Optional Accessories; Ctcss Unit Tsu-6; Remote Controller - Kenwood TM-701A Instruction Manual

7. OPTIONAL ACCESSORIES
7-1-1. CTCSS unit TSU-6
The use of the optional sub-audible tone decoder TSU-6 al-
lows for CTCSS Tone Squelch operation. When this option
is active squelch will only open when the proper tone is
received.
Installation
Caution:
Before installation be sure to disconnect the DC power sup-
ply, or battery or damage may occur to the equipment.
1. Remove the 6 screws securing the Top cover.
2. Gently remove the top cover. (Fig. 1)
3. Remove the backing from the small cushion provided with
the TSU-6 and attach it to the back of the TSU-6 as
shown in Fig. 2.
4. Attach the cable from the TSU-6 as shown in the
diagram.
5. Remove the backing from the other side of the small
cushion and attach the TSU-6 to the transceiver as
shown.
6. Replace the cover and tighten the screws to complete
the installation.
32
Fig. 2
7-1-2. Remote Controller RC-10
¢ To operate the transceiver with the RC-10 press and hold
the CALL key on the transceiver and then turn on the
POWER switch.
To select the CALL channel when using the RC-10 press
the F key on the RC-10 and then the VFO key.
Please refer to the instructions provided with the RC-10
for a description of the other RC-10 functions.