Agilent Technologies PSA Series User And Programming Manual page 46

Instrument Functions: A - L
AMPLITUDE / Y Scale
2.1.8.11 dBpT
Sets the amplitude units to dBpT. This is a unit specifically applicable to EMI field
strength measurements. In the absence of a correction factor this unit is treated by the
instrument exactly as though it were dB µ V. You must load an appropriate correction factor
using amplitude corrections for this unit to generate meaningful results. Therefore, this
key is grayed out unless one of the corrections are turned on (in
menu) and
Apply Corrections
Key Path:
AMPLITUDE / Y Scale
Dependencies/
Couplings: If the grayed out key is pressed an error message is generated.
History: Added with firmware revision A.06.00
Remote Command:
See "Y Axis Units" on page
Example:
UNIT:POW DBPT
2.1.8.12 dBG
Sets the amplitude units to dBG. This is a unit specifically applicable to EMI field strength
measurements. In the absence of a correction factor this unit is treated by the instrument
exactly as though it were dB µ V. You must load an appropriate correction factor using
amplitude corrections for this unit to generate meaningful results. Therefore, this key is
grayed out unless one of the corrections are turned on (in
is set to Yes.
Apply Corrections
Key Path:
AMPLITUDE / Y Scale
Dependencies/
Couplings: If the grayed out key is pressed an error message is generated.
History: Added with firmware revision A.06.00
Remote Command:
See "Y Axis Units" on page
Example:
UNIT:POW DBG
46
is set to Yes.
, ,
More Y Axis Units
41.
, ,
More Y Axis Units
41.
,
Amplitude Corrections
,
Amplitude Corrections
menu) and
Chapter 2