7.4.6
Replacing the 4x 2.5-inch HDD backplane (rear)
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the switch board tray" on page 54
▶ Remove all HDD/SSD modules, see
module" on page
CAUTION
The HDD modules need not to be removed.
▶
If you want to remove them nevertheless, check if all HDD
modules are uniquely identified so that you can reinsert them
into their original bays.
GX2570 M6
Hard disk drive (HDD) / solid state disk (SSD)
93.
Upgrade and Maintenance Manual
Hardware: 10 minutes
39.
40.
40.
41.
"Removing a 2.5-inch HDD/SSD
99