Agilent Technologies PSA Series User And Programming Manual page 311

-B
server-host the name or address of the remote host.
This table lists the available user commands.
Table 5-2 ftp Commands
Command
ascii
binary
bye
cd remote_directory
delete remote_file
dir
[remote_directory]
get remote_file
[local_file]
help
help command
image
lcd [local_directory]
ls
[remote_directory]
mget remote_file
[local_file]
mput local_file
[remote_file]
put local_file
[remote_file]
quit
Chapter 5
specifies a new DataSocketBufferSize
Description
Sets the file transfer type to ASCII.
Sets the file transfer type to binary.
Closes the connection to the host and exits ftp.
Sets the working directory on the host to remote_directory.
Deletes remote_file or empty remote_directory.
Lists the contents of the specified remote_directory. If
remote_directory is unspecified, the contents of the current
remote directory are listed.
Copies remote_file to local_file. If local_file is unspecified,
ftp uses the remote_file name as the local_file name.
Provides a list of ftp commands.
Provides a brief description of command.
Sets the file transfer type to binary.
Sets the local working directory to local_directory.
Lists the contents of the specified remote_directory. If the
remote_directory is unspecified, the contents of the current
remote directory are listed.
Copy remote_file to the local system. If local_file is
unspecified, ftp uses the remote_file name as the local_file
name.
Copies local_file to remote file. If remote_file is unspecified,
ftp uses the local_file name as the remote_file name.
Copies local_file to remote file. If remote_file is unspecified,
ftp uses the local_file name as the remote_file name.
Closes the connection to the host and exits ftp.
Programming Fundamentals
Using the LAN to Control the Instrument
311