Restart - Agilent Technologies PSA Series User And Programming Manual

4.4 Restart

This function restarts a previously paused measurement at the beginning. If the
measurement is active, it will stop it as soon as possible and restart it from the
beginning.If no measurement is active and
initiated.
When in
Average (On)
trace is reset and the average number is reset to zero).
Key Path: Front-panel key. It can also be found under
Remote Command:
:INITiate:RESTart
Remote Command Notes: This command is equivalent to sending an :ABORt command
followed by an :INITiate[:IMMediate] command.
or Measurement (Remote Command Only)" on page 194.
information.
Example:
INIT:REST
Chapter 4
Sweep (Single)
mode, ( ,
BW/Avg Average
is selected, a new sweep is
) the averaging function is restarted (the
Meas Control
Instrument Functions: P - Z
Restart
.
See "Abort the Sweep
for more
221