NTT docomo FOMA N702iS Manual page 146

● Setting All lock by making a call
You can set the All lock function on your FOMA terminal by making a voice call or videophone call to the FOMA
terminal from a phone set as a "Accept phone No."
● Set "Remote all lock" to "ON" beforehand.
● All lock that has been set remotely can be released as described in "Releasing All lock". → P.143
● Releasing All lock does not set the Remote all lock setting to "OFF".
● When there are received calls from more than one registered Accept phone No., calls from the first received number
are counted as Received calls.
● You can set Remote all lock with voice or videophone calls.
● You need to notify the caller ID when calling from the number set as "Accept phone number".
● Calls received during another call (including received calls when "Call waiting" is activated) do not trigger the start of
monitoring time and are not counted as received calls.
Call the FOMA terminal from a phone number set as an "Accept phone No."
1
Confirm the call tone and then hang up (missed call)
2
Repeat steps 1 and 2 within the time set in "Monitoring (minutes)" until you have logged the number of missed calls set
in "Recv. calls (times)".
Listen to the answer message and then hang up
3
All lock is set on the FOMA terminal.
N
Even if the phone number set as an "Accept phone No." or a pay phone is set to "Call rejection", or even if you manually reject a call
from the accept phone number or forward the call to the Voice Mail Service Center or the call forwarding number, it is still counted as a
call for setting Remote all lock.
If the FOMA terminal is turned off or a call from the accept phone number is answered, the received call count is reset.
You can set Remote all lock even while Public mode (Driving mode) is set.
Store accept phone No. screen
Store accept phone No. screen (P.143) p(FUNC) Select any item:
1
Look-up address......Enters the address referring to the phonebook, Dialed and Received calls records.
Pay phone ......Sets calls from a pay phone as the accept phone number. "Pay phone" is displayed as the accept
phone number.
......Deletes one accept phone number. If there is no accept phone number stored, Remote all lock
Delete this
function is set to "OFF".
Delete all......Deletes all the accept phone numbers. Remote all lock function is set to "OFF".
144