Handling The Rear Air Grids; Removing A Rear Air Grid - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.14

Handling the rear air grids

4.14.1

Removing a rear air grid

Removing the rear air grid 1
Figure 35: Removing the rear air grid 1
▶ Remove the two screws (see circles).
▶ Remove the rear air grid.
CAUTION
Keep the rear air grid for future use.
▶
Always replace rear air grids into unused installation locations to
comply with applicable EMC regulations and satisfy
coolingrequirements.
82 Upgrade and Maintenance Manual RX2540 M6