Agilent Technologies PSA Series User And Programming Manual page 159

2.8.6.12 220-325 GHz (J)
Selects J band (mixing harmonic -46). Displays the start and stop frequencies for that
particular band. Other start/stop frequencies are available as long as they are within the
-46 harmonic band.
Key Path:
Input/Output
Remote Command:
Example:
MIX:BAND J
2.8.6.13 User
Lets you define the frequency band for your Input Mixer. The frequencies available depend
on the currently selected harmonic mixing number. Use
particular harmonic number.
Equation 2-1 Preselected External Mixer Frequency Ranges vs. Harmonic
Number
For N
For N
Equation 2-2 Unpreselected External Mixer Frequency Ranges vs. Harmonic
Number
For N
For N
The 650 MHz term in the equations above is approximately 2XIF. This term
NOTE
is for the signal identification algorithm. The 6.666 GHz term is the
maximum LO range based on the preselector tune circuitry in the analyzer.
Saved State Saved in instrument state
Key Path:
Input/Output
Chapter 2
, ,
Input Mixer Ext Mix Band
= positive harmonic mixing band numbers:
Minimum frequency =
Maximum frequency =
= negative harmonic mixing band numbers:
Minimum frequency =
Maximum frequency =
= positive harmonic mixing band numbers:
Minimum frequency =
Maximum frequency =
= negative harmonic mixing band numbers:
Minimum frequency =
Maximum frequency =
, ,
External Mixer Ext Mix Band
,
Mixer Config Harmonic
( × )
N 2.9GHz + 321.4MHz
( × )
N 6.666GHz + 321.4MHz 650
( × ) 321.4MHz
N 2.9GHz –
( × ) 321.4MHz
N 6.666GHz –
( × )
N 2.9GHz + 321.4MHz
( × )
N 6.9GHz + 321.4MHz 650
( × ) 321.4MHz
N 2.9GHz –
( × ) 321.4MHz
N 6.9GHz –
Instrument Functions: A - L
Input/Output
to select a
– MHz
+ 650MHz
– MHz
+ 650MHz
159