial 009130-010- country code - area code - phone number ■ Check if there is new Voice Mail message and 1. [Left]→ (Service)→"Check messages"...
Page 183 Before Using the Phone Overseas use ●When ﬁrst using the phone after moving from Japan to another country, switch the phone on again. (Overseas Use) ●The following table shows the available service diﬀerences between the networks: For inquiries about loss, Make/ Make/ i-mode Receive Send/ Packet Send/ For malfunctions receive theft and total charge receive communi- receive Message receive video- overseas voice cation for used overseas i-mode phone call PC, etc. mail call (24 hours) ※2 (24 hours) ○ ○ ○ ○...
Page 184 Receive a Call Overseas use Network Settings Overseas use ■ Receive a Call ■ Set network switch method [Voice call] Setting at time of purchase: "3G" When there is an incoming call, or 1. [Left]→ (Settings)→"Connection setting"→ [Videophone call] "Network switch" To answer using camera image, 2. Select the item to set To answer using substitutive image, Item Overseas In Japan ■ Other party's procedure to call you Connects to 3G network Connects to FOMA Auto- [From Japan] matic first network 090-XXXX-XXXX or 080-XXXX-XXXX Connects only to 3G Connects to FOMA [From countries other than Japan] network network International access number -81(Japanese country code) Connects only to Does not connect to -90-XXXX-XXXX GSM/GPRS any network or -80-XXXX-XXXX ■ Set network search mode Overseas use Country Codes of Major Destinations Setting at time of purchase: "Automatic"...
Page 185 Using your FOMA Terminal Politely When using your FOMA terminal in public, do not forget to consider the feelings of people around you. Turn off your FOMA terminal when you are: ■ In a place where it is prohibited to use a mobile phone It is prohibited to use a mobile phone in some places. Turn off your FOMA terminal in: ・An airplane ・A hospital ※ Turn off your FOMA terminal in a lobby or waiting room as well as in a hospital ward in case that the electronic medical equipment may be in use nearby. ■ Driving Using the FOMA terminal prevents you from driving safely. ※ Stop the car in a safe place before using the phone, or use the Public mode. ■ In a crowded place such as rush-hour train, where somebody nearby may be using an implantable cardiac pacemaker or implantable cardioverter-defibrillator Radio waves may affect the operation of implantable cardiac pacemakers or implantable cardioverter-defibrillators if used in close proximity. ■ In a public place such as theater, cinema, or museum Using the FOMA terminal in a public place, where you need to be quiet, annoys people around you. Mind where you use your FOMA terminal and how loud your voice or the ring tone is ■ If you use your FOMA terminal in a quiet place such as restaurant or hotel lobby, mind how loud your voice is, etc. ■...
Page 187 Manual for Data Communication This manual includes the required information for data communication using FOMA N600i and how to install "N600i communication setting file" and "FOMA PC setting software" in the CD-ROM.
Page 188 Table of contents About Data Communication Available for the FOMA Terminal ..Before Using ....................Checking the Procedure ................. Setting the PC ................... About the FOMA PC Setting Software ..........How to Set Various Settings ............... Executing Set Data Communication ..........W-TCP Settings..................Access Point Name (APN) Settings ..........Setting up Dial-up Network ..............Setting up Dial-up ..................AT Command List ..................Description of Windows ® ® ® ･ Windows 98 stands for Microsoft Windows 98 operating system. ® ® ® ･ Windows 98SE stands for Microsoft Windows 98 Second Edition operating system. ®...
Page 189: About Data Communication Available For The Foma Terminal
"mopera" is a free service for which you do not need to subscribe. About Data Communication Available for the FOMA Terminal Before Using You can connect your FOMA terminal to Operational environment a PC and perform packet communication. Packet communication The PC operation environment to use Data is received at 384kbps max and data communication is shown below: sent at 64kbps max. Packet communica- tion is charged according to the amount of data sent and received, regardless of ・...
