Installing A Psu; Preliminary Steps; Removing The Psu Dummy Module - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Power supply unit (PSU)
6.2

Installing a PSU

Customer Replaceable Unit
(CRU)
Tools: tool-less
6.2.1

Preliminary steps

No steps needed.
6.2.2

Removing the PSU dummy module

Figure 64: Removing a PSU dummy module
Ê Press in on both locking latches on the PSU dummy module (1) and carefully
detach the dummy module from its slot.
Ê Remove the dummy module from its slot (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a PSU dummy cover must be
replaced in the slot to comply with applicable EMC regulations and
satisfy cooling requirements.
146
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX2560 M2 / RX2560 M2