Transmission/ Reception/ Repeat; Transmit And Receive Frequencies; Transmission Power (Transmit Power) - Kenwood TKR-D710 Function Reference

4

TRANSMISSION/ RECEPTION/ REPEAT

4.1

Transmit and Receive Frequencies

Transmit and receive frequencies are pairs of frequencies used for transmitting and receiving by the repeater. The
transmit and receive frequencies of the repeater can be configured for each channel.
Configuration using KPG-174D
Configuring the transmit and receive frequencies for a channel (
4.2

Transmission Power (Transmit Power)

Transmit Power is the transmission power of the repeater. The transmission power of the repeater can be
configured for each channel.
If a channel with "High" configured in Transmit Power is selected, the transmission power can be switched to high
power or low power when a PF key is operated, when a signal is applied to an AUX Input port, or when the repeater
is turned on.
Trigger
PF key
AUX Input Port
Startup
Configuration using KPG-174D
Configuring Transmit Power (
FUNC (E)/Ver 2.50
Table 4-1 Transmit/ Receive Frequency Range and Step Size
Model
TKR-D710
TKR-D810
Table 4-2 Transmit Power
Model
TKR-D710
TKR-D810
Table 4-3 Switching the Transmission Power
Assigned Function
Low Power On/Off
Low Power Off
Low Power On
Low Power On/Off
Low Power Off
Low Power On
Edit > Channel Information > Channel Edit)
See
Transmit and Receive Frequencies
Range
2.5 kHz/ 3.125 kHz/ 5 kHz/
136 MHz to 174 MHz
400 MHz to 470 MHz
Edit > Channel Information > Channel Edit)
See
Transmit Power
Low
5 W
5 W
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
In steps of
6.25 kHz
3.125 kHz/ 5 kHz/
6.25 kHz
High
50 W
40 W
See
CONTENTS INDEX 13