Page 190: Checking The Procedure
Connecting the devices Checking the Procedure The following procedure explains how to connect the FOMA USB Cable (optional): In data communication, the connection is made through a dial-up connection with Internet service providers or LANs that support FOMA packet communication. FOMA terminal USB terminal ■ About the "FOMA N600i CD-ROM" provided The CD-ROM contains the "N600i communi- cation setting file (drivers)" and the "FOMA PC setting software". The N600i communication setting file is software ...
Page 191: Setting The Pc
Turn on the FOMA terminal, and Disconnecting the devices then connect the FOMA USB The following procedure explains how to Cable connected to the PC to disconnect the FOMA USB Cable (optional) your FOMA terminal For Windows 98/Me The " 新しいハードウェアの追加ウィザード " (Add new hardware wizard) screen Release button appears. For Windows 2000/XP The " 新しいハードウェアの検出ウィザード " (Find new hardware wizard) screen Release button appears.
Page 192 ● For Windows 2000 Select "使用中のデバイスに最適なドライバを検索する（推奨）" (Search Connect the FOMA USB Cable for the driver suitable for the to the FOMA terminal device in use (recommended)), Attaching the FOMA USB Cable (optional) to check " 検索場所の指定 "(Specify the FOMA terminal in Step 5 of "Connecting the FOMA terminal to PC" (p.4) displays the follow- the search location) and click "参 ing dialog box: 照...
Page 193 ● For Windows XP When the message "新しいハードウェアの検索ウィザードの完了" (The find Connect the FOMA USB Cable new hardware wizard is finished) to the FOMA terminal appears, click "完了 " (Finish) Attaching the FOMA USB Cable (optional) to the FOMA terminal in Step 3 of Install other drivers "Connecting the FOMA terminal to PC" (p.4) displays the following dialog box: Follow ...
Page 194 Click each device to check the Uninstalling the N600i installed driver name communication setting file Check that all the driver names are If necessary (e.g. when Windows has displayed under "ポート（COMとLPT） " (Ports been upgraded), uninstall the drivers as (COM & LPT)), " ユニバーサルシリアルバス follows. ...
Page 195: About The Foma Pc Setting Software
Installing the FOMA PC About the FOMA PC Setting Software Setting Software FOMA PC setting software allows you to Check operating environment prior to install- set up easily as follows: ing the FOMA PC setting software. →p.2 When installing the "FOMA PC Setting You can also set up packet communica- Software" on Windows 2000/Windows tion without using the FOMA PC setting XP, be sure to log on as Administrator. If software.→ p.18 you attempt to install the file with another account, an error occurs. Contact your PC s ...
Page 196 Click " 次へ " (Next) Notes on installation of the FOMA PC setting software Select whether or not you want "W-TCP settings" to reside in the Task Tray. This is a function to set up/cancel ＜If the Previous W-TCP setting soft- optimization of "W-TCP communication", ware is installed ＞ and it is recommended that you make it reside in the Task Tray.
Page 197: How To Set Various Settings
Click "かんたん設定 " (Easy settings) How to Set Various Settings Select " パケット通信 " (Packet The FOMA terminal needs to be con- communication) and click " 次へ" nected to your PC via FOMA USB Cable (Next) (optional), and the Communication set- ting file needs to be properly recognized Select "[mopera U] への接続 " on the device of your PC. (mopera U access) or "[mopera] If the FOMA terminal is recognized as the number ...
Page 198 Specify a user name and Easy settings: "Use other provid- password and click " 次へ " (Next) ers to set packet communication" You can leave user name and password Click "かんたん設定" (Easy settings) blank for mopera U or mopera connection. （Windows 2000, Windows XP） Select " パケット通信 " (Packet communication) and click " 次へ" (Next) Select " その他 " (Other) and click " 次へ " (Next) Click "OK" The access point (APN) settings will be Select ...
Page 199 Click " 接続先（APN）設定" (Specify Specify a user name and the access point (APN)) password and click "次へ" (Next) At the time of purchase, the mopera Select the user for Windows 2000/Win- access point name (APN) "mopera.ne.jp" is dows XP. Selecting すべてのユーザー " (All specified for cid1, and the mopera U Users) sets the connection for all users on access point name (APN) "mopera.net" is Windows.
