Programming Fundamentals
Using the LAN to Control the Instrument
Options and Parameters -r Bypasses the routing tables, and sends the
-v
-o
host
packetsize
count
EIA/TIA 568B Wiring Information
Table 5-3
Straight-Through Cable (Unshielded-twisted-pair (UTP) cable with RJ-45
connectors)
Standard, Straight-Through Wiring (each end)
Signal Name
RX+
RX-
TX+
TX-
Not
Used
330
request directly to the host.
Reports all packets that are received, including the response
packets.
Requests information about the network paths taken by the
requests and responses.
The host name or IP address.
The size of each packet (8 bytes - 4096 bytes).
The number of packets to send before ending ping (1-(2
If count is not specified, ping sends packets until
interrupted.
RJ-45 Pin #
Wire Color
1
white/orange
2
orange
3
white/green
6
green
4
blue
5
white/blue
7
white/brown
8
brown
31
-1)).
Pair #
2
3
1
4
Chapter 5