NTT docomo FOMA N702iS Manual page 440

Enter the connection name and
5
click " 次へ " (Next)
You can specify the name of the connection.
Enter a name easy to recognize in the " 接続名 "
(Connection name) column.
You cannot use the following reserved
characters: ¥/:＊ ?!<> │ (half-pitch only).
Select the user
6
When " すべてのユーザー " (All users) is
selected, the connection setting is applied to all
the users registered in Windows.
Specify a user name and
7
password and click "次へ" (Next)
You can leave user name and password blank
for the mopera U or mopera connection.
Check " 最適化を行う " (Optimize the setting) and click " 次へ " (Next)
8
Optimize "W-TCP 設定 " (W-TCP settings) required for "Packet communication". If they are already
optimized, this screen does not appear.
Check the setting information
9
and click " 完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "戻る " (Back).
Click "OK"
10
You need to restart the PC to enable the changes in the settings. If the restart selection screen
appears, click "はい " (Yes).
Execute communication.→ p.24
19