Installing A Psu; Preliminary Steps; Removing The Dummy Cover - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Power supply unit (PSU)
6.2.1

Installing a PSU

Customer Replaceable Unit
(CRU)
Tools: tool-less
6.2.1.1

Preliminary steps

No steps needed.
6.2.1.2

Removing the dummy cover

Figure 62: Removing the PSU dummy cover
Ê Press in on both release latches (1) and remove the dummy cover (2).
V
CAUTION!
Keep the dummy cover for future use. If a PSU is removed and not
immediately replaced by a new one, a dummy cover must be reinstalled
in the bay to comply with applicable EMC regulations and satisfy cooling
requirements.
140
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX2550 M4