Print; Abort The Printout (Remote Command Only) - Agilent Technologies PSA Series User And Programming Manual

4.3 Print

Initiates an output of the display data to the currently defined printer. The screen remains
frozen (no further sweeps are taken) until the data transfer to the printer is complete.
Refer to the key description for
printer functions.
There must be a valid printer set up for the print function to work. The Getting Started
Guide includes additional printer installation information.
If you need to abort a print in progress, use the
Key Path: Front-panel key
Remote Command:
:HCOPy[:IMMediate]
Example:
HCOPY

4.3.1 Abort the Printout (Remote Command Only)

This command aborts the print that is currently in process.
Remote Command:
:HCOPy:ABORt
Example:
HCOP:ABOR
Chapter 4
Print Setup on page 215
(escape) key.
Esc
Instrument Functions: P - Z
for more information about the
Print
215