NTT docomo FOMA N702iS Manual page 443

Easy settings: "64K communication setting by using
mopera U or mopera"
d This section explains how to specify settings for 64K data communication at 64kbps. The DoCoMo
Internet connection service "mopera U" or "mopera" will be used as a provider.
d 64K Data Communication: The charges are based on the amount of time you connected. With
stable 64kbps communication speed, comfortable Internet access can be realized.
d Note that the communication charge becomes expensive if 64K data communication is used for a
long time.
Click " かんたん設定 " (Easy settings)
1
Select "64K データ通信 " (64K data communication) and click " 次へ "
2
(Next)
Select "『mopera U』への接続 " (mopera U access) or "『mopera』へ
3
の接続" (mopera access) and click "次へ " (Next)
See p.23 if you use a provider other than mopera U or mopera.
Enter the access point name and
4
select the modem, and click "次
へ " (Next)
The "64Kデータ通信設定 " (64K data
communication setting) screen appears. You
can specify the name of the connection. Enter a
name easy to recognize in the "接続名 "
(Connection name) column.
You cannot use the following reserved
characters: ¥/:＊ ?!<> │ (half-pitch only).
When using the FOMA USB Cable (optional),
confirm that modem name is set to "FOMA
N702iS".
Select the user
5
すべてのユーザー (All users) is
When
selected, the connection setting is applied to all
the users registered in Windows.
Specify a user name and
6
password and click "次へ" (Next)
You can leave user name and password blank
for the mopera U or mopera connection.
22