Setting Print Only - Agilent Technologies U1701B User's And Service Manual

Default Setting Configurations 3

Setting Print Only

If the remote interface of the meter is under print- only mode, the meter
will print out only the measured data when the measuring cycle is
completed. The meter will auto- send the latest data to a host
continuously. The meter will not accept any commands from the host
when print- only is enabled. The remote indicator of the meter will be
flashed during operation as Print- only ON. To enable the print- only, refer
to Figure 3- 5.
Figure 3-5 Print-only Setup
U1701B User's and Service Guide 39