Removing The Rear Air Grid (Left Hand) - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
7.6.2.2

Removing the rear air grid (left hand)

Figure 131: Removing the rear air grid
Ê Remove three screws (see circles).
Ê Remove the rear air grid.
V
CAUTION!
Keep the rear air grid for future use.
Always replace rear air grids into unused installation locations to
comply with applicable EMC regulations and satisfy cooling
requirements.
230 Upgrade and Maintenance Manual
RX2540 M2