Removing The Air Grid - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

12.4.1.2 Removing the air grid

Figure 189: Removing the air grid
Ê Remove the 4 screws.
I
Keep the 4 screws - they will be used again for fixing the LTO drive.
Ê Remove the air grid.
V
CAUTION!
Save the dummy cover (air gird) for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
RX2520 M4
Upgrade and Maintenance Manual
Accessible drives
289