NTT docomo FOMA N702iS Manual page 297

Transferring One Data at a Time
You can exchange one data at a time with other
devices.
Sending one data <Send Ir data>
Select "Send Ir data" from the function menu of Data
list screen or detail screen.
<Example: Send one phonebook data>
Phonebook detail screen (P.106)
1
p (FUNC)
"Send Ir data"
Searching in the phonebook → P.105
Set the receiving device ready to
2
receive
Direct the Infrared data port toward
3
the other party's device
The data transmission starts.
■ To cancel sending
"NO"
■ To exit during sending
o(Quit)
● Send the personal data of your own
number
You can send "personal data of your own number"
(P.311) such as your phone number easily.
● When sending the personal data of your own number,
all the contents of the displayed icons are sent.
i0
1
The "Own number screen" appears.
■ To send all the personal data
p(FUNC) "Display all data" Enter your
security code
d (Send)
2
The "Send own data screen" appears and the sound
effect playback starts. The sound effect stops when the
data sending is completed.
Set the receiving device ready to
3
receive
4 Direct the Infrared data port toward
the other party's device
■ To cancel sending
N
You cannot change the sound effect played during sending.
The volume set in the "Phone" in the "Ring volume" setting is
used. (If "Phone" is set to "Step", melodies are played at the
volume of "Level 2".)
You cannot use the above operation to send the data when
"YES" you select "Send Ir data" from the function menu.
Receiving one data <Receive Ir data>
i79
1
The "Receive Ir data screen" appears.
"Receive"
2
port toward the other party's device
device
The data reception starts.
"YES"
3
The received data will be erased if you do not operate
Ｓｅｎｄ ｏｗｎ ｄａｔａ
your FOMA terminal at all for about 30 seconds after
you receive the data.
■ Not to save the received data
Ｆａｃｅ Ｉｒ ｄａｔａ ｐｏｒｔ
ｔｏ ａｎｏｔｈｅｒ ｏｎｅ
ｍｏｒｅ ｔｈａｎ ９０ ｄｅｇｒｅｅｓ
N
When the other party's device sends all the data, the FOMA
ＱＵＩＴ
Send own data
terminal enters Receive all status and you can receive all the
data by following the procedure.
1 Receive Ir data screen (P.295)
(FUNC)
Add desktop icon
Direct the Infrared data port toward the
other party's device and tilt a little.
The data sending starts.
o (Quit)
Direct the Infrared data
Receive data from the other party's
"NO"
Receive Ir data screen
Select any item:
......
"Using Desktop Icons" → P.132
Ｒｅｃｅｉｖｅ Ｉｒ ｄａｔａ
Ｒｅｃｅｉｖｅ
Ｒｅｃｅｉｖｅ ａｌｌ
Ｓｅｌｅｃｔ ＦＵＮＣ
Receive Ir data
Function menu P.295
p
295