Agilent Technologies PSA Series User And Programming Manual page 245

SYST:PON:TYPE LAST defines the power on type as the last state the
Example:
analyzer was in before power was turned off.
SYST:PON:TYPE?
4.9.2.2 Preset Type
Enables you to select what type of preset will be initiated when you press the green
key or send the remote command, using SYST:PRES. Choose between Factory, Mode, or
User defined presets.
Key Path:
System
Survives
State Saved:
SCPI Status Bits/
OPC Dependencies: None
Preset: Does not change the Preset Type.
Factory
Default: Mode
Remote Command:
:SYSTem:PRESet:TYPE FACTory|USER|MODE
:SYSTem:PRESet:TYPE?
Remote Command Notes: SYSTem:PRESet:USER:SAVE defines the user preset.
Example: SYST:PRES:TYPE FACT defines the type of preset as the factory preset.
4.9.2.2.1 User
Sets the preset type to
defined as the user preset setting will be restored. Use the
your user preset settings. Refer to
not saved a user state, then the instrument will save the power-up state for you to use as a
default user preset state.
Key Path:
System
Readback: User
Annunciation/
Annotation: None
State Saved: Survives
SCPI Status Bits/
OPC Dependencies: None
Factory
Chapter 4
,
Power On/Preset
and power cycle, but is not saved in Instrument State.
Preset
. When you do a preset, the instrument state that you have
User
"Preset" on page 211
, ,
Power On/Preset Preset Type
and power cycle, but no saved in Instrument State.
Preset
Instrument Functions: P - Z
key to define
Save User Preset
for more information. If you have
System
Preset
245