NTT docomo FOMA N702iS Manual page 439

How to Set Various Settings
The FOMA terminal needs to be connected to your PC via FOMA USB Cable (optional), and
the N702iS communication setting file (drivers) needs to be properly recognized on the device
of your PC to specify various settings.
Open " スタート " (Start) → " プロ
1
グラム" (Program) → "FOMA PC
設定ソフト " (FOMA PC setting
software) → "FOMA PC 設定ソフ
ト " (FOMA PC setting software)
This operation screen appears when the FOMA
PC setting software is started.
For Windows XP
Open " スタート " (Start) → " すべてのプログ
ラム " (All Programs) → "FOMA PC 設定ソフ
ト " (FOMA PC setting software) → "FOMA
PC 設定ソフト " (FOMA PC setting software)
Easy settings: "Packet communication setting by using
mopera U or mopera"
d This section explains how to make settings for a packet communication of 384kbps maximum. The
DoCoMo Internet connection service "mopera U" or "mopera" will be used as a provider.
Packet communication: Enables high-speed packet communication of up to 384kbps for receiving
and up to 64kbps for sending (there are exceptions for some machine types). Since you will be
charged according to the amount of data transferred, you can enjoy data communication without
worrying about time.
d Note that the communication charge can become expensive if packet communication is used to
communicate large volumes of data such as to view sites and websites containing images or to
download files.
Click " かんたん設定 " (Easy settings)
1
Select "パケット通信" (Packet communication) and click "次へ" (Next)
2
Select "『mopera U』への接続 " (mopera U access) or "『mopera』へ
3
の接続" (mopera access) and click "次へ " (Next)
See p.20 if you use a provider other than mopera U or mopera.
Click "OK"
4
The access point (APN) settings will be obtained from the FOMA terminal which is connected to the
PC. Wait for a while.
18