Agilent Technologies PSA Series User And Programming Manual page 102

Instrument Functions: A - L
Display
Remote Command:
:CALCulate:LLINe[1]|2:MARGin:STATe OFF|ON|0|1 turns on margins on or off. If the
margin and limit display are both turned off, limit test is automatically turned off.
:CALCulate:LLINe[1]|2:MARGin:STATe?
Responds with the margin state; 0 = off 1 = on.
:CALCulate:LLINe[1]|2:MARGin <ampl_rel>
Defines the amount of measurement margin that is added to the designated limit line.
:CALCulate:LLINe[1]|2:MARGin?
Responds with the margin offset value.
2.5.5.1.5 Edit
Pressing accesses menus for editing limit lines and for accessing the limit-line table
Edit
editor. Navigation through the limit-line table is achieved by using the front-panel arrow
and tab keys. Entering data in each field navigates to the next field. New limit segments
will only be applied after the editor is closed.
Pressing , or any key that is not associated with the editor, will close the limit-line
Return
table editor.
Refer to your Getting Started guide for more information about navigation
NOTE
within tables using your front-panel arrow and tab keys.
Key Path:
Display
Display
Factory Preset
and *RST: Exits the edit mode.
History: Added with firmware revision A.03.00
102
, ,
Limits Limit 1
, ,
Limits Limit 2
Chapter 2