4.10.3 Clear Write
Erases any data previously stored in the selected trace and continuously displays signals
during the sweep of the analyzer.
Key Path:
Trace/View
Remote Command:
See
"Trace/View" on page
Example:
TRAC:MODE WRIT
4.10.4 Max Hold
Maintains the maximum level for each trace point of the selected trace (1, 2 or 3), and
updates each trace point if a new maximum level is detected in successive sweeps.
Pressing
NOTE
Lin) or turning averaging on (
Key Path:
Trace/View
Remote Command:
See
"Trace/View" on page
Example:
TRAC:MODE MAXH
4.10.5 Min Hold
Maintains the minimum level for each trace point of the selected trace (1, 2 or 3), and
updates each trace point if a new minimum level is detected in successive sweeps.
Pressing
NOTE
Lin) or turning averaging on (
Key Path:
Trace/View
History:
Added with firmware revision A.02.00
Remote Command:
See
"Trace/View" on page
Example:
TRAC:MODE MINH
Chapter 4
277.
, changing the vertical scale (
Restart
BW/Avg
277.
, changing the vertical scale (
Restart
BW/Avg
277.
Instrument Functions: P - Z
,
Amplitude
Scale Type
,
) restarts the held trace.
Average (On)
,
Amplitude
Scale Type
,
) restarts the held trace.
Average (On)
Trace/View
, Log or
, Log or
279