Page 200: Executing Set Data Communication
Check that the line is connected properly, and click "OK" Executing Set Data Communication Dialing up usually displays the following When executing data communication via screen: FOMA USB Cable (optional), dialing from This message does not appear if it has been set to be disabled. the dial-up icon is only valid for the FOMA terminal used when the icon is created. To connect to another FOMA terminal, the communication setting file must be installed again.
Page 201 When this happens Uninstalling the FOMA PC Setting Software Check the following if you cannot connect to the network or dial-up successfully: This section describes uninstallation Problem Points to check instructions for FOMA PC setting software. When uninstalling the "FOMA PC Setting "FOMA ・ Check if your PC is equipped with the N600i" is environment required (p.2). Software" on Windows 2000/Windows XP, ・ Check if the N600i communication be sure to log on as Administrator. If you recognized setting file has been correctly ...
Page 202: W-Tcp Settings
Start " アプリケーションの追加と削 NOTE 除 " (Add/remove programs) on Cancel "W-TCP 最適化 " (Optimize W-TCP) Windows The following screen appears if "W-TCP 最適化" (Optimize W-TCP) is done. To uninstall, usually For Windows 98/Windows Me/Windows click " はい" (Yes) to cancel the optimization. 2000 Select " スタート " (Start) → " 設定 " (Settings) → "コントロールパネル" (Control Panel) → Click the icon of " アプリケーションの追加と削除 " (Add/remove programs) " アプリケーションの追加と削除のプロパティ " (Add/remove ...
Page 203 ＜For Windows 98/Windows Me/Win- Operate as follows dows 2000 ＞ Exit all the running programs and follow the Start the program screen instructions to restart the Windows. The optimized system settings become valid (1) To operate from "FOMA PC 設定ソフト " after the restart. (FOMA PC setting software) (1) If the system settings have not been Click "W-TCP 設定 " (W-TCP Settings) of optimized "...
Page 204: Access Point Name (Apn) Settings
Set up the access point (APN) Access Point Name (APN) Settings Set up the access point (APN) for packet communication. You can set up to 16 destinations by registering them into cid (Registration Numbers) 1 through 16. The APN setting (the access point for FOMA packet communication) is stored Adding/Editing/Deleting the access on the FOMA terminal. If you connect to point (APN) another FOMA terminal, the APN must be ･...
Page 205: Setting Up Dial-Up Network
Dial-up creating function Setting APN is similar to registering a phonebook for packet communication Select the added/edited access point (APN) on from PC. Assign registration numbers the " 接続先（APN）設定" (Set up access point (cid) 1 through 16 to register, which are (APN)) screen and click " ダイヤルアップ作成" used as a part of the access point (Create dial-up).
Page 206 ● To confirm COM port on ● To confirm the COM port on Windows 98/Me Windows 2000 Select "スタート" (Start) → "設定" Select " スタート " (Start) → " 設定" (Settings) → " コントロールパネル " (Settings) → " コントロールパネル" (Control Panel) (Control Panel) Open "モデム" (Modem) from Con- Open " 電話とモデムのオプション" trol Panel (Telephone and modem options) If the "モデム" (Modem) icon does not appear from Control Panel in Control Panel, click " すべてのコントロールパネルのオプションを表示する " (Display all Control Panel options). Confirm that "FOMA N600i" has been set and click the " 検出結果 " If the "所在地情報" (Address infor- (Diagnostics) tab mation screen) appears, enter "...
Page 207 ● To confirm the COM port on Setting up the access point (APN) Windows XP cid1: mopera.ne.jp Select " スタート " (Start) → " コン Default setting cid3: mopera.net cid2, 4 to 16: not set トロールパネル " (Control Panel) To make the settings, you need the communication software for entering AT commands. This section describes how to set it up using "Hyper terminal" that comes with Windows. Set up the access point (APN) for packet communication. You can set up to 16 access ...
