Directions For Use - Agilent Technologies PSA Series User And Programming Manual

Menu Maps: Spectrum Analysis

Directions for Use

Directions for Use
Refer to the following notes to utilize the key-flow diagrams:
• Start from the upper left corner of each measurement diagram. Go to the right, and go
from the top to the bottom.
• When changing a key from auto (with underline) to manual, just press that key one
time.
• When entering a numeric value for frequency, a value with units, use the numeric
keypad and terminate the entry with the appropriate unit selection from the softkeys
displayed.
• When entering a numeric value for a unitless value, like Avg Number, use the numeric
keypad and terminate the entry with the
• Instead of using the numeric keypad to enter a value, it may be easier to use the
front-panel knob or
Table 7-1 Menu Map Legend
Icon Description
This represents the analyzer front-panel key.
An oval represents additional levels of menus.
This box shows how the softkey default condition is displayed. Default
parameters or values are underlined wherever possible.
$'& 'LWKHU
PÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃPss
A dagger to the lef of a softkey indicates that when the key is pressed this
is an active function.
A double-dagger to the left of the softkey indicates a function that is not
always available. It is dependent on other instrument settings.
A bar on the left of two or more softkeys indicates that the keys are a
mutually exclusive choice.
388
Enter
arrow keys.
Up/Down
front-panel key.
Chapter 7