Basic hardware procedures
4.7
Switching on the server
CAUTION
▶
Before switching on the server, make sure the top cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top cover is removed.
▶
For more information, see
▶ Press the On/Off button to start up the server.
▶ Ensure that the power-on indicators of the PSUs are lit green.
4.8
Handling the air duct
4.8.1
Removing the air duct
Required steps before:
– Extending the server out of the rack
– Removing the server from the rack
– Removing the cover 2
58
"Important information" on page
Upgrade and Maintenance Manual
25.
GX2560 M7