Page 208 Enter any name in the " 名前 " Enter the access point (APN) (Name) column and click "OK" and press "sample" is entered here as an example. Enter in the format of AT+CGDCONT=＜ cid ＞ , "PPP", "APN" ＜cid＞:Enter any number from 2, 4 to 16 If cid has been already set, the setting will be overwritten. "PPP" :Enter "PPP". "APN":Enclose the access point (APN) in " " (double quota- tion mark). "OK" means that setting the access point Select "FOMA N600i" from "...
Page 209: Setting Up Dial-Up
Double-click " 新しい接続" (New connection) in the Dial-up Network Setting up Dial-up This section takes accessing mopera by packet communication for example. Enter "＊99＊＊＊3#" as the number of access point for mopera U or "＊99＊＊＊1#" for mopera. Specifying Caller ID Notification You can set whether or not to notify the Enter any name in the "接続名" (Connection other person of your caller ID (whether or Name) and click "次へ" (Next) not ...
Page 210 Click the " セキュリティ " (Secu- Confirm "電話番号" (Phone number) rity) tab to check the settings and "接続方法" (Connection method) and click "OK" on the " 全般" (General) tab Uncheck " 市外局番とダイヤルのプロパティを使 You can connect either to mopera U or う " (Use the Properties of the Area Code mopera with user name and password col- and Dial) ...
Page 211 Enter the access point number When the "電話とモデムのオプション" in the " 電話番号" (Phone Number) (Telephone and Modem options) column, and click " 詳細設定" screen appears, click "OK" (Advanced settings) When the " ネットワークの接続ウィ Uncheck "市外局番とダイヤル情報を使う" (Use Area Code and Dial information). ザード " (Network Connection Wizard) screen appears, click " 次へ " (Next) Select " インターネットにダイヤルアップ接続する " (Dial-up to the Internet), and click "...
Page 212 When the screen returns to Step Confirm the settings on the " 全般 "(General) tab 10, click "次へ" (Next) If two or more modems are connected to Click " 次へ " (Next) the PC, confirm that only " モデム − FOMA N600i" (Modem-FOMA N600i) is checked You ...
Page 213 Enter any name in the "ISP 名" Setting up dial-up on (ISP Name) and click " 次へ" Windows XP (Next) Select " スタート " (Start) → " すべてのプログラム " (All programs) → " アクセサリ" (Accessories) → " 通信 " (Communication) → " 新しい接続ウィザード " (New connection wizard) When the " 新しい接続ウィザード " Enter ...
Page 214 Select "スタート" (Start) → "すべての Click the " ネットワーク " (Net- プログラム" (All programs) → " アクセ work) tab and make the settings サリ" (Accessories) → " 通信" (Com- Select "PPP: Windows 95/98/NT4/2000, Internet" in the " 呼び出すダイヤルアップサーバーの munication) → " ネットワーク接続" 種類" (Dial-up server type) (Network connection) Select " インターネットプロトコル（TCP/IP）" (Internet Protocol (TCP/IP)) under " この接続は次の項目を使用します " (Use the following Select ...
Page 215 ＜The Connecting screen appears＞ Dialing up to connect The user name and password are confirmed to be ready to log on. This section describes how to make a dial-up connection for packet communi- cation by using the dial-up setting. During packet communication, an icon may be ＜ Connection completed ＞ displayed on the FOMA terminal screen You can use e-mail or run the browser depending the communication status.
Page 216 Confirm the settings and click When this happens " ダイヤル " (Dial) Check the following if you cannot connect to the network or dial-up successfully: The following screen shows an example for mopera connection. You can connect Problem Points to check either to mopera U or mopera with user "FOMA ・ Check if your PC is equipped with name and password columns blank. the environment required (p.2). N600i" is ・ Check if the N600i communication not setting file has been correctly recognized ...
Page 217: At Command List
AT Command List AT commands available on FOMA terminal ● The following abbreviations are used in the AT command list: [&F]:The settings are initialized by AT&F command. Modem port command list The following commands can be used for "FOMA N600i"（モデム） (modem): AT command Outline Parameter/description Execution examples − Adding a command in this table after this command controls the modem function of the FOMA terminal. ※OK is returned even when only AT is entered. AT&Cn Selects the operating AT&C1 n =0: CD is always ON condition of the circuit n =1: CD changes by the carrier of the CD signal to DTE. other party's modem (initial [&F] ...
