General Information; Service; Cleaning - Kenwood TS-450S Instruction Manual

Hf transceiver / all mode multi bander
Hide thumbs Also See for TS-450S:
Table of Contents

Advertisement

76
6.
MAINTENANCE AND ADJUSTMENTS
6-1.
GENERAL INFORMATION
Your transceiver has been factory aligned and
tested to specification before shipment. Under
normal circumstances the transceiver will operate
in accordance with these operating instructions. All
adjustable trimmers and coils in your transceiver
were preset at the factory and should only be
readjusted by a qualified technician with proper
test equipment. Attempting service or alignment
without factory authorization can void the
transceiver's warranty.
When operated properly, the transceiver can give
years of service without requiring realignment. The
information in this section gives some general
service procedures which can be accomplished
without sophisticated test equipment.
6-2.
SERVICE
Should it ever become necessary to return the
equipment to your servicing dealer or KENWOOD
authorized service center for repair, pack it in its
original box and packing, and include a full
description of the problems involved. Also include
your telephone number. You need not return
accessory items unless directly related to the
service problem.
You may return your radio for service to the
Authorized KENWOOD
Dealer from whom you
purchased it. A copy of the service report will be
returned with the unit. Please do not send sub-
assemblies or printed circuit boards. Send the
complete unit, in its original boxes and packing.
Tag all returned items with your name and call for
identification. Please mention the model and serial
number of your radio in any correspondence,
whether phone or written. For future reference,
record this information in the space provided on
the back cover of this manual.
[
i Service note
Dear OM, if you desire to correspond on a
technical or operational problem, please make your
note short, complete, and to the point. And
| PLEASE make it readable.
: Please list:
Model and serial number.
|
The question or problem you аге
having.
Please give sufficient detail to diagnose : other
equipment in the station, meter readings and
anything you feel might be useful in attempting
| diagnosis.
Caution
Do not pack the equipment in crushed newspapers
| for shipment! Extensive damage may result.
pose)
as
ЕЕ
|
| Notes
1. Record the date of purchase, serial number and
dealer from whom purchased.
2. For your own information, retain a written record
of any maintenance performed on the unit.
3. When claiming warranty service, please include
a photocopy of the bill of sale, or other proof of
purchase showing the date of sale.
6-3.
CLEANING
The knobs, front panel and cabinet of the
transceiver are likely to become soiled after
extended use. The knobs should be removed from
the transceiver and cleaned with a neutral soap
and warm water. Use a neutral soap (not harsh
chemicals) and damp cloth to clean the cabinet
and front panel.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts-690s

Table of Contents