Replacing A Rear 2X 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Installing additional HDD/SSD/PCIe SSD modules
▶ Insert additional HDD/SSD modules, see
modules" on page 177
SSD modules" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Using the Chassis ID Prom Tool" on page
corresponding system name.
▶
"Performing a RAID array rebuild" on page
7.9.4

Replacing a rear 2x 2.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
236
or PCIe SSD modules, see
185.
59.
65.
71.
50.
Upgrade and Maintenance Manual
"Installing 2.5-inch HDD/SSD
"Installing 2.5-inch PCIe
113. Select the
108.
Hardware: 10 minutes
47.
50.
55.
71.
49.
RX2540 M7