Page 218 AT command Outline Parameter/description Execution examples AT+CGEQMIN Registers a criterion AT+CGEQMIN=[Parameter](p.36) p.36 to be used to decide AT+CGEQMIN=? whether or not to : Displays a list of values that can be accept the (quality of service) AT+CGEQMIN? sent from the net- : Displays the current setting work when packet communica- tion is established. AT+CGEQREQ Sets the QoS (quality AT+CGEQREQ=[Parameter](p.36) p.36 of service) to request AT+CGEQREQ=?
Page 219 AT command Outline Parameter/description Execution examples AT+CPIN Enters the PIN code Format ： AT+CPIN="<pin>","<newpin>" (+CPIN: READY on the FOMA termi- This is a command to enter the returned when +CPIN? nal. PIN1, PIN2 or PUK code for the is entered) FOMA terminal, depending on AT+CPIN="1234" the status of the result code ERROR returned ...
Page 220 AT command Outline Parameter/description Execution examples AT+CUSD Sends USSD signal Format：AT+CUSD=<n＞,"<str>",<dcs> AT+CUSD=0, "xxxxxxxxx" to check the change and details of the <n> 0： Not send mid result＜m ＞ network settings. [<str>, <dcs>] (initial value) AT+CUSD=1,"＊148＊1＊ 1： Sends mid result＜m ＞[<str>, 0000#",0 <dcs>] +CUSD:0,＊148＊7#",0 Mid result <m >0： The settings com- pleted. 1： The network requires AT+CUSD? the info. +CUSD:0 <str> Only 0-9, # and * are permitted ...
Page 221 AT command Outline Parameter/description Execution examples ATIn Displays the ID code. n =0 ： Displays "NTT DoCoMo" AATI0 n =1 ： Displays the product name NTT DoCoMo (same as +GMM) OK n =2 ： Displays the version of the ATI1 FOMA terminal (same FOMA N600i +GMR) n =3 ： Displays each element of the ACMP signal. n =4 ：...
Page 222 AT command Outline Parameter/description Execution examples ATVn Sets all the result n =0 ： Returns the result code in ATV1 codes to be displayed numeric value in numeric characters n =1 ： Returns the result code in [&F] or in alphabets. alphabets (initial value) ATXn Specifies whether to n =0 ： No dial tone detected, no busy ATX1 display the speed tone ...
Page 223 ● Supplementary explanation ※： <cid> is a number for managing the access point name (APN) to register on of AT command the FOMA terminal for a packet communi- cation. A number from 1 to 16 is ■ Non-operating commands available on the FOMA terminal. The following commands do not generate "mopera.ne.jp" and "mopera.net" are regis- errors but will not function as a command: tered as default to cid1 and cid3, respectively. ...
Page 224 ・Operation performed when the parameter ･ &E1 is omitted Number Character Description +CGEQREQ= ：Sets initial values to all <cid>. CONNECT Connected between the +CGEQREQ=<cid> ：Sets the speciﬁed <cid> 1200 FOMA terminal and PC at to the initial value. 1,200 bps. ・Execution example CONNECT Connected between the Only the following one pattern can be set, 2400 FOMA terminal and PC at 2,400 bps. which is set as an initial value to each cid. Requesting the connection at uplink 64kbps CONNECT Connected ...
Page 225 Result code display example ■ ATX0 is set Regardless of the AT¥Vn command (p.35) setting, only CONNECT is displayed when the connection is completed: Character example： ATD ＊ 99 ＊＊＊ 1# CONNECT Number example ： ATD ＊ 99 ＊＊＊ 1# 1 ■ ATX1 is set ・ATX1 and AT V0 are set (initial value) ¥ Displays in the following format when the connection is completed: Character example：...

NTT docomo SIMPURE N Foma N600i Manual

Table of Contents

Table of Contents

Quick Links

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NTT docomo SIMPURE N Foma N600i

Summary of Contents for NTT docomo SIMPURE N Foma N600i

Table of Contents