Agilent Technologies PSA Series User And Programming Manual page 163

Remote Command:
[:SENSe]:MIXer:HARMonic:AUTO OFF|ON|0|1 or <boolean>
[:SENSe]:MIXer:HARMonic:AUTO?
[:SENSe]:MIXer:HARMonic <integer>
[:SENSe]:MIXer:HARMonic?
Example:
MIX:HARM:AUTO 0
MIX:HARM 8
2.8.9.2 Mixer Type
Selects which type of mixer is in use.
routed to the
PRESEL TUNE OUTPUT
signal has a sensitivity of 1.5V/GHz of the LO frequency and drives the tune input of the
HP/Agilent 11974 series of preselected mixers. The sweep rate in
40 MHz/ms.
Key Path:
Input/Output
Dependencies/
Couplings: Only available in bands A, Q, U and V, and only when
State Saved: Saved in Instrument State
Factory Preset: Unpre
Remote Command:
:INPut:MIXer:TYPE PRESelected|UNPReselect
:INPut:MIXer:TYPE?
Example:
INP:MIX:TYPE UNPR
Chapter 2
Mixer Type (Presel)
connector on the rear panel of the analyzer. This
, ,
External Mixer Mixer Config
Instrument Functions: A - L
activates a tuning signal that is
mode is limited to
Presel
Mixer Bias
Input/Output
is off.
163