Front panel
13.3.3 Replacing the front VGA board
Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
13.3.3.1 Preliminary steps
"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
"Removing the front panel module" on page 275
Ê
13.3.3.2 Removing the defective front VGA board
Ê Remove the front VGA board as described in section
VGA board" on page
13.3.3.3 Installing the new front VGA board
Ê Install the front VGA board as described in section
board" on page
13.3.3.4 Concluding steps
"Installing the front panel module" on page 278
Ê
"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Switching on the server" on page 61
Ê
284
283.
281.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the front
"Installing the front VGA
RX2530 M1