Table of Contents
Advertisement
3
4
5
Results
The solution results are displayed on the Results page - see Page 64.
Print the results
You can print the solution results to an external printer, using the RS-232 9-pin
cable to connect the instrument to your PC or printer.
Figure 40. RS-232 9-pin socket located on the rear of the instrument
If the printer is not a serial printer, use a serial to parallel converter.
To print the results:
1
2
3
4
Agilent 55B AA Spectrometer User's Guide
Press the Results key.
Ensure the diluent tubing is connected to the Mariott vessel.
Place the pump tubing in the appropriate sample and press the Read key.
Go to Options page > Printer > Text .
Set the required 'Baud rate' and 'Lines per page'.
Ensure the instrument is connected to the printer.
Press the Read key to measure the current solution.
As each solution is measured, the result will be sent to the printer.
Operation
89
Advertisement
Table of